Search

This paper aimed to evaluate the biological damages towards diseased cells caused by the use of MgO nanoparticles (NPs). The NPs are produced by a calcination process of a precursor, which is an aqueous suspension of nanostructured Mg(OH) 2 , in turn synthesized following our original, time-energy saving and scalable method able to guarantee short times, high yield of production (up to almost 10 kg/week of NPs), low environmental impact and low energy demand. The MgO NPs, in the form of dry powders, are organized as a network of intercrystallite channels, in turn constituted by monodispersed and roughly spherical NPs < 10 nm, preserving the original pseudo hexagonal-platelet morphology of the precursor. The produced MgO powders are diluted in a PBS solution to obtain different MgO suspension concentrations that are subsequently put in contact, for 3 days, with melanoma and healthy cells. The viable count, made at 24, 48 and 72 h from the beginning of the test, reveals a good cytotoxic activity of the NPs, already at low MgO concentrations. This is particularly marked after 72 h, showing a clear reduction in cellular proliferation in a MgO-concentration-dependent manner. Finally, the results obtained on human skin fibroblasts revealed that the use MgO NPs did not alter at all both the vitality and proliferation of healthy cells.

This paper presents an original and sustainable method for producing ZnO nanoparticles (NPs) in response to global challenges (low energy requirements, low environmental impact, short production times, and high production yield). The method is based on an ion exchange process between an anionic resin and an aqueous ZnCl 2 solution; it operates in one step at room temperature/ambient pressure without the need for complex apparatus or purification steps. From the kinetics, we observed the formation of pure simonkolleite, a zinc-layered hydroxide salt (Zn 5 (OH) 8 Cl 2 ·H 2 O), after only 5 min of reaction. This compound, used elsewhere as a ZnO precursor after calcination at high temperatures, here decomposes at room temperature into ZnO, allowing extraordinary savings of time and energy. Finally, in only 90 min, pure and crystalline ZnO NPs are obtained, with a production yield > 99%. Several types of aggregates resulting from the self-assembly of small hexagonal platelets (solid or hollow in shape) were observed. Using our revolutionary method, we produced almost 10 kg of ZnO NPs per week without any toxic waste, significantly reducing energy consumption; this method allows transferring the use of these unique NPs from the laboratory environment to the real world.

Consolidation of mural paintings in hypogea is challenging because of their severe microclimatic conditions, characterized by high humidity levels, low air circulation, the presence of salts efflorescence, and the detrimental growth of biodeteriogen agents. Traditional consolidant products show significant drawbacks when used in hypogeum. Organic compounds, such as acrylic emulsions, are bio-receptive and some inorganic consolidants, such as silica-based products, show a lack of compatibility with the original substrate, which could lead to a reduction in permeability and an increase in the mechanical resistance of the external layer. The presence of solvents in their formulations, particularly short-chain alcohols that can activate germination of fungal spores, leads to the release of great amounts of volatile organic compounds, which are particularly harmful in the hypogeic environment. To solve these problems, restorers of the Istituto Centrale per il Restauro (ICR) decided to use a new aqueous nanolime dispersion, NANOLAQ, consisting of pure and crystalline Ca(OH) 2 nanoparticles dispersed in water, produced by an innovative and sustainable patented procedure. After laboratory testing, the product has been applied on site, on a medieval mural painting in the Ss. Peter and Paul hypogeum in the UNESCO site of Matera (Italy), monitoring the performance in terms of cohesion of the paint layer and preservation of aesthetic features.

This work introduces an innovative, sustainable, and scalable synthesis of iron oxides nanoparticles (NPs) in aqueous suspension. The method, based on ion exchange process, consists of a one-step procedure, time and energy saving, operating in water and at room temperature, by cheap and renewable reagents. The influence of both oxidation state of the initial reagent and reaction atmosphere is considered. Three kinds of iron nanostructured compounds are obtained (2-lines ferrihydrite; layered-structure iron oxyhydroxide δ-FeOOH; and cubic magnetite), in turn used as precursors to obtain hematite and maghemite NPs. All the produced NPs are characterized by a high purity, small particles dimensions (from 2 to 50 nm), and high specific surface area values up to 420 m 2 /g, with yields of production >90%. In particular, among the most common iron oxide NPs, we obtained cubic magnetite NPs at room temperature, characterized by particle dimensions of about 6 nm and a surface area of 170 m 2 /g. We also obtained hematite NPs at very low temperature conditions (that is 2 h at 200 °C), characterized by particles dimensions of about 5 nm with a surface area value of 200 m 2 /g. The obtained results underline the strength of the synthetic method to provide a new, sustainable, tunable, and scalable high-quality production.

Waterlogged wooden artifacts represent an important historical legacy of our past. They are very fragile, especially due to the severe phenomenon of acidification that may occur in the presence of acid precursors. To date, a satisfactory solution for the deacidification of ancient wood on a large scale has still not been found. In this paper, we propose, for the first time, eco-friendly curative and preventive treatments using nanoparticles (NPs) of earth alkaline hydroxides dispersed in water and produced on a large scale. We present the characterization of the NPs (by X-ray diffraction, atomic-force and electron microscopy, and small-angle neutron scattering), together with the study of the deacidification efficiency of our treatments. We demonstrate that all our treatments are very effective for both curative and preventive aims, able to assure an almost neutral or slightly alkaline pH of the treated woods. Furthermore, the use of water as a solvent paves the way for large-scale and eco-friendly applications which avoid substances that are harmful for the environment and for human health.

This paper introduces an original, eco-friendly and scalable method to synthesize ferrihydrite nanoparticles in aqueous suspensions, which can also be used as a precursor to produce α-hematite nanoparticles. The method, never used before to synthesize iron oxides, is based on an ion exchange process allowing to operate in one-step, with reduced times, at room temperature and ambient pressure, and using cheap or renewable reagents. The influence of reagent concentrations and time of the process on the ferrihydrite features is considered. The transformation to hematite is then analyzed and discussed in relation to different procedures: (1) A natural aging in the water at room temperature; and (2) heat treatments at different temperatures and times. Structural and morphological features of the obtained nanoparticles are investigated by means of several techniques, such as X-ray diffraction, X-ray photoelectron spectroscopy, attenuated total reflectance Fourier transform infrared spectroscopy, transmission and scanning electron microscopy, thermal analysis, nitrogen adsorption and magnetic measurements. Ferrihydrite shows the typical spherical morphology and a very high specific surface area of 420 m 2 /g. Rhombohedral or plate-like hexagonal hematite nanoparticles are obtained by the two procedures, characterized by dimensions of 50 nm and 30 nm, respectively, and a specific surface area up to 57 m 2 /g, which is among the highest values reported in the literature for hematite NPs.