Search

Vibration is an omnipresent energy source that is renewable and has the potential to cause damage to transmission lines. Harvesting harmful vibration energy can achieve vibration attenuation. Here, a vibration-driven triboelectric nanogenerator (V-TENG) with the potential for vibration attenuation is proposed as a power source for monitoring the operating condition of transmission lines. The V-TENG with structural optimization and frequency response range improvement is first discussed, indicating that it has a simple structural design with a good output performance. Then an energy management circuit is used to improve the charging efficiency of large capacitors. The vibration attenuation effect and wireless transmission system are verified in the simulation environment, benefiting from the well-designed structure and outstanding electric performance. This work demonstrates an efficient strategy for harvesting vibration energy through the TENG, which provides valuable guidance for further construction of online monitoring of transmission lines.

Perovskite and semiconductor materials are always the focus of research because of their excellent properties, including pyroelectric, photovoltaic effects, and high light absorption. On basis of this, the design of combining BaTiO3 (BTO) thin films with a GaN layer to form a heterojunction structure with a pyro-phototronic effect has achieved an efficient self-powered BTO/GaN ultraviolet photodetector (PD) with high responsivity and a fast response speed. With cooling and prepolarization treatments, the photocurrent peak and plateau have been enhanced by up to 1348 and 1052%, and the response time of the pyroelectric and common photoelectric current are improved from 0.35 to 0.16 s and from 3.27 to 2.35 s with a bias applied, respectively. The self-powered BTO/GaN PD combined with a pyro-phototronic effect provides a new idea and optimization for realizing ultrafast ultraviolet sensing at room temperature, making it a promising candidate in environmentally friendly and economical ultraviolet optoelectronic devices.

Tribovoltaic direct-current (DC) nanogenerator made of dynamic semiconductor heterojunction is emerging as a promising mechanical energy harvesting technology. However, fundamental understanding of the mechano-electronic carrier excitation and transport at dynamic semiconductor interfaces remains to be investigated. Here, we demonstrated for the first time, that tribovoltaic DC effect can be tuned with metal

A stretchable triboelectric nanogenerator (TENG) can be a promising solution for the power supply of various flexible electronics. However, the detailed electrification mechanism of elastic triboelectric materials still needs to be clarified. In this work, we found crystallization behavior induced by strain and low temperature can lead to a shift in a triboelectric series for commonly used triboelectric elastomers and even reverse the triboelectric polarity. This effect is attributed to the notable rearrangement of surface electron cloud density happening along with the crystallization process of the molecular chain. This effect is significant with natural rubber, and silicone rubber can experience this effect at low temperature, which also leads to a shift in a triboelectric series, and an applied strain at low temperature can further enhance this shift. This study demonstrated that the electrification polarity of triboelectric materials should be re-evaluated under different strains and different temperatures, which provides a mechanism distinct from the general understanding of elastic triboelectric materials.

Piezo-phototronic effect is a fundamental effect of semiconductors lacking of central symmetry with geometries from one-dimensional (1D) nanowire to 3D bulk. Here, we present that the piezo-phototr...

Tactile information is efficiently captured and processed through a complex sensory system combined with mechanoreceptors, neurons, and synapses in human skin. Synapses are essential for tactile signal transmission between pre/post-neurons. However, developing an electronic device that integrates the functions of tactile information sensation and transmission remains a challenge. Here, we present a piezotronic synapse based on a single GaN microwire that can simultaneously achieve the capabilities of strain sensing and synaptic functions. The piezotronic effect in the wurtzite GaN is introduced to strengthen synaptic weight updates (e.g., 330% enhancement at a compressive stress of -0.36%) with pulse trains. A high gauge factor for strain sensing (ranging from 0 to -0.81%) of about 736 is also obtained. Remarkably, the piezotronic synapse enables the neuromorphic hardware achievement of the perception and processing of tactile information in a single micro/nanowire system, demonstrating an advance in biorealistic artificial intelligence systems.

Triboelectric nanogenerators (TENGs) have attracted much interest in recent years, due to its effectiveness and low cost for converting high-entropy mechanical energy into electric power. The traditional TENGs generate an alternating current, which requires a rectifier to provide a direct-current (DC) power supply. Herein, a dynamic p-n junction based direct-current triboelectric nanogenerator (DTENG) is demonstrated. When a p-Si wafer is sliding on a n-GaN wafer, carriers are generated at the interface and a DC current is produced along the direction of the built-in electric field, which is called the tribovoltatic effect. Simultaneously, an UV light is illuminated on the p-n junction to enhance the output. The results indicate that the current increases 13 times and the voltage increases 4 times under UV light (365 nm, 28 mW/cm2) irradiation. This work demonstrates the coupling between the tribovoltaic effect and the photovoltaic effect in DTENG semiconductors, promoting further development for energy harvesting in mechanical energy and photon energy.

