Search

Hybrid semiconductor-superconductor nanowires have emerged as a cornerstone in modern quantum devices. Integrating such nanowires into hybrid devices typically requires extensive postgrowth processing which may affect device performance unfavorably. Here, we present a technique for in situ shadowing superconductors on nanowires and compare the structural and electronic properties of Al junctions formed by shadowing versus etching. Based on transmission electron microscopy, we find that typical etching procedures lead to atomic-scale surface roughening. This surface perturbation may cause a reduction of the electron mobility as demonstrated in transport measurements. Further, we display advanced shadowing geometries aiding in the pursuit of bringing fabrication of hybrid devices in situ. Finally, we give examples of shadowed junctions exploited in various device geometries that exhibit high-quality quantum transport signatures.

Understanding heating and cooling mechanisms in mesoscopic superconductor-semiconductor devices is crucial for their application in quantum technologies. Owing to their poor thermal conductivity, heating effects can drive superconducting-to-normal transitions even at low bias, observed as sharp conductance dips through the loss of Andreev excess currents. Tracking such dips across magnetic field, cryostat temperature, and applied microwave power allows us to uncover cooling bottlenecks in different parts of a device. By applying this "Joule spectroscopy" technique, we analyze heat dissipation in devices based on InAs-Al nanowires and reveal that cooling of superconducting islands is limited by the rather inefficient electron-phonon coupling, as opposed to grounded superconductors that primarily cool by quasiparticle diffusion. We show that powers as low as 50-150 pW are able to suppress superconductivity on the islands. Applied microwaves lead to similar heating effects but are affected by the interplay of the microwave frequency and the effective electron-phonon relaxation time.

Implementing superconductors capable of proximity-inducing a large energy gap in semiconductors in the presence of strong magnetic fields is a major goal toward applications of semiconductor/superconductor hybrid materials in future quantum information technologies. Here, we study the performance of devices consisting of InAs nanowires in electrical contact with molybdenum-rhenium (MoRe) superconducting alloys. The MoRe thin films exhibit transition temperatures of ∼10 K and critical fields exceeding 6 T. Normal/superconductor devices enabled tunnel spectroscopy of the corresponding induced superconductivity, which was maintained up to ∼10 K, and MoRe-based Josephson devices exhibited supercurrents and multiple Andreev reflections. We determine an induced superconducting gap lower than expected from the transition temperature and observe gap softening at finite magnetic field. These may be common features for hybrids based on large-gap, type II superconductors. The results encourage further development of MoRe-based hybrids.

We characterize in situ grown parallel nanowires bridged by a superconducting island. The magnetic-field and temperature dependence of Coulomb blockade peaks measured across different pairs of nanowire ends suggest the presence of a subgap state extended over the hybrid parallel-nanowire island. Being gate-tunable, accessible by multiple terminals, and free of quasiparticle poisoning, these nanowires show promise for the implementation of several proposals that rely on parallel nanowire platforms.

We report in situ synthesis of crystalline indium islands on InAs nanowires grown by molecular beam epitaxy. Structural analysis by transmission electron microscopy showed that In crystals grew in a tetragonal body-centered crystal structure within two families of orientations relative to wurtzite InAs. The crystalline islands had lengths < 500 nm and low-energy surfaces, suggesting that growth was driven mainly by surface energy minimization. Electrical transport through In/InAs devices exhibited Cooper pair charging, evidencing charge parity preservation and a pristine In/InAs interface, with an induced superconducting gap ∼ 0.45 meV. Cooper pair charging persisted to temperatures > 1.2 K and magnetic fields ∼ 0.7 T, demonstrating that In/InAs hybrids belong to an expanding class of semiconductor/superconductor hybrids operating over a wider parameter space than state-of-the-art Al-based hybrids. Engineering crystal morphology while isolating single islands using shadow epitaxy provides an interesting alternative to previous semiconductor/superconductor hybrid morphologies and device geometries.

Gate-controlled supercurrent (GCS) in superconducting nanobridges has recently attracted attention as a means to create superconducting switches. Despite the clear advantages for applications, the microscopic mechanism of this effect is still under debate. In this work, we realize GCS for the first time in a highly crystalline superconductor epitaxially grown on an InAs nanowire. We show that the supercurrent in the epitaxial Al layer can be switched to the normal state by applying ≃±23 V on a bottom gate insulated from the nanowire by a crystalline hBN layer. Our extensive study of the temperature and magnetic field dependencies suggests that the electric field is unlikely to be the origin of GCS in our device. Though hot electron injection alone cannot explain our experimental findings, a very recent non-equilibrium phonons based picture is compatible with most of our results.

