Search

Vibration measurement and analysis play an important role in diagnosing mechanical faults, but existing vibration sensors are limited by issues such as dependence on external power sources and high costs. To overcome these challenges, the use of triboelectric nanogenerator (TENG)−based vibration sensors has recently attracted attention. These vibration sensors measure a small range of vibration frequencies and are not suitable for measuring high-frequency vibrations. Herein, a self-powered vibration sensor based on an elastic steel triboelectric nanogenerator (ES−TENG) is proposed. By optimizing the elastic steel sheet structure and combining time-frequency transformation and filtering processing methods, the measurement of medium- and high-frequency vibrations is achieved. These results demonstrate that the ES−TENG can perform vibration measurements in the range of 2–10,000 Hz, with a small average error (~0.42%) between the measured frequency and external vibration frequency values. Therefore, the ES−TENG can be used as a self-powered, highly-accurate vibration sensor for intelligent machinery monitoring.

Harvesting wind energy from the ambient environment is a feasible method for powering wireless sensors and wireless transmission equipment. Triboelectric nanogenerators (TENGs) have proven to be a stable and promising technology for harvesting ambient wind energy. This study explores a new method for the performance enhancement and practical application of TENGs. An array of flag-type triboelectric nanogenerators (F-TENGs) for harvesting wind energy is proposed. An F-TENG consists of one piece of polytetrafluoroethylene (PTFE) membrane, which has two carbon-coated polyethylene terephthalate (PET) membranes on either side with their edges sealed. The PTFE was pre-ground to increase the initial charge on the surface and to enhance the effective contact area by improving the surface roughness, thus achieving a significant improvement in the output performance. The vertical and horizontal arrays of F-TENGs significantly improved the power output performance. The optimal power output performance was achieved when the vertical parallel distance was approximately 4D/15 (see the main text for the meaning of D), and the horizontal parallel distance was approximately 2D. We found that the peak output voltage and current of a single flag-type TENG of constant size were increased by 255% and 344%, respectively, reaching values of 64 V and 8 μA, respectively.