Perovskite and semiconductor materials are always the focus of research because of their excellent properties, including pyroelectric, photovoltaic effects, and high light absorption. On basis of this, the design of combining BaTiO

Harvesting distributed and low-quality mechanical energies by triboelectric nanogenerators to power electrochemical reactions is beneficial to electric energy saving and certain applications. However, the conventional self-powered electrochemical process is awkward about the reaction rate, energy conversion efficiency, high-operation frequency, and mismatched impedance. Here we demonstrate an advanced self-powered electrochemical system. In comparison with the conventional system that is inert in activity, the superior power management and electrochemical reaction regulation in tandem make the novel system outstanding for hydrogen peroxide production. In addition to the visible product, an internal current efficiency of 24.6% in the system was achieved. The developed system provides an optimization strategy toward electric energy saving for electrochemical reactions as well as enabling their applications in remote areas by converting environmental mechanical vibrational energy for ecological improvement or recyclable chemical fuel generation.

As a new generation of light sources, GaN-based light-emitting diodes (LEDs) have wide applications in lighting and display. Heat dissipation in LEDs is a fundamental issue that leads to a decrease in light output, a shortened lifespan, and the risk of catastrophic failure. Here, the temperature spatial distribution of the LEDs is revealed by using high-resolution infrared thermography, and the piezo-phototronic effect is proved to restrain efficaciously the temperature increment for the first time. We observe the temperature field and current density distribution of the LED array under external strain compensation. Specifically, the temperature rise caused by the self-heating effect is reduced by 47.62% under 0.1% external strain, which is attributed to the enhanced competitiveness of radiative recombination against nonradiative recombination due to the piezo-phototronic effect. This work not only deepens the understanding of the piezo-phototronic effect in LEDs but also provides a novel, easy-to-implement, and economical method to effectively enhance thermal management.

Piezo-phototronic effect is a fundamental effect of semiconductors lacking of central symmetry with geometries from one-dimensional (1D) nanowire to 3D bulk. Here, we present that the piezo-phototronic effect can even tune a spin-orbit coupled photoluminescence (PL) based on all-inorganic perovskite CsPbBr

Achievement of p–n homojuncted GaN enables the birth of III-nitride light emitters. Owing to the wurtzite-structure of GaN, piezoelectric polarization charges present at the interface can effectively control/tune the optoelectric behaviors of local charge-carriers (i.e., the piezo-phototronic effect). Here, we demonstrate the significantly enhanced light-output efficiency and suppressed efficiency droop in GaN microwire (MW)-based p–n junction ultraviolet light-emitting diode (UV LED) by the piezo-phototronic effect. By applying a −0.12% static compressive strain perpendicular to the p–n junction interface, the relative external quantum efficiency of the LED is enhanced by over 600%. Furthermore, efficiency droop is markedly reduced from 46.6% to 7.5% and corresponding droop onset current density shifts from 10 to 26.7 A cm–2. Enhanced electrons confinement and improved holes injection efficiency by the piezo-phototronic effect are revealed and theoretically confirmed as the physical mechanisms. This stud...

Operation time of implantable electronic devices is largely constrained by the lifetime of batteries, which have to be replaced periodically by surgical procedures once exhausted, causing physical and mental suffering to patients and increasing healthcare costs. Besides the efficient scavenging of the mechanical energy of internal organs, this study proposes a self-powered, flexible, and one-stop implantable triboelectric active sensor (iTEAS) that can provide continuous monitoring of multiple physiological and pathological signs. As demonstrated in human-scale animals, the device can monitor heart rates, reaching an accuracy of ∼99%. Cardiac arrhythmias such as atrial fibrillation and ventricular premature contraction can be detected in real-time. Furthermore, a novel method of monitoring respiratory rates and phases is established by analyzing variations of the output peaks of the iTEAS. Blood pressure can be independently estimated and the velocity of blood flow calculated with the aid of a separate arterial pressure catheter. With the core-shell packaging strategy, monitoring functionality remains excellent during 72 h after closure of the chest. The in vivo biocompatibility of the device is examined after 2 weeks of implantation, proving suitability for practical use. As a multifunctional biomedical monitor that is exempt from needing an external power supply, the proposed iTEAS holds great potential in the future of the healthcare industry.

An integrated self-charging power unit, combining a hybrid silicon nanowire/polymer heterojunction solar cell with a polypyrrole-based supercapacitor, has been demonstrated to simultaneously harvest solar energy and store it. By efficiency enhancement of the hybrid nanowire solar cells and a dual-functional titanium film serving as conjunct electrode of the solar cell and supercapacitor, the integrated system is able to yield a total photoelectric conversion to storage efficiency of 10.5%, which is the record value in all the integrated solar energy conversion and storage system. This system may not only serve as a buffer that diminishes the solar power fluctuations from light intensity, but also pave its way toward cost-effective high efficiency self-charging power unit. Finally, an integrated device based on ultrathin Si substrate is demonstrated to expand its feasibility and potential application in flexible energy conversion and storage devices.

