Search

By doping a dielectric layer material and improving the device's structure, the electrical characteristics of a memristor can be effectively adjusted, and its application field can be expanded. In this study, graphene quantum dots are embedded in the dielectric layer to improve the performance of a starch-based memristor, and the PMMA layer is introduced into the upper and lower interfaces of the dielectric layer. The experimental results show that the switching current ratio of the Al/starch: GQDs/ITO device was 10 2 times higher than that of the Al/starch/ITO device. However, the switching current ratio of the Al/starch: GQDs/ITO device was further increased, and the set voltage was reduced (-0.75 V) after the introduction of the PMMA layer. The introduction of GQDs and PMMA layers can regulate the formation process of conductive filaments in the device and significantly improve the electrical performance of the memristor.

As artificial synapse devices, memristors have attracted widespread attention in the field of neuromorphic computing. In this paper, Al/polymethyl methacrylate (PMMA)/egg albumen (EA)-graphene quantum dots (GQDs)/PMMA/indium tin oxide (ITO) electrically/optically tunable biomemristors were fabricated using the egg protein as a dielectric layer. The electrons in the GQDs were injected from the quantum dots into the dielectric layer or into the adjacent quantum dots under the excitation of light, and the EA-GQDs dielectric layer formed a pathway composed of GQDs for electronic transmission. The device successfully performed nine brain synaptic functions: excitatory postsynaptic current (EPSC), paired-pulse facilitation (PPF), short-term potentiation (STP), short-term depression (STD), the transition from short-term plasticity to long-term plasticity, spike-timing-dependent plasticity (STDP), spike-rate-dependent plasticity (SRDP), the process of learning, forgetting, and relearning, and Pavlov associative memory under UV light stimulation. The successful simulation of the synaptic behavior of this device provides the possibility for biomaterials to realize neuromorphic computing.

Biomaterials have attracted attention as a major material for biodegradable and transient electronic devices. In this work, biocompatible gelatin-doped graphene quantum dot films are reported as active layer switching memories with good electrical properties and physical transient properties. Such nonvolatile memory devices have write-once-read-many electrical properties and a concentrated distribution of low-resistance and high-resistance states. It provides a solution for the current obstacle of resistive memory storage and computing integration. Based on the sensitivity of the device to ultraviolet light, the "OR gate" logic operation is completed. Furthermore, the active layer can be dissolved in deionized water within 15 min, and the gelatin substrate-based device can be destroyed immediately in water, indicating the potential biodegradation and physical transient properties of our fabricated device. Biocompatible memory devices are environmentally friendly, sustainable for safe storage, and low-cost, making them ideal for storage applications.

In this paper, a floating-gate flexible nonvolatile memory is reported that is composed of natural biological materials, namely, silkworm hemolymph, graphene quantum dots as the floating-gate layer, and polymethyl methacrylate (PMMA) as the insulating layer. The device has a high ON/OFF current ratio (4.76 × 106), a low setting voltage (<−1.75 V), and good durability and retention ability. The device has two storage characteristics, namely, Flash and WORM, which can be effectively and accurately controlled by adjusting the limiting current during device setting. The resistance switching characteristics are the result of the formation and fracture of conductive filaments. The floating-gate flexible bioresistive random access memory prepared in this paper provides a new idea for the development of multifunctional and biocompatible flexible memory.

Physical transient electronics have attracted more attention as the basis for building green electronics and biomedical devices. However, there are difficulties in selecting materials for the fabricated devices to take into account both biodegradability and high performance. In this paper, a physically transient resistive random-access memory (RRAM) device was fabricated by using egg protein and graphene quantum dot composites as active layers. The sandwich structure composed of Al/EA:GQD/ITO shows a good write-once-multiple-read memory characteristic, and the introduced GQD improves the switching current ratio of the device. By using the sensitivity of GQDs to ultraviolet light, the logic operation of the "OR gate" is completed. Furthermore, the device exhibits a physical transient behavior and good biodegradability due to the dissolution behavior in deionized water. These results suggest that the device is a favorable candidate for the construction of memory elements for transient electronic systems.

Organic-resistance random access memory has high application potential in the field of next-generation green nonvolatile memory. Because of their biocompatibility and environmental friendliness, natural biomaterials are suitable for the fabrication of biodegradable and physically transient resistive switching memory devices. A flexible memory device with physically transient properties was fabricated with silver ions and egg albumen composites as active layers, which exhibited characteristics of write-once-read-many-times (WORM), and the incorporation of silver ions improved the ON/OFF current ratio of the device. The device can not only complete the logical operations of "AND gate" and "OR gate", but its active layer film can also be dissolved in deionized water, indicating that it has the characteristics of physical transients. This biocompatible memory device is a strong candidate for a memory element for the construction of transient electronic systems.

