Search

Highlights: High-quality large-area perovskite films are prepared using a solid–liquid two-step film formation method combined with CsBr modification for the buried interface and Urea additive for perovskite crystallization. The inverted perovskite solar modules' performance is enhanced to 20.56% in 61.56 cm2 with improved stability. A considerable efficiency gap exists between large-area perovskite solar modules and small-area perovskite solar cells. The control of forming uniform and large-area film and perovskite crystallization is still the main obstacle restricting the efficiency of PSMs. In this work, we adopted a solid–liquid two-step film formation technique, which involved the evaporation of a lead iodide film and blade coating of an organic ammonium halide solution to prepare perovskite films. This method possesses the advantages of integrating vapor deposition and solution methods, which could apply to substrates with different roughness and avoid using toxic solvents to achieve a more uniform, large-area perovskite film. Furthermore, modification of the NiOx/perovskite buried interface and introduction of Urea additives were utilized to reduce interface recombination and regulate perovskite crystallization. As a result, a large-area perovskite film possessing larger grains, fewer pinholes, and reduced defects could be achieved. The inverted PSM with an active area of 61.56 cm2 (10 × 10 cm2 substrate) achieved a champion power conversion efficiency of 20.56% and significantly improved stability. This method suggests an innovative approach to resolving the uniformity issue associated with large-area film fabrication. [ABSTRACT FROM AUTHOR]

Highlights: A novel aqueous/aprotic electrolyte with low salt concentration (i.e., 0.5 m Zn(CF3SO3)2+1 m LiTFSI) demonstrated an expanded electrochemical window, which can simultaneously stabilize Zn metal anode and increase the operation voltage of Zn-ion hybrid supercapacitors. The coordination shell of the electrolyte induced by acetonitrile and LiTFSI can not only suppress the Zn corrosion and hydrogen evolution reaction but also promote the cathodic stability and ion migration, which is depicted by the density functional theory simulations together with experimental characterizations. The Zn-ion hybrid supercapacitor based on the developed electrolyte can operate within 0–2.2 V in a wide temperature range with an ultra-long lifespan (> 120,000 cycles). With the merits of the high energy density of batteries and power density of supercapacitors, the aqueous Zn-ion hybrid supercapacitors emerge as a promising candidate for applications where both rapid energy delivery and moderate energy storage are required. However, the narrow electrochemical window of aqueous electrolytes induces severe side reactions on the Zn metal anode and shortens its lifespan. It also limits the operation voltage and energy density of the Zn-ion hybrid supercapacitors. Using 'water in salt' electrolytes can effectively broaden their electrochemical windows, but this is at the expense of high cost, low ionic conductivity, and narrow temperature compatibility, compromising the electrochemical performance of the Zn-ion hybrid supercapacitors. Thus, designing a new electrolyte to balance these factors towards high-performance Zn-ion hybrid supercapacitors is urgent and necessary. We developed a dilute water/acetonitrile electrolyte (0.5 m Zn(CF3SO3)2 + 1 m LiTFSI-H2O/AN) for Zn-ion hybrid supercapacitors, which simultaneously exhibited expanded electrochemical window, decent ionic conductivity, and broad temperature compatibility. In this electrolyte, the hydration shells and hydrogen bonds are significantly modulated by the acetonitrile and TFSI− anions. As a result, a Zn-ion hybrid supercapacitor with such an electrolyte demonstrates a high operating voltage up to 2.2 V and long lifespan beyond 120,000 cycles. [ABSTRACT FROM AUTHOR]