Emerging applications in wearable technology, pervasive computing, human-machine interfacing, and implantable biomedical devices demand an appropriate power source that can sustainably operate for extended periods of time with minimal intervention (Wang, Z. L.; et al. Angew. Chem., Int. Ed. 2012, 51, 11700). Self-powered nanosystems, which harvest operating energy from its host (i.e., the human body), may be feasible due to their extremely low power consumption (Tian, B. Z.; et al. Nature 2007, 449, 885. Javey, A.; et al. Nature 2003, 424, 654. Cui, Y.; et al. Science 2001, 291, 851). Here we report materials and designs for wearable-on-skin piezoelectric devices based on ultrathin (2 μm) solution-derived ZnO p-n homojunction films for the first time. The depletion region formed at the p-n homojunction effectively reduces internal screening of strain-induced polarization charges by free carriers in both n-ZnO and Sb-doped p-ZnO, resulting in significantly enhanced piezoelectric output compared to a single layer device. The p-n structure can be further grown on polymeric substrates conformable to a human wrist and used to convert movement of the flexor tendons into distinguishable electrical signals for gesture recognition. The ZnO homojunction piezoelectric devices may have applications in powering nanodevices, bioprobes, and self-powered human-machine interfacing.

Contact electrification is about the charge transfer between the surfaces of two materials in a contact-separation process. This effect has been widely utilized in particle separation and energy harvesting, where the charge transfer is preferred to be maximized. However, this effect is always undesirable in some areas such as electronic circuit systems due to the damage from the accumulated electrostatic charges. Herein, we introduced an approach to purposely manipulate the contact electrification process both in polarity and magnitude of the charge transfer through an applied electric field between two materials. Theoretical modeling and the corresponding experiments for controlling the charge transfer between a Pt coated atomic force microscopy tip and Parylene film have been demonstrated. The modulation effect of the electric field on contact electrification is enhanced for a thinner dielectric layer. This work can potentially be utilized to enhance the output performance of energy harvesting devices or nullify contact electric charge transfer in applications where this effect is undesirable.

A low-cost high-performance solid-state flexible asymmetric supercapacitor (ASC) with α-MnO2 nanowires and amorphous Fe2O3 nanotubes grown on flexible carbon fabric is first designed and fabricated. The assembled novel flexible ASC device with an extended operating voltage window of 1.6 V exhibits excellent performance such as a high energy density of 0.55 mWh/cm(3) and good rate capability. The ASC devices can find numerous applications as effective power sources, such as powering color-switchable sun glasses and smart windows.

We introduce an innovative design of a disk triboelectric nanogenerator (TENG) with segmental structures for harvesting rotational mechanical energy. Based on a cyclic in-plane charge separation between the segments that have distinct triboelectric polarities, the disk TENG generates electricity with unique characteristics, which have been studied by conjunction of experimental results with finite element calculations. The role played by the segmentation number is studied for maximizing output. A distinct relationship between the rotation speed and the electrical output has been thoroughly investigated, which not only shows power enhancement at high speed but also illuminates its potential application as a self-powered angular speed sensor. Owing to the nonintermittent and ultrafast rotation-induced charge transfer, the disk TENG has been demonstrated as an efficient power source for instantaneously or even continuously driving electronic devices and/or charging an energy storage unit. This work presents a novel working mode of TENGs and opens up many potential applications of nanogenerators for harvesting even large-scale energy.

By combining contact-mode atomic force microscopy (AFM) and scanning Kevin probe microscopy (SKPM), we demonstrated an in situ method for quantitative characterization of the triboelectrification process at the nanoscale. We systematically characterized the triboelectric charge distribution, multifriction effect on charge transfer, as well as subsequent charge diffusion on the dielectric surface: (i) the SiO2 surface can be either positively or negatively charged through triboelectric process using Si-based AFM probes with and without Pt coating, respectively; (ii) the triboelectric charges accumulated from multifriction and eventually reached to saturated concentrations of (-150 ± 8) μC/m(2) and (105 ± 6) μC/m(2), respectively; (iii) the charge diffusion coefficients on SiO2 surface were measured to be (1.10 ± 0.03) × 10(-15) m(2)/s for the positive charge and (0.19 ± 0.01) × 10(-15) m(2)/s for the negative charges. These quantifications will facilitate a fundamental understanding about the triboelectric and de-electrification process, which is important for designing high performance triboelectric nanogenerators. In addition, we demonstrated a technique for nanopatterning of surface charges without assistance of external electric field, which has a promising potential application for directed self-assembly of charged nanostructures for nanoelectronic devices.

