Search

Carbon dots (CDs) have been studied for years as one of the most promising fluorescent nanomaterials. However, CDs with red or solid-state fluorescence are rarely reported. Herein, through a one-pot solvothermal treatment, hydrophobic CDs (H-CDs) with blue dispersed emission and red aggregation-induced emission are obtained. When water is introduced, the hydrophobic interaction leads to aggregation of the H-CDs. The formation of H-CD clusters induces the turning off of the blue emission, as the carbonized cores suffer from π-π stacking interactions, and the turning on of the red fluorescence, due to restriction of the surfaces’ intramolecular rotation around disulfide bonds, which conforms to the aggregation-induced-emission phenomenon. This on-off fluorescence of the H-CDs is reversible when the H-CD powder is completely dissolved. Moreover, the H-CD solution dispersed in filter paper is nearly colorless. Finally, we develop a reversible two switch-mode luminescence ink for advanced anti-counterfeiting and dual-encryption., Carbon dots that display long-wavelength and multicolor emission are desirable for biological and anti-counterfeiting applications. Here, the authors design hydrophobic carbon dots with reversible two-mode fluorescence, which exhibit blue emission when dissolved in solution, and red solid-state fluorescence when aggregated.

Root nodules are agricultural-important symbiotic plant-microbe composites in which microorganisms receive energy from plants and reduce dinitrogen (N2) into fertilizers. Mimicking root nodules using artificial devices can enable renewable energy-driven fertilizer production. This task is challenging due to the necessity of a microscopic dioxygen (O2) concentration gradient, which reconciles anaerobic N2 fixation with O2-rich atmosphere. Here we report our designed electricity-powered biological|inorganic hybrid system that possesses the function of root nodules. We construct silicon-based microwire array electrodes and replicate the O2 gradient of root nodules in the array. The wire array compatibly accommodates N2-fixing symbiotic bacteria, which receive energy and reducing equivalents from inorganic catalysts on microwires, and fix N2 in the air into biomass and free ammonia. A N2 reduction rate up to 6.5 mg N2 per gram dry biomass per hour is observed in the device, about two orders of magnitude higher than the natural counterparts., Root nodules are of key importance in nitrogen fixation. Here, the authors report on an electrically powered artificial root nodule for nitrogen fixation made from silicon-based microwires which can accommodate nitrogen fixing symbiotic bacteria for fixing nitrogen into biomass and free ammonia.

The high thermal conductivity of graphene and few-layer graphene undergoes severe degradations through contact with the substrate. Here we show experimentally that the thermal management of a micro heater is substantially improved by introducing alternative heat-escaping channels into a graphene-based film bonded to functionalized graphene oxide through amino-silane molecules. Using a resistance temperature probe for in situ monitoring we demonstrate that the hotspot temperature was lowered by ∼28 °C for a chip operating at 1,300 W cm−2. Thermal resistance probed by pulsed photothermal reflectance measurements demonstrated an improved thermal coupling due to functionalization on the graphene–graphene oxide interface. Three functionalization molecules manifest distinct interfacial thermal transport behaviour, corroborating our atomistic calculations in unveiling the role of molecular chain length and functional groups. Molecular dynamics simulations reveal that the functionalization constrains the cross-plane phonon scattering, which in turn enhances in-plane heat conduction of the bonded graphene film by recovering the long flexural phonon lifetime., The high thermal conductivity of graphene is considerably reduced when the two-dimensional material is in contact with a substrate. Here, the authors show that thermal management of a micro heater is improved using graphene-based films covalently bonded by amino-silane molecules to graphene oxide.

The interest in mechanical properties of two-dimensional materials has emerged in light of new device concepts taking advantage of flexing, adhesion and friction. Here we demonstrate an effective method to measure adhesion of graphene atop highly ordered pyrolytic graphite, utilizing atomic-scale ‘blisters' created in the top layer by neon atom intercalates. Detailed analysis of scanning tunnelling microscopy images is used to reconstruct atomic positions and the strain map within the deformed graphene layer, and demonstrate the tip-induced subsurface translation of neon atoms. We invoke an analytical model, originally devised for graphene macroscopic deformations, to determine the graphite adhesion energy of 0.221±0.011 J m−2. This value is in excellent agreement with reported macroscopic values and our atomistic simulations. This implies mechanical properties of graphene scale down to a few-nanometre length. The simplicity of our method provides a unique opportunity to investigate the local variability of nanomechanical properties in layered materials., Analysis of the mechanical properties of two-dimensional materials is important for device development. Here, the authors report a microscopic method for measuring the adhesion of graphene on top of highly ordered pyrolytic graphite, which exploits atomic-scale blisters formed upon neon atom intercalation.

Herein, we report on a significant discovery, namely, the quantitative discharging of reduced graphite forms, such as graphite intercalation compounds, graphenide dispersions and graphenides deposited on surfaces with the simple solvent benzonitrile. Because of its comparatively low reduction potential, benzonitrile is reduced during this process to the radical anion, which exhibits a red colour and serves as a reporter molecule for the quantitative determination of negative charges on the carbon sheets. Moreover, this discovery reveals a very fundamental physical–chemical phenomenon, namely a quantitative solvent reduction induced and electrostatically driven mass transport of K+ ions from the graphite intercalation compounds into the liquid. The simple treatment of dispersed graphenides suspended on silica substrates with benzonitrile leads to the clean conversion to graphene. This unprecedented procedure represents a rather mild, scalable and inexpensive method for graphene production surpassing previous wet-chemical approaches., Graphite intercalation compounds are promising precursors for the reductive exfoliation of graphene. Here, the authors unveil the discharging mechanism of reduced graphitic compounds in a solid/liquid phase reaction, and further demonstrate its practical use for graphene production.

Rising petroleum costs, trade imbalances and environmental concerns have stimulated efforts to advance the microbial production of fuels from lignocellulosic biomass. Here we identify a novel biosynthetic alternative to D2 diesel fuel, bisabolane, and engineer microbial platforms for the production of its immediate precursor, bisabolene. First, we identify bisabolane as an alternative to D2 diesel by measuring the fuel properties of chemically hydrogenated commercial bisabolene. Then, via a combination of enzyme screening and metabolic engineering, we obtain a more than tenfold increase in bisabolene titers in Escherichia coli to >900 mg l−1. We produce bisabolene in Saccharomyces cerevisiae (>900 mg l−1), a widely used platform for the production of ethanol. Finally, we chemically hydrogenate biosynthetic bisabolene into bisabolane. This work presents a framework for the identification of novel terpene-based advanced biofuels and the rapid engineering of microbial farnesyl diphosphate-overproducing platforms for the production of biofuels., Advanced biofuels with comparable properties to petroleum-based fuels could be microbially produced from lignocellulosic biomass. In this study, Escherichia coli is engineered to produce bisabolene, the immediate precursor of bisabolane, a biosynthetic alternative to D2 diesel.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

An amendment to this paper has been published and can be accessed via a link at the top of the paper