Search

The state-of-the-art perovskite solar cells (PSCs) with SnO

Defects caused by the structural disorder of perovskites and voltage loss resulting from mismatched band structure are important issues to address to improve the performance of carbon-based perovskite solar cells. Different from the conventional approaches of additive-based passivation of perovskite precursors and introducing a hole-transport layer between the perovskite layer and carbon electrode, herein we report a defect-healing method using phenethyl ammonium iodide (PEAI) treatment and band-structure modification using high-work-function inorganic copper phthalocyanine (CuPc). Because of its relatively smoother surfaces and lower defect content, the optimized device after PEAI-based passivation of the perovskite achieves a power conversion efficiency (PCE) of 11.74%. The PCE is further raised to 13.41% through the auxiliary energy-level matching and high hole extraction abilities of the CuPc-modified carbon electrode. The best-performing device exhibits excellent moisture tolerance and thermal stability with minor current density–voltage hysteresis.

Graphene and Au nanorods (AuNRs) coated with SiO

The state-of-the-art perovskite solar cells (PSCs) with SnO2 electron transporting material (ETL) layer displays the probability of conquering the low electron mobility and serious leakage current loss of the TiO2 ETL layer in photoelectronic devices. The rapid development of SnO2 ETL layer has brought perovskite efficiencies >20%. However, high density of defect states and voltage loss of high temperature SnO2 are still latent impediment for the long-term stability and hysteresis effect of photovoltaics. Herein, Nb5+ doped SnO2 with deeper energy level is utilized as a compact ETL for printable mesoscopic PSCs. It promotes carrier concentration increase caused by n-type doping, assists Fermi energy level and conduction band minimum to move the deeper energy level, and significantly reduces interface carrier recombination, thus increasing the photovoltage of the device. As a result, the use of Nb5+ doped SnO2 brings high photovoltage of 0.92 V, which is 40 mV higher than that of 0.88 V for device based on SnO2 compact layer. The resulting PSCs displays outstanding efficiency of 13.53%, which contains an ∼10% improvements compared to those without Nb5+ doping. Our study emphasizes the significance of element doping for compact layer and lays the groundwork for high efficiency PSCs.

Facile engineering ultrathin nano structural materials is still a huge challenge for material science. Thereinto, the strategy of exfoliating shows great advantages. In this work, we develop a convenient approach to exfoliate Co(OH)

The Au nanoparticle sandwich double spheric-shells of SiO

The Au nanoparticle sandwich double spheric-shells of SiO2@Au@TiO2 (SAT) microspheres are synthesized. The significant influence of the SAT microspheres on the properties of dye-sensitized solar cells (DSSCs) is investigated. Studies indicate that the introduction of SAT markedly enhanced the light scattering and capture ability of DSSCs and thus photogenerated electrons. DSSCs doped with 2.25 wt% SAT exhibit a maximum short circuit current density of 17.0 mA cm-2 and photoelectric conversion efficiency of 7.14%, which are remarkably higher than those of conventional DSSCs at 15.7% and 21.2%, respectively. The marked enhancement in the performance of the optimal DSSCs can be attributed to the synergetic complementary effect of the enhanced light scattering of the microspheres and to the localized surface plasmon resonance of the Au nanoparticles in the SAT, and is a novel promising way of enhancing the performance of DSSCs.

A high-performance supercapacitor electrode is designed and fabricated with the 3D interconnected continuous nanoporous Co/CoO core-shell hybrid nanostructure grown on nickel foam. The Co/CoO core-shell hybrid nanostructures are obtained via a hydrothermal method, followed by high-temperature annealing in hydrogen atmosphere, and finally placed in air at 50 °C for 1 h. The Co/CoO core-shell nanostructure assembled by a conductive metal-core and a CoO shell, brings low resistance, high specific capacitance of 5.632 F cm-2 and good capability stability (81.5% capacitance retention after 6000 cycles). An asymmetric supercapacitor device built by the Co/CoO (positive electrode) and activated carbon (negative electrode) can deliver a working voltage of 1.7 V and display a high energy density of 0.002 67 Wh cm-2 at a power density of 0.001 62 W cm-2, which is far superior to that of a supercapacitor at a similar power density.

Nanobelts of nickel hydroxyl sulfate have been prepared on a large scale via a simple template-free hydrothermal reaction on the basis of a complex [Ni(NH(3))(6)](2+) formed with Ni(2+) and ammonia in an ethanol-water solution. The as-synthesized nanobelts were single crystals, with several tens of microns in length and 50-150 nm in width. The nanobelts were enclosed by top surfaces (100) and side surfaces (001) and their growth direction was parallel to [010]. The function of aqueous ammonia and ethanol was discussed. Furthermore, nanostructures of a mixture of crystralline NiO and amorphous nickel sulfate with various morphologies, such as nanobelts, porous nanobelts, and nanoparticles, were obtained by the thermal treatment of the as-synthesized Ni(SO(4))(0.3)(OH)(1.4) nanobelts at different temperatures.

This paper describes a facile solvothermal method to synthesize self-assembled three-dimensional (3D) Ni2+-Fe3+ layered double hydroxides (LDHs). Flower-like Ni2+-Fe3+ LDHs constructed of thin nanopetals were obtained using ethylene glycol (EG) as a chelating reagent and urea as a hydrolysis agent. The reaction mechanism and self-assembly process are discussed. After calcinating the as-prepared LDHs at 450 degrees C in nitrogen gas, porous NiO/NiFe2O4 nanosheets were obtained. This work resulted in the development of a simple, cheap, and effective route for the fabrication of large area Ni2+-Fe3+ LDHs as well as porous NiO/NiFe2O4 nanosheets.