On the basis of a vertically aligned ultralong Pb(Zr(0.52)Ti(0.48))O(3) (PZT) nanowire array fabricated using electrospinning nanofibers, we developed a new type of integrated nanogenerator (NG) with ultrahigh output voltage of 209 V and current density of 23.5 μA/cm(2), which are 3.6 times and 2.9 times of the previous record values, respectively. The output electricity can be directly used to stimulate the frog's sciatic nerve and to induce a contraction of a frog's gastrocnemius. The NG can instantaneously power a commercial light-emitting diode (LED) without the energy storage process.

Harvesting energy from our living environment is an effective approach for sustainable, maintenance-free, and green power source for wireless, portable, or implanted electronics. Mechanical energy scavenging based on triboelectric effect has been proven to be simple, cost-effective, and robust. However, its output is still insufficient for sustainably driving electronic devices/systems. Here, we demonstrated a rationally designed arch-shaped triboelectric nanogenerator (TENG) by utilizing the contact electrification between a polymer thin film and a metal thin foil. The working mechanism of the TENG was studied by finite element simulation. The output voltage, current density, and energy volume density reached 230 V, 15.5 μA/cm(2), and 128 mW/cm(3), respectively, and an energy conversion efficiency as high as 10-39% has been demonstrated. The TENG was systematically studied and demonstrated as a sustainable power source that can not only drive instantaneous operation of light-emitting diodes (LEDs) but also charge a lithium ion battery as a regulated power module for powering a wireless sensor system and a commercial cell phone, which is the first demonstration of the nanogenerator for driving personal mobile electronics, opening the chapter of impacting general people's life by nanogenerators.

We demonstrate a pyroelectric nanogenerator (PENG) based on a lead zirconate titanate (PZT) film, which has a pyroelectric coefficient of about −80 nC/cm 2 K. For a temperature change of 45 K at a rate of 0.2 K/s, the output open-circuit voltage and short-circuit current density of the PENG reached 22 V and 171 nA/cm 2 , respectively, corresponding to a maximum power density of 0.215 mW/ cm 3 . A detailed theory was developed for understanding the high output voltage of PENG. A single electrical output pulse can directly drive a liquid crystal display (LCD) for longer than 60 s. A Li-ion battery was charged by the PENG at different working frequencies, which was used to drive a green light- emitting diode (LED). The demonstrated PENG shows potential applications in wireless sensors.

Nanowire solar cells are promising candidates for powering nanosystems and flexible electronics. The strain in the nanowires, introduced during growth, device fabrication and/or application, is an important issue for piezoelectric semiconductor (like CdS, ZnO, and CdTe) based photovoltaic. In this work, we demonstrate the first largely enhanced performance of n-CdS/p-Cu2S coaxial nanowire photovoltaic (PV) devices using the piezo-phototronics effect when the PV device is subjected to an external strain. Piezo-phototronics effect could control the electron–hole pair generation, transport, separation, and/or recombination, thus enhanced the performance of the PV devices by as high as 70%. This effect offers a new concept for improving solar energy conversation efficiency by designing the orientation of the nanowires and the strain to be purposely introduced in the packaging of the solar cells. This study shed light on the enhanced flexible solar cells for applications in self-powered technology, environment...

Harvesting thermoelectric energy mainly relies on the Seebeck effect that utilizes a temperature difference between two ends of the device for driving the diffusion of charge carriers. However, in an environment that the temperature is spatially uniform without a gradient, the pyroelectric effect has to be the choice, which is based on the spontaneous polarization in certain anisotropic solids due to a time-dependent temperature variation. Using this effect, we experimentally demonstrate the first application of pyroelectric ZnO nanowire arrays for converting heat energy into electricity. The coupling of the pyroelectric and semiconducting properties in ZnO creates a polarization electric field and charge separation along the ZnO nanowire as a result of the time-dependent change in temperature. The fabricated nanogenerator has a good stability, and the characteristic coefficient of heat flow conversion into electricity is estimated to be ∼0.05-0.08 Vm(2)/W. Our study has the potential of using pyroelectric nanowires to convert wasted energy into electricity for powering nanodevices.

Enhancing the output power of a nanogenerator is essential in applications as a sustainable power source for wireless sensors and microelectronics. We report here a novel approach that greatly enhances piezoelectric power generation by introducing a p-type polymer layer on a piezoelectric semiconducting thin film. Holes at the film surface greatly reduce the piezoelectric potential screening effect caused by free electrons in a piezoelectric semiconducting material. Furthermore, additional carriers from a conducting polymer and a shift in the Fermi level help in increasing the power output. Poly(3-hexylthiophene) (P3HT) was used as a p-type polymer on piezoelectric semiconducting zinc oxide (ZnO) thin film, and phenyl-C(61)-butyric acid methyl ester (PCBM) was added to P3HT to improve carrier transport. The ZnO/P3HT:PCBM-assembled piezoelectric power generator demonstrated 18-fold enhancement in the output voltage and tripled the current, relative to a power generator with ZnO only at a strain of 0.068%. The overall output power density exceeded 0.88 W/cm(3), and the average power conversion efficiency was up to 18%. This high power generation enabled red, green, and blue light-emitting diodes to turn on after only tens of times bending the generator. This approach offers a breakthrough in realizing a high-performance flexible piezoelectric energy harvester for self-powered electronics.