III-V compound nanowires have electrical and optical properties suitable for a wide range of applications, including photovoltaics and photodetectors. Furthermore, their elastic nature allows the use of strain engineering to enhance their performance. Here we have investigated the effect of mechanical strain on the photocurrent and the electrical properties of single GaAs nanowires with radial p-i-n junctions, using a nanoprobing setup. A uniaxial tensile strain of 3% resulted in an increase in photocurrent by more than a factor of 4 during NIR illumination. This effect is attributed to a decrease of 0.2 eV in nanowire bandgap energy, revealed by analysis of the current-voltage characteristics as a function of strain. This analysis also shows how other properties are affected by the strain, including the nanowire resistance. Furthermore, electron-beam-induced current maps show that the charge collection efficiency within the nanowire is unaffected by strain measured up to 0.9%.

Coupling individual atoms fundamentally changes the state of matter: electrons bound to atomic cores become delocalized turning an insulating state to a metallic one. A chain of atoms could lead to more exotic states if the tunneling takes place via the superconducting vacuum and can induce topologically protected excitations like Majorana or parafermions. Although coupling a single atom to a superconductor is well studied, the hybridization of two sites with individual tunability was not reported yet. The peculiar vacuum of the Bardeen-Cooper-Schrieffer (BCS) condensate opens the way to annihilate or generate two electrons from the bulk resulting in a so-called Andreev molecular state. By employing parallel nanowires with an Al shell, two artificial atoms were created at a minimal distance with an epitaxial superconducting link between. Hybridization via the BCS vacuum was observed and the spectrum of an Andreev molecule as a function of level positions was explored for the first time.

Free-standing semiconductor nanowires constitute an ideal material system for the direct manipulation of electrical and optical properties by strain engineering. In this study, we present a direct quantitative correlation between electrical conductivity and nanoscale lattice strain of individual InAs nanowires passivated with a thin epitaxial In 0.6 Ga 0.4 As shell. With an in situ electron microscopy electromechanical testing technique, we show that the piezoresistive response of the nanowires is greatly enhanced compared to bulk InAs, and that uniaxial elastic strain leads to increased conductivity, which can be explained by a strain-induced reduction in the band gap. In addition, we observe inhomogeneity in strain distribution, which could have a reverse effect on the conductivity by increasing the scattering of charge carriers. These results provide a direct correlation of nanoscale mechanical strain and electrical transport properties in free-standing nanostructures.

Epitaxially connected nanowires allow for the design of electron transport experiments and applications beyond the standard two terminal device geometries. In this Letter, we present growth methods of three distinct types of wurtzite structured InAs nanocrosses via the vapor-liquid-solid mechanism. Two methods use conventional wurtzite nanowire arrays as a 6-fold hexagonal basis for growing single crystal wurtzite nanocrosses. A third method uses the 2-fold cubic symmetry of (100) substrates to form well-defined coherent inclusions of zinc blende in the center of the nanocrosses. We show that all three types of nanocrosses can be transferred undamaged to arbitrary substrates, which allows for structural, compositional, and electrical characterization. We further demonstrate the potential for synthesis of as-grown nanowire networks and for using nanowires as shadow masks for in situ fabricated junctions in radial nanowire heterostructures.

Here we investigate the feasibility of silver as seed-particle material to synthesize GaAs nanowires and show that both crystal phase and growth direction can be controlled by choice of substrate orientation. A (111)B substrate orientation can be used to form vertically aligned wurtzite GaAs nanowires and a (100) substrate orientation to form vertically aligned zinc blende GaAs nanowires. A 45-50% yield of vertical nanowire growth is achieved on the (100) substrate orientation without employing any type of surface modification or nucleation strategy to promote a vertical growth direction. In addition, photoluminescence measurements reveal that the photon emission from the silver seeded wurtzite GaAs nanowires is characterized by a single and narrow emission peak at 1.52 eV.

