Search

Lithium-sulfur batteries (LSBs), with their high theoretical specific capacity and energy density, have great potential to be a candidate for secondary batteries in the future. However, Li-S batteries suffer from multiple issues and challenges, for example, uneven growth of lithium dendrites, low utilization of the active material (sulfur), and low specific capacity. This paper reports a low-cost and anodic oxidation method to produce niobium pentoxide with a porous structure (P-Nb2O5). A simple one-step process was used to synthesize P-Nb2O5 with porous structures by anodizing niobium at 40 V in fluorinated glycerol. The porous Nb2O5 showed excellent rate capability and good capacity retention by maintaining its structural integrity, allowing us to determine the advantages of its porous structure. As a result of the highly porous structure, the sulfur was not only provided with adequate storage space and abundant adsorption points, but it was also utilized more effectively. The initial discharge capacity with the P-Nb2O5 cathode rose to 1106.8 mAh·g−1 and dropped to 810.7 mAh·g−1 after 100 cycles, which demonstrated the good cycling performance of the battery. This work demonstrated that the P-Nb2O5 prepared by the oxidation method has strong adsorption properties and good chemical affinity.

The advantages of high energy density and low cost make lithium–sulfur batteries one of the most promising candidates for next-generation energy storage systems. However, the electrical insulativity of sulfur and the serious shuttle effect of lithium polysulfides (LiPSs) still impedes its further development. In this regard, a uniform hollow mesoporous Ni(OH)2@CNT microsphere was developed to address these issues. The SEM images show the Ni(OH)2 delivers an average size of about 5 μm, which is composed of nanosheets. The designed Ni(OH)2@CNT contains transition metal cations and interlayer anions, featuring the unique 3D spheroidal flower structure, decent porosity, and large surface area, which is highly conducive to conversion systems and electrochemical energy storage. As a result, the as-fabricated Li-S battery delivers the reversible capacity of 652 mAh g−1 after 400 cycles, demonstrating excellent capacity retention with a low average capacity loss of only 0.081% per cycle at 1 C. This work has shown that the Ni(OH)2@CNT sulfur host prepared by hydrothermal embraces delivers strong physical absorption as well as chemical affinity.

A three-dimensionally ordered macroporous ZnO (3DOM ZnO) framework was synthesized by a template method to serve as a sulfur host for lithium–sulfur batteries. The unique 3DOM structure along with an increased active surface area promotes faster and better electrolyte penetration accelerating ion/mass transfer. Moreover, ZnO as a polar metal oxide has a strong adsorption capacity for polysulfides, which makes the 3DOM ZnO framework an ideal immobilization agent and catalyst to inhibit the polysulfides shuttle effect and promote the redox reactions kinetics. As a result of the stated advantages, the S/3DOM ZnO composite delivered a high initial capacity of 1110 mAh g−1 and maintained a capacity of 991 mAh g−1 after 100 cycles at 0.2 C as a cathode in a lithium–sulfur battery. Even at a high C-rate of 3 C, the S/3DOM ZnO composite still provided a high capacity of 651 mAh g−1, as well as a high areal capacity (4.47 mAh cm−2) under high loading (5 mg cm−2).

In this work, black phosphorus quantum dots (BPQDs) were decorated on hexagonal ZnIn2S4 flower-like microspheres to form zero-dimensional/two-dimensional (0D/2D) structures. Interface interactions between the BPQDs and ZnIn2S4 resulted in optimum effective charge transfer, thereby improving the photocatalytic performance of the material. Thus, the 0.2% BPQD−ZnIn2S4 sample showed 30% higher H2 evolution rates compared to pure ZnIn2S4. This study provides a simple route for the synthesis of photocatalysts. The results obtained herein can pave the way for designing effective catalysts for solar-to-chemical energy conversion and feasible approaches to obtain cheap, clean, and efficient photocatalysts.

Herein, we demonstrate the fabrication of a three-dimensional (3D) polypyrrole-coated-porous graphene (PPy/PG) composite through in-situ polymerization of pyrrole monomer on PG surface. The PPy/PG displays a 3D hierarchical porous structure and the resulting PPy/PG hybrid serves as a conductive trap to lithium polysulfides enhancing the electrochemical performances. Owing to the superior conductivity and peculiar structure, a high initial discharge capacity of 1020 mAh g−1 and the reversible capacity of 802 mAh g−1 over 200 cycles are obtained for the S/PPy/PG cathode at 0.1 C, remaining the remarkable cyclic stability. In addition, the S/PPy/PG cathodes demonstrate an excellent rate performance exhibiting 477 mAh g−1 at 2 C.