We report a systematic study about the anisotropic third-order optical nonlinearity of a single ZnO micro/nanowire by using the Z-scan method with a femtosecond laser. The two-photon absorption coefficient and nonlinear refraction index, which are measured as a function of polarization angle and sample orientation angle, exhibit oscillation curves with a period of π/2, indicating a highly polarized optical nonlinearity of the ZnO micro/nanowire. Further studies show that the polarized optical nonlinearity of the ZnO micro/nanowire is highly size-dependent. The results indicate that ZnO nanowire has great potential in applications of nanolasers, all-optical switching and polarization-sensitive photodetectors.

It is known that bulk ZnO is a nonmagnetic material. However, the electronic band structure of ZnO is severely distorted when the ZnO is in the shape of a very thin plate with its dimension along the c-axis reduced to a few nanometers while keeping the bulk scale sizes in the other two dimensions. We found that the chemically synthesized ZnO nanoplates exhibit magnetism even at room temperature. First-principles calculations show a growing asymmetry in the spin distribution within the distorted bands formed from Zn (3d) and O (2p) orbitals with the reduction of thickness of the ZnO nanoplates, which is suggested to be responsible for the observed magnetism. In contrast, reducing the dimension along the a- or b-axes of a ZnO crystal does not yield any magnetism for ZnO nanowires that grow along c-axis, suggesting that the internal electric field produced by the large {0001} polar surfaces of the nanoplates may be responsible for the distorted electronic band structures of thin ZnO nanoplates.

We present a high-capacity pseudocapacitor based on a hierarchical network architecture consisting of Co(3)O(4) nanowire network (nanonet) coated on a carbon fiber paper. With this tailored architecture, the electrode shows ideal capacitive behavior (rectangular shape of cyclic voltammograms) and large specific capacitance (1124 F/g) at high charge/discharge rate (25.34 A/g), still retaining ~94% of the capacitance at a much lower rate of 0.25 A/g. The much-improved capacity, rate capability, and cycling stability may be attributed to the unique hierarchical network structures, which improves electron/ion transport, enhances the kinetics of redox reactions, and facilitates facile stress relaxation during cycling.

Plasmonic waveguides made of metal nanowires (NWs) possess significant potential for applications in integrated photonic and electronic devices. Energy loss induced by bending of a NW during light propagation is critical in affecting its performance as a plasmonic waveguide. We report the characterization of the pure bending loss in curved crystalline silver NW plasmonic waveguides by decoupling the energy loss caused by bending and propagation. The energy attenuation coefficiency due purely to bending was also determined, which exhibited an exponential relationship with the bending radius. Finite-difference-time-domain (FDTD) methods were utilized for theoretical simulations, which matched the experimental results well.

The piezoelectric generation of perovskite BaTiO3 thin films on a flexible substrate has been applied to convert mechanical energy to electrical energy for the first time. Ferroelectric BaTiO3 thin films were deposited by radio frequency magnetron sputtering on a Pt/Ti/SiO2/(100) Si substrate and poled under an electric field of 100 kV/cm. The metal-insulator (BaTiO3)-metal-structured ribbons were successfully transferred onto a flexible substrate and connected by interdigitated electrodes. When periodically deformed by a bending stage, a flexible BaTiO3 nanogenerator can generate an output voltage of up to 1.0 V. The fabricated nanogenerator produced an output current density of 0.19 μA/cm(2) and a power density of ∼7 mW/cm(3). The results show that a nanogenerator can be used to power flexible displays by means of mechanical agitations for future touchable display technologies.

We present a simple, cost-effective, robust, and scalable approach for fabricating a nanogenerator that gives an output power strong enough to continuously drive a commercial liquid crystal display. Utilizing the conical shape of the as-grown ZnO nanowires, a nanogenerator is fabricated by simply dispersing them onto a flat polymer film to form a rational "composite" structure. It is suggested that the geometry induced unipolar assembly of the conical nanowires in such a composite structure results in a macroscopic piezoelectric potential across its thickness by introducing a mechanical deformation, which may be responsible for driving the flow of the inductive charges between the top and bottom electrodes. A compressive strain of 0.11% at a straining rate of 3.67% s(-1) produces an output voltage up to 2 V (equivalent open circuit voltage of 3.3 V). This is a practical and versatile technology with the potential for powering small size personal electronics.

