Search

High power K+ ion capacitors have great potential in various large-scale applications because of the cost advantages and the low redox potential of K/K+. However, the large ionic radius of potassium brings huge challenges for the development of suitable electrode materials. Here we demonstrate a general strategy for preparing porous MXene electrodes that can significantly enhance K+ storage performance. Using V2C MXene as a model system, we show that the K+ ion storage capacity can be greatly boosted by a simple sequential acid/alkali treatment. The resulting product, K–V2C, not only delivers a capacity of 195 mAh g−1 (in contrast to 98 mAh g−1 of pristine V2C) at 50 mA g−1, but also good rate performance. The charge storage mechanism was carefully studied and is shown to involve a solvent co-intercalation process. In addition, full cells were fabricated by coupling the K–V2C anode and Prussian blue analogous (KxMnFe(CN)6) cathode, which can work at a high average operating voltage of ~3.3 V within a wide range (0.01 V–4.6 V). Moreover, the devices can achieve a high energy density of 145 Wh kg−1 at a power density of 112.6 W kg−1, suggesting that K–V2C, and other porous MXenes prepared by our approach, are promising electrodes in mobile ion capacitors.

Vanadium diselenide (VSe2) is a transition metal dichalcogenide with metallic conductivity, which makes it a potentially promising electrode material for electrochemical applications. However, the development of VSe2 electrodes for such applications has been severely hampered by the difficulty of preparing nanosized products. In this work, a new facile solvothermal synthesis process is developed and optimized to synthesize ultrathin VSe2 nanosheet assemblies. To obtain the ultrathin nanosheets, N-methyl pyrrolidone, which has similar surface energy to many transition metal dichalcogenides, was used as the solvent to limit the crystal growth along the c-axis direction. The resulting ultrathin VSe2 nanosheets exhibit good performance toward alkaline ion (Li+ and Na+) storage, which can be significantly enhanced by carbon coating. Specifically, the carbon-coated VSe2 nanosheets can deliver high capacities of 768 mA h g-1 (Li+ storage) and 571 mA h g-1 (Na+ storage) along with outstanding stability.

We report a phosphine (PH3) plasma activation strategy for significantly boosting the electrochemical performance of supercapacitor electrodes. Using Fe2O3 as a demonstration, we show that the plasma activation simultaneously improves the conductivity, creates atomic-scale vacancies (defects), as well as increases active surface area, and thus leading to a greatly enhanced performance with a high areal capacitance of 340 mF cm−2 at 1 mA cm−2, compared to 66 mF cm−2 of pristine Fe2O3. Moreover, the asymmetric supercapacitor devices based on plasma-activated Fe2O3 anodes and electrodeposited MnO2 cathodes can achieve a high stack energy density of 0.42 mW h cm−3 at a stack power density of 10.3 mW cm−3 along with good stability (88% capacitance retention after 9000 cycles at 10 mA cm−2). Our work provides a simple yet effective strategy to greatly enhance the electrochemical performance of Fe2O3 anodes and to further promote their application in asymmetric supercapacitors.

We report a versatile route for the preparation of metal phosphides using PH3 plasma for supercapacitor applications. The high reactivity of plasma allows rapid and low temperature conversion of hydroxides into monometallic, bimetallic, or even more complex nanostructured phosphides. These same phosphides are much more difficult to synthesize by conventional methods. Further, we present a general strategy for significantly enhancing the electrochemical performance of monometallic phosphides by substituting extrinsic metal atoms. Using NiCoP as a demonstration, we show that the Co substitution into Ni2P not only effectively alters the electronic structure and improves the intrinsic reactivity and electrical conductivity, but also stabilizes Ni species when used as supercapacitor electrode materials. As a result, the NiCoP nanosheet electrodes achieve high electrochemical activity and good stability in 1 M KOH electrolyte. More importantly, our assembled NiCoP nanoplates//graphene films asymmetric supercapacitor devices can deliver a high energy density of 32.9 Wh kg−1 at a power density of 1301 W kg−1, along with outstanding cycling performance (83% capacity retention after 5000 cycles at 20 A g−1). This activity outperforms most of the NiCo-based materials and renders the NiCoP nanoplates a promising candidate for capacitive storage devices.

We report a novel flexible solar tracking system based on a photothermal-thermomechanical (PT-TM) actuator comprised of Ti3C2Tx MXene and polyvinylidene fluoride (PVDF) bilayer. The actuation function of the proposed device originates from photothermal and surface plasmon-assisted effects in MXenes, coupled with thermomechanical deformation of in-plane aligned PVDF polymer. Two types of solar tracking modes are evaluated based on the experimental deformation behavior of the PT-TM actuator. We find that the uniaxial East-West solar tracking option increases the overall energy intensity reaching the solar module by over 30%, in comparison with the optimized tilting-controlled mode. We also demonstrate the thermally driven self-oscillation of the MXene-PVDF device, which may have promising potential for optically and thermally driven soft robotics. The PT-TM actuator devices display robust mechanical strength and durability, with no noticeable degradation in their performance after more than 1000 cycles.