Search

Nanocrystalquantum dots (QDs) are attractive materials for applications as lasermedia because of their bright, size-tunable emission and the flexibilityafforded by colloidal synthesis. Nonradiative Auger recombination,however, hampers optical amplification in QDs by rapidly depletingthe population of gain-active multiexciton states. In order to elucidatethe role of Auger recombination in QD lasing and isolate its influencefrom other factors that might affect optical gain, we study two typesof CdSe/CdS core/shell QDs with the same core radii and the same totalsizes but different properties of the core/shell interface (“sharp”vs “smooth”). These samples exhibit distinctly differentbiexciton Auger lifetimes but are otherwise virtually identical. Thesuppression of Auger recombination in the sample with a smooth (alloyed)interface results in a notable improvement in the optical gain performancemanifested in the reduction of the threshold for amplified spontaneousemission and the ability to produce dual-color lasing involving boththe band-edge (1S) and the higher-energy (1P) electronic states. Wedevelop a model, which explicitly accounts for the multiexciton natureof optical gain in QDs, and use it to analyze the competition betweenstimulated emission from multiexcitons and their decay via Auger recombination.These studies re-emphasize the importance of Auger recombination controlfor the realization of real-life QD-based lasing technologies andoffer practical strategies for suppression of Auger recombinationvia “interface engineering” in core/shell structures. [ABSTRACT FROM AUTHOR]

A systematic analysis of the exciton-recombination zone within all-quantum dot (QD) multilayer films prepared by a layer-by-layer assembly method was made, using sensing QD layers in QD-based light-emitting diodes (QLEDs). Large area practical multicolored colloidal QLEDs were also demonstrated by patterning and placing variously colored QDs (red, orange, yellow-green, and green) in the exciton-recombination zone. [ABSTRACT FROM AUTHOR]

Luminescent solar concentrators (LSCs) can serve as large-area sunlight collectors for photovoltaic devices. An important LSC characteristic is a concentration factor (C), which is defined as the ratio of the output and the input photon flux densities. This parameter can be also thought of as an effective enlargement factor of a solar cell active area. On the basis of thermodynamic considerations, the C-factor can reach extremely high values that exceed those accessible with traditional concentrating optics. In reality, however, the best reported values of C are around 30. Here we demonstrate that using a new type of high-emissivity quantum dots (QDs) incorporated into a specially designed cavity, we are able to achieve the C of ~62 for spectrally integrated emission and ~120 for the red portion of the photoluminescence spectrum. The key feature of these QDs is a seed/quantum-well/thick-shell design, which allows for obtaining a high emission quantum yield (>95%) simultaneously with a large LSC quality factor (QLSC of ~100) defined as the ratio of absorption coefficients at the wavelengths of incident and reemitted light. By incorporating the QDs into a specially designed cavity equipped with a top selective reflector (a Bragg mirror or a thin silver film), we are able to effectively recycle reemitted light achieving light trapping coefficients of ~85%. The observed performance of these devices is in remarkable agreement with analytical modeling, which allows us to project that the applied approach should allow one to boost the spectrally integrated concentration factors to more than 100 by further improving light trapping and/or increasing QLSC. [ABSTRACT FROM AUTHOR]

Herein, we report unique features of the assemblies of tetrapod-shaped colloidal nanocrystals (TpNCs) with lengthy arms applicable to flexible thin-film transistors. Due to the extended nature of tetrapod geometry, films made of the TpNC assemblies require reduced numbers of inter-NC hopping for the transport of charge carriers along a given channel length; thus, enhanced conductivity can be achieved compared to those made of typical spherical NCs without arms. Moreover, electrical conduction through the assemblies is tolerant against mechanical bending because interconnections between TpNCs can be well-preserved under bending. Interestingly, both the conductivity of the assemblies and their mechanical tolerance against bending are improved with an increase in the length of tetrapod arms. The arm length-dependency was demonstrated in a series of CdSe TpNC assemblies with different arm lengths (l = 0-90 nm), whose electrical conduction was modulated through electrolyte gating. From the TpNCs with the longest arm length included in the study (l = 90 nm), the film conductivity as high as 20 S/cm was attained at 3 V of gate voltage, corresponding to electron mobility of >10 cm²/(V s) even when evaluated conservatively. The high channel conductivity was retained (~90% of the value obtained from the flat geometry) even under high bending (bending radius = 5 mm). The results of the present study provide new insights and guidelines for the use of colloidal nanocrystals in solution-processed flexible electronic device applications. [ABSTRACT FROM AUTHOR]

Ratiometric pressure sensitive paints (r-PSPs) are all-optical probes for monitoring oxygen flows in the vicinity of complex or miniaturized surfaces. They typically consist of a porous binder embedding mixtures of a reference and a sensor chromophore exhibiting oxygen-insensitive and oxygen-responsive luminescence, respectively. Here, we demonstrate the first example of an r-PSP based on a single two-color emitter that removes limitations of r-PSPs based on chromophore mixtures such as different temperature dependencies of the two chromophores, cross-readout between the reference and sensor signals and phase segregation. In our approach, we utilize a novel "double-sensor" r-PSP that features two spectrally separated emission bands with opposite responses to the O2 pressure, which boosts the sensitivity with respect to traditional reference-sensor pairs. Specifically, we use two-color-emitting dot-in-bulk CdSe/CdS core/shell nanocrystals, exhibiting red and green emission bands from their core and shell states, whose intensities are respectively enhanced and quenched in response to the increased oxygen partial pressure that effectively tunes the position of the nanocrystal's Fermi energy. This leads to a strong and reversible ratiometric response at the single particle level and an over 100% enhancement in the pressure sensitivity. Our proof-of-concept r-PSPs further exhibit suppressed cross-readout thanks to zero spectral overlap between the core and shell luminescence bands and a temperature-independent ratiometric response between 0 and 70 °C. [ABSTRACT FROM AUTHOR]