We report the first piezoelectric potential gated hybrid field-effect transistors based on nanotubes and nanowires. The device consists of single-walled carbon nanotubes (SWNTs) on the bottom and crossed ZnO piezoelectric fine wire (PFW) on the top with an insulating layer between. Here, SWNTs serve as a carrier transport channel, and a single-crystal ZnO PFW acts as the power- free, contact-free gate or even an energy-harvesting component later on. The piezopotential created by an external force in the ZnO PFW is demonstrated to control the charge transport in the SWNT channel located underneath. The magnitude of the piezopotential in the PFW at a tensile strain of 0.05% is measured to be 0.4-0.6 V. The device is a unique coupling between the piezoelectric property of the ZnO PFW and the semiconductor performance of the SWNT with a full utilization of its mobility. The newly demonstrated device has potential applications as a strain sensor, force/pressure monitor, security trigger, and analog-signal touch screen.

We report here a simple and effective approach, named scalable sweeping-printing-method, for fabricating flexible high-output nanogenerator (HONG) that can effectively harvesting mechanical energy for driving a small commercial electronic component. The technique consists of two main steps. In the first step, the vertically aligned ZnO nanowires (NWs) are transferred to a receiving substrate to form horizontally aligned arrays. Then, parallel stripe type of electrodes are deposited to connect all of the NWs together. Using a single layer of HONG structure, an open-circuit voltage of up to 2.03 V and a peak output power density of approximately 11 mW/cm(3) have been achieved. The generated electric energy was effectively stored by utilizing capacitors, and it was successfully used to light up a commercial light-emitting diode (LED), which is a landmark progress toward building self-powered devices by harvesting energy from the environment. This research opens up the path for practical applications of nanowire-based piezoelectric nanogeneragtors for self-powered nanosystems.

Catalyst-free, direct heteroepitaxial growth of vertical InAs nanowires on Si(111) substrates was accomplished over a large area by metal-organic chemical vapor deposition. Nanowires showed very uniform diameters and a zinc blende crystal structure. The heterojunctions formed at the interface between the n-type InAs nanowires and the p-type Si substrate were exploited to fabricate vertical array photodiode devices which showed an excellent rectification ratio and low reverse leakage current. Temperature-dependent current transport across the heterojunctions was studied theoretically and experimentally in the dark and under AM 1.5 illumination. When operated in photovoltaic mode, the open-circuit voltage was found to increase linearly with decreasing temperature while the energy conversion efficiency changed nonmonotonically with a maximum of 2.5% at 110 K. Modeling of the nanowire/substrate heterojunctions showed good agreement with the experimental observations, and allowed determining the conduction band offset between the InAs nanowires and Si to be 0.10-0.15 eV. The external quantum efficiency and photoresponsivity profiles of the device showed a broad spectral response from the visible to the infrared region, indicating potential applications as a broad band photovoltaic cell or a visible-infrared dual-band photodetector.

The physical behaviors of stationary cells, such as the morphology, motility, adhesion, anchorage, invasion and metastasis, are likely to be important for governing their biological characteristics. A change in the physical properties of mammalian cells could be an indication of disease. In this paper, we present a silicon-nanowire-array based technique for quantifying the mechanical behavior of single cells representing three distinct groups: normal mammalian cells, benign cells (L929), and malignant cells (HeLa). By culturing the cells on top of NW arrays, the maximum traction forces of two different tumor cells (HeLa, L929) have been measured by quantitatively analyzing the bending of the nanowires. The cancer cell exhibits a larger traction force than the normal cell by ∼20% for a HeLa cell and ∼50% for a L929 cell. The traction forces have been measured for the L929 cells and mechanocytes as a function of culture time. The relationship between cells extending area and their traction force has been investigated. Our study is likely important for studying the mechanical properties of single cells and their migration characteristics, possibly providing a new cellular level diagnostic technique. A change in the physical properties of mammalian cells is important for understanding the biological behavior of cells and disease diagnosis. 1-3 Some kinds of malignant cells are difficult to diagnose from normal cells just by morphological analysis, which is a routine cancer cell detection method. The physical properties of stationary cells, especially the cell traction force (CTF), are of special interest because they are crucial to many biological processes such as morphology, extracellular matrix (ECM) generation, mechanical signal transmission, and cell migration. The measurements are potentially useful for understanding the processes of wound healing, inflammation, embryogenesis, angiogenesis, histogenesis, invasion, and cancer metastasis. 4-7 The basic process for cells to generate traction force is the actomyosin tension and actin polymerization that contract the cell body and stress fibers, which transmit the constriction force to ECM via focal adhesion proteins. 3,6 In an assembly of focal adhesion proteins, integrins are the primary mediators

We demonstrate the first electric field induced transverse deflection of a single-crystal, free-standing ZnO microbelt as a result of converse piezoelectric effect. For a microbelt growing along the c-axis, a shear stress in the a-c plane can be induced when an electric field E is applied along the a-axis of the wurtzite structure. As amplified by the large aspect ratio of the microbelt that grows along the c-axis, the strain localized near the root can be detected via the transverse deflection perpendicular to the ZnO microbelt. After an experimental approach was carefully designed and possible artifacts were ruled out, the experimentally observed degree of deflection of the microbelt agrees well with the theoretically expected result. The device demonstrated has potential applications as transverse actuators/sensors/switches and electric field induced mechanical deflectors.