Semiconducting nanowires (NWs) are a versatile, highly tunable material platform at the heart of many new developments in nanoscale and quantum physics. Here, we demonstrate charge pumping, that is, the controlled transport of individual electrons through an InAs NW quantum dot (QD) device at frequencies up to 1.3 GHz. The QD is induced electrostatically in the NW by a series of local bottom gates in a state of the art device geometry. A periodic modulation of a single gate is enough to obtain a dc current proportional to the frequency of the modulation. The dc bias, the modulation amplitude and the gate voltages on the local gates can be used to control the number of charges conveyed per cycle. Charge pumping in InAs NWs is relevant not only in metrology as a current standard, but also opens up the opportunity to investigate a variety of exotic states of matter, for example, Majorana modes, by single electron spectroscopy and correlation experiments.

High aspect ratio nanostructures have gained increasing interest as highly sensitive platforms for biosensing. Here, well-defined biofunctionalized vertical indium arsenide nanowires are used to map the interaction of light with nanowires depending on their orientation and the excitation wavelength. We show how nanowires act as antennas modifying the light distribution and the emitted fluorescence. This work highlights an important optical phenomenon in quantitative fluorescence studies and constitutes an important step for future studies using such nanostructures.

Over the past decade, the properties of plasmonic waveguides have extensively been studied as key elements in important applications that include biosensors, optical communication systems, quantum plasmonics, plasmonic logic, and quantum-cascade lasers. Whereas their guiding properties are by now fairly well-understood, practical implementation in chipscale systems is hampered by the lack of convenient electrical excitation schemes. Recently, a variety of surface plasmon lasers have been realized, but they have not yet been waveguide-coupled. Planar incoherent plasmonic sources have recently been coupled to plasmonic guides but routing of plasmonic signals requires coupling to linear waveguides. Here, we present an experimental demonstration of electrically driven GaAs nanowire light sources integrated with plasmonic nanostrip waveguides with a physical cross-section of 0.08λ(2). The excitation and waveguiding of surface plasmon-polaritons (SPPs) is experimentally demonstrated and analyzed with the help of full-field electromagnetic simulations. Splitting and routing of the electrically generated SPP signals around 90° bends are also shown. The realization of integrated plasmon sources greatly increases the applicability range of plasmonic waveguides and routing elements.

In this paper we introduce a new paradigm for nanowire growth that explains the unwanted appearance of parasitic nonvertical nanowires. With a crystal structure polarization analysis of the initial stages of GaAs nanowire growth on Si substrates, we demonstrate that secondary seeds form due to a three-dimensional twinning phenomenon. We derive the geometrical rules that underlie the multiple growth directions observed experimentally. These rules help optimizing nanowire array devices such as solar or water splitting cells or of more complex hierarchical branched nanowire devices.

Au free GaAs nanowires with zinc blende structure, free of twin planes and with remarkable aspect ratios, have been grown on (111) Si substrates by molecular beam epitaxy. Nanowires with diameters down to 20 nm are obtained using a thin native oxide layer on the Si substrates. We discuss how the structural phase distribution along the wire length is controlled by the effective V/III ratio and temperature at the growth interface and explain how to obtain a pure twin plane free zinc blende structure.

We present an investigation of the morphology and composition of novel types of axial nanowire heterostructures where Ga(x)In(1-x)As is used as barrier material in InAs nanowires. Using aberration-corrected scanning transmission electron microscopy and energy dispersive X-ray analysis we demonstrate that it is possible to grow junctions by changing the group III elements, and we find that a substantial fraction of Ga can be incorporated in axial InAs/Ga(x)In(1-x)As/InAs, retaining straight nanowire configurations. We explain how the adatoms are transferred to the incorporation site at the growth interface via two different routes, (1) interface diffusion and (2) volume diffusion through the catalyst particle.

Electronic devices made from carbon nanotubes (CNTs) can be greatly affected by substrate charges, which, for instance, induce strong hysteresis in CNT field effect transistors. In this work, electrostatic force microscopy (EFM) is employed to investigate single-walled nanotubes grown by chemical vapor deposition on SiO2 substrates. We demonstrate the use of this technique to gain quantitative information on the substrate charges. It is found that charge pools with densities around 10(-8) C/cm2 can be trapped inside nanotube loops for extended periods of time, showing that nanotubes can act as confining barriers for substrate charges. The trapped charges can be removed by scanning probe manipulation.