In this paper, a tuneable multilevel data storage bioresistive memory device is prepared from a composite of multiwalled carbon nanotubes (MWCNTs) and egg albumen (EA). By changing the concentration of MWCNTs incorporated into the egg albumen film, the switching current ratio of aluminium/egg albumen:multiwalled carbon nanotubes/indium tin oxide (Al/EA:MWCNT/ITO) for resistive random access memory increases as the concentration of MWCNTs decreases. The device can achieve continuous bipolar switching that is repeated 100 times per cell with stable resistance for 10 4 s and a clear storage window under 2.5 × 10 4 continuous pulses. Changing the current limit of the device to obtain low-state resistance values of different states achieves multivalue storage. The mechanism of conduction can be explained by the oxygen vacancies and the smaller number of iron atoms that are working together to form and fracture conductive filaments. The device is nonvolatile and stable for use in rewritable memory due to the adjustable switch ratio, adjustable voltage, and nanometre size, and it can be integrated into circuits with different power consumption requirements. Therefore, it has broad application prospects in the fields of data storage and neural networks.

Nanocarbon materials have the advantages of biocompatibility, thermal stability and chemical stability and have shown excellent electrical properties in electronic devices. In this study, Al/MWCNT:GQD/ITO memristors with rewritable nonvolatile properties were prepared based on composites consisting of multiwalled carbon nanotubes (MWCNTs) and graphene quantum dots (GQDs). The switching current ratio of such a device can be tuned in two ways. Due to the ultraviolet light sensitivity of GQDs, when the dielectric material is illuminated by ultraviolet light, the charge capture ability of the GQDs decreases with an increasing duration of illumination, and the switching current ratio of the device also decreases with an increasing illumination duration (10 3 -10). By exploiting the charge capture characteristics of GQDs, the trap capture level can be increased by increasing the content of GQDs in the dielectric layer. The switching current ratio of the device increases with increasing GQD content (10-10 3 ). The device can be programmed and erased more than 100 times; the programmable switching state can withstand 10 5 read pulses, and the retention time is more than 10 4 s. This memristor has a simple structure, low power consumption, and enormous application potential for data storage, artificial intelligence, image processing, artificial neural networks, and other applications.

In this study, a flexible bioresistive memory with an aluminum/tussah hemolymph/indium tin oxide/polyethylene terephthalate structure is fabricated by using a natural biological material, tussah hemolymph (TH), as the active layer. When different compliance currents (Icc) are applied to the device, it exhibits different resistance characteristics. When 1 mA is applied in the positive voltage range and 100 mA is applied in the negative voltage range, the device exhibits bipolar resistive switching behavior. Additionally, when 1 mA is applied in both the positive- and negative-voltage ranges, the device exhibits write-once-read-many-times (WORM) characteristics. The device has good endurance, with a retention time exceeding 10 4 s. After 10 4 bending cycles, the electrical characteristics remain constant. This memory device can be applied for "AND" and "OR" logic operations in programmable logic circuits. The prepared flexible and transparent biomemristor made of pure natural TH provides a promising new approach for realizing environmentally friendly and biocompatible flexible memory, nerve synapses, and wearable electronic devices.

We used graphene oxide (GO) and egg albumen (EA) to fabricate bipolar resistance switching devices with indium tin oxide (ITO)/GO/EA/GO/Aluminum (Al) and ITO/EA/Al structures. The experimental results show that these ITO/GO/EA/GO/Al and ITO/EA/Al bio-memristors exhibit rewritable flash memory characteristics. Comparisons of ITO/GO/EA/GO/Al devices with 0.05 ωt %, 0.5 ωt %, and 2 ωt % GO in the GO layers and the ITO/EA/Al device show that the ON/OFF current ratio of these devices increases as the GO concentration decreases. Among these devices, the highest switching current ratio is 1.87 × 10 3 . Moreover, the RESET voltage decreases as the GO concentration decreases, which indicates that GO layers with different GO concentrations can be adopted to adjust the ON/OFF current ratio and the RESET voltage. When the GO concentration is 0.5 ωt %, the device can be switched more than 200 times. The retention times of all the devices are longer than 10 4 s.

The incorporation of the one-dimensional carbon nanomaterial carbon nanotubes (CNTs) in poly(methyl methacrylate) (PMMA) was found to successfully develop a resistive switching. It implements memristic characteristics which shift from bistable to tristable memory. The localized current pathways in the organic nanocomposite layers for each intermediate resistive state (IRS) are attributed to the trapping mechanism consistent with the fluorescent measurements. Multi-bit organic memories have attracted considerable interest, which provide an effective way to increase the memory density per unit cell area. This study will be useful for the development and tuning of multi-bit storable organic nanocomposite memory device systems.