Using phosphorus-doped ZnO nanowire (NW) arrays grown on silicon substrate, energy conversion using the p-type ZnO NWs has been demonstrated for the first time. The p-type ZnO NWs produce positive output voltage pulses when scanned by a conductive atomic force microscope (AFM) in contact mode. The output voltage pulse is generated when the tip contacts the stretched side (positive piezoelectric potential side) of the NW. In contrast, the n-type ZnO NW produces negative output voltage when scanned by the AFM tip, and the output voltage pulse is generated when the tip contacts the compressed side (negative potential side) of the NW. In reference to theoretical simulation, these experimentally observed phenomena have been systematically explained based on the mechanism proposed for a nanogenerator.

We have investigated the behavior of free charge carriers in a bent piezoelectric semiconductive nanowire under thermodynamic equilibrium conditions. For a laterally bent n-type ZnO nanowire, with the stretched side exhibiting positive piezoelectric potential and the compressed side negative piezoelectric potential, the conduction band electrons tend to accumulate at the positive side. The positive side is thus partially screened by free charge carriers while the negative side of the piezoelectric potential preserves as long as the donor concentration is not too high. For a typical ZnO nanowire with diameter 50 nm, length 600 nm, donor concentration N(D) = 1 x 10(17) cm(-3) under a bending force of 80 nN, the potential in the positive side is

We present a new approach to a nanogenerator (NG) that is composed of integrated, paired nanobrushes made of pyramid-shaped metal-coated ZnO nanotip (NTP) arrays and hexagonal-prism-shaped ZnO nanowire (NW) arrays, which were synthesized using a chemical approach at100 degrees C on the two surfaces of a common substrate, respectively. The operation of the NGs relies on mechanical deflection/bending of the NWs, in which resonance of NWs is not required to activate the NG. This largely expands the application of the NGs from low frequency (approximately the hertz range) to a relatively high frequency (approximately the megahertz range) for effectively harvesting mechanical energies in our living environment. With one piece of such a structure stacked in close proximity over another to form a layer-by-layer matched brush architecture, direct current is generated by exciting the architecture using ultrasonic waves. A four-layer integrated NG is demonstrated to generate an output power density of 0.11 microW/cm(2) at 62 mV. The layer-by-layer assembly provides a feasible technology for building three-dimensional NGs for applications where force or pressure variations are available, such as a shoe pad, an underskin layer for airplanes, and next to a vibration source such as a car engine or tire.

Using a two-end bonded ZnO piezoelectric-fine-wire (PFW) (nanowire, microwire) on a flexible polymer substrate, the strain-induced change in I-V transport characteristic from symmetric to diode-type has been observed. This phenomenon is attributed to the asymmetric change in Schottky-barrier heights at both source and drain electrodes as caused by the strain-induced piezoelectric potential-drop along the PFW, which have been quantified using the thermionic emission-diffusion theory. A new piezotronic switch device with an "on" and "off" ratio of approximately 120 has been demonstrated. This work demonstrates a novel approach for fabricating diodes and switches that rely on a strain governed piezoelectric-semiconductor coupling process.

We demonstrate a mechanical-electrical trigger using a ZnO piezoelectric fine-wire (PFW) (microwire, nanowire). Once subjected to mechanical impact, a bent PFW creates a voltage drop across its width, with the tensile and compressive surfaces showing positive and negative voltages, respectively. The voltage and current created by the piezoelectric effect could trigger an external electronic system, thus, the impact force/pressure can be detected. The response time of the trigger/sensor is approximately 10 ms. The piezoelectric potential across the PFW has a lifetime of approximately 100 s, which is long enough for effectively "gating" the transport current along the wire; thus a piezoelectric field effect transistor is possible based on the piezotronic effect.

We have demonstrated a prototype ZnO nanowire based nanogenerator (NG) that can effectively generate electricity inside biofluid when stimulated by ultrasonic waves. The potential of increasing output current and voltage was illustrated by connecting multiple NGs in parallel and serial, respectively, clearly demonstrating the possibility of raising output power by three-dimensional integration and architecture. The output current was increased by 20 -30 times and reached as high as 35 nA whe na2m m 2 size NG was placed at a region where the ultrasonic waves were focused. This work unambiguously shows the feasibility of NGs for power conversion inside biofluid. It sets a solid foundation for self-powering implantable and wireless nanodevices and nanosystems in biofluid and any other type of liquid.