An efficient, industry-accepted spray drying method was used to synthesize micro-spherical sulfur/graphene oxide (S/GO) composites as cathode materials within lithium sulfur batteries. The as-designed wrapping of the sulfur-nanoparticles, with wrinkled GO composites, was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The unique morphological design of this material enabled superior discharge capacity and cycling performance, demonstrating a high initial discharge capacity of 1400 mAh g−1 at 0.1 C. The discharge capacity remained at 828 mAh g−1 after 150 cycles. The superior electrochemical performance indicates that the S/GO composite improves electrical conductivity and alleviates the shuttle effect. This study represents the first time such a facile spray drying method has been adopted for lithium sulfur batteries and used in the fabrication of S/GO composites.

A simple and effective method was developed to obtain the electrode for lithium/sulfur (Li/S) batteries with high specific capacity and cycling durability via adopting an interconnected sulfur/activated carbon/graphene (reduced graphene oxide) aerogel (S/AC/GA) cathode architecture. The AC/GA composite with a well-defined interconnected conductive network was prepared by a reduction-induced self-assembly process, which allows for obtaining compact and porous structures. During this process, reduced graphene oxide (RGO) was formed, and due to the presence of oxygen-containing functional groups on its surface, it not only improves the electronic conductivity of the cathode but also effectively inhibits the polysulfides dissolution and shuttle. The introduced activated carbon allowed for lateral and vertical connection between individual graphene sheets, completing the formation of a stable three-dimensionally (3D) interconnected graphene framework. Moreover, a high specific surface area and 3D interconnected porous structure efficiently hosts a higher amount of active sulfur material, about 65 wt %. The designed S/AC/GA composite electrodes deliver an initial capacity of 1159 mAh g−1 at 0.1 C and can retain a capacity of 765 mAh g−1 after 100 cycles in potential range from 1 V to 3 V.

In this work, a facile strategy to synthesize oxygen and nitrogen co-doped porous carbon (ONPC) is reported by one-step pyrolysis of waste coffee grounds. As-prepared ONPC possesses highly rich micro/mesopores as well as abundant oxygen and nitrogen co-doping, which is applied to sulfur hosts as lithium/sulfur batteries’ appropriate cathodes. In battery testing, the sulfur/oxygen and nitrogen co-doped porous carbon (S/ONPC) composite materials reveal a high initial capacity of 1150 mAh·g−1 as well as a reversible capacity of 613 mAh·g−1 after the 100th cycle at 0.2 C. Furthermore, when current density increases to 1 C, a discharge capacity of 331 mAh·g−1 is still attainable. Due to the hierarchical porous framework and oxygen/nitrogen co-doping, the S/ONPC composite exhibits a high utilization of sulfur and good electrochemical performance via the immobilization of the polysulfides through strong chemical binding.

The synthesis of highly porous carbon (HPC) materials from poplar catkin by KOH chemical activation and hydrothermal carbonization as a conductive additive to a lithium-sulfur cathode is reported. Elemental sulfur was composited with as-prepared HPC through a melt diffusion method to form a S/HPC nanocomposite. Structure and morphology characterization revealed a hierarchically sponge-like structure of HPC with high pore volume (0.62 cm3∙g−1) and large specific surface area (1261.7 m2∙g−1). When tested in Li/S batteries, the resulting compound demonstrated excellent cycling stability, delivering a second-specific capacity of 1154 mAh∙g−1 as well as presenting 74% retention of value after 100 cycles at 0.1 C. Therefore, the porous structure of HPC plays an important role in enhancing electrochemical properties, which provides conditions for effective charge transfer and effective trapping of soluble polysulfide intermediates, and remarkably improves the electrochemical performance of S/HPC composite cathodes.

An aqueous sodium ion battery (ASIB) with metal Zn as anode and Na4Mn9O18-reduced graphene oxide (Na4Mn9O18-RGO) as cathode has been developed. In this work, spherical Na4Mn9O18-RGO composite particles were prepared via spray drying. The aqueous battery exhibits stable cyclability and high specific capacities. Typically, a high initial discharge capacity of 61.7 mAh·g−1 is attained at a high current rate of 4 C, and a stabilizing reversible capacity of 58.9 mAh·g−1 was obtained after 150 cycles. The network interlaced by RGO sheets provided fast electron conduction paths and structural stability to accommodate the mechanical stresses induced by sodium insertion and extraction, so the Na4Mn9O18-RGO electrode displayed superior electrochemical performance in the ASIB.