By functionalizing the surfaces of ZnO nanobelts (NBs) with a thin self-assembled molecular layer, the electrical and optoelectronic performances of a single NB-based device are drastically improved. For a single NB-based device, due to energy band tuning and surface modification, the conductance was enhanced by 6 orders of magnitude upon functionalization; a coating molecule layer has changed a Schottky contact into an Ohmic contact without sophisticated deposition of multilayered metals. A functionalized NB showed negative differential resistance and exhibited huge improved photoconductivity and gas sensing response. The functionalized molecular layer also greatly reduced the etching rate of the ZnO NBs by buffer solution, largely extending their life time for biomedical applications. Our study demonstrates a new approach for improving the physical properties of oxide NBs and nanowires for device applications.

An electric field built inside a crystal was proposed to enhance photoinduced carrier separation for improving photocatalytic property of semiconductor photocatalysts. However, a static built-in electric field can easily be saturated by the free carriers due to electrostatic screening, and the enhancement of photocatalysis, thus, is halted. To overcome this problem, here, we propose sonophotocatalysis based on a new hybrid photocatalyst, which combines ferroelectric nanocrystals (BaTiO3) and semiconductor nanoparticles (Ag2O) to form an Ag2O-BaTiO3 hybrid photocatalyst. Under periodic ultrasonic excitation, a spontaneous polarization potential of BaTiO3 nanocrystals in responding to ultrasonic wave can act as alternating built-in electric field to separate photoinduced carriers incessantly, which can significantly enhance the photocatalytic activity and cyclic performance of the Ag2O-BaTiO3 hybrid structure. The piezoelectric effect combined with photoelectric conversion realizes an ultrasonic-wave-driven piezophototronic process in the hybrid photocatalyst, which is the fundamental of sonophotocatalysis.

Large strain plasticity is phenomenologically defined as the ability of a material to exhibit an exceptionally large deformation rate during mechanical deformation. It is a property that is well established for metals and alloys but is rarely observed for ceramic materials especially at low temperature ( approximately 300 K). With the reduction in dimensionality, however, unusual mechanical properties are shown by ceramic nanomaterials. In this Letter, we demonstrated unusually large strain plasticity of ceramic SiC nanowires (NWs) at temperatures close to room temperature that was directly observed in situ by a novel high-resolution transmission electron microscopy technique. The continuous plasticity of the SiC NWs is accompanied by a process of increased dislocation density at an early stage, followed by an obvious lattice distortion, and finally reaches an entire structure amorphization at the most strained region of the NW. These unusual phenomena for the SiC NWs are fundamentally important for understanding the nanoscale fracture and strain-induced band structure variation for high-temperature semiconductors. Our result may also provide useful information for further studying of nanoscale elastic-plastic and brittle-ductile transitions of ceramic materials with superplasticity.

Hierarchical tree-shaped nanostructures, nanobelts, and nanowires of Zn3P2 were synthesized in a thermal assisted laser ablation process. All nanostructures are tetragonal phased Zn3P2 with excellent crystallinity and are free from an oxidization layer according to electron microscopy and X-ray diffraction analyses. Optical measurement revealed a strong absorption from the ultraviolet to near-infrared regions. Optoelectronic devices fabricated using individual nanowires demonstrate a high sensitivity and rapid response to impinging light. A crossed heterojunction of an n-type ZnO nanowire and a p-type Zn3P2 nanowire has been characterized, and it offers a great potential for a high efficient spatial resolved photon detector.

This paper presents the experimental observation of piezoelectric generation from a single ZnO wire/belt for illustrating a fundamental process of converting mechanical energy into electricity at nanoscale. By deflecting a wire/belt using a conductive atomic force microscope tip in contact mode, the energy is first created by the deflection force and stored by piezoelectric potential, and later converts into piezoelectric energy. The mechanism of the generator is a result of coupled semiconducting and piezoelectric properties of ZnO. A piezoelectric effect is required to create electric potential of ionic charges from elastic deformation; semiconducting property is necessary to separate and maintain the charges and then release the potential via the rectifying behavior of the Schottky barrier at the metal-ZnO interface, which serves as a switch in the entire process. The good conductivity of ZnO is rather unique because it makes the current flow possible. This paper demonstrates a principle for harvesting energy from the environment. The technology has the potential of converting mechanical movement energy (such as body movement, muscle stretching, blood pressure), vibration energy (such as acoustic/ultrasonic wave), and hydraulic energy (such as flow of body fluid, blood flow, contraction of blood vessels) into electric energy that may be sufficient for self-powering nanodevices and nanosystems in applications such as in situ, real-time, and implantable biosensing, biomedical monitoring, and biodetection.

Rectifying diodes of single nanobelt/nanowire-based devices have been fabricated by aligning single ZnO nanobelts/nanowires across paired Au electrodes using dielectrophoresis. A current of 0.5 microA at 1.5 V forward bias has been received, and the diode can bear an applied voltage of up to 10 V. The ideality factor of the diode is approximately 3, and the on-to-off current ratio is as high as 2,000. The detailed IV characteristics of the Schottky diodes have been investigated at low temperatures. The formation of the Schottky diodes is suggested due to the asymmetric contacts formed in the dielectrophoresis aligning process.