Search

The research on boron/nitrogen (B/N)-based multiresonance thermally activated delayed fluorescence (MR-TADF) emitters has been a prominent topic due to their narrowband emission and high luminous efficiency. However, devices derived from the common types of narrowband TADF materials often experience an efficiency roll-off, which could be ascribed to their relatively slow triplet–singlet exciton interconversion. Since inserting the heavy Se atom into the B/N scheme has been a proven strategy to address the abovementioned issues, herein, extensive density functional theory (DFT) and time-dependent DFT (TD-DFT) simulations have been employed to explore the effects of the structural modification on a series of structurally modified selenium-doped derivatives. Furthermore, the two-layered ONIOM (QM/MM) model has been employed to study the pressure effects on the crystal structure and photophysical properties of the pristine CzBSe. The theoretical results found that the introduced tert-butyl units in Cz-BSeN could result in a shorter charge transfer distance and smaller reorganization energy than the parent CzBSe. In contrast to directly incorporating the o-carborane (Cb) unit to CzBSe, incorporating the bridged phenyl units is important in order to achieve narrowband emissions and high luminous efficiency. The lowest three triplet excited states of CzBSe, Cz-BSeN and PhCb-BSeN all contribute to their triplet–singlet exciton conversions, resulting in a high utilization of triplet excitons. The pressure has an evident influence on the photophysical properties of the aggregated CzBSe and is favored for obtaining narrowband emissions. Our work is promised to provide a feasible strategy for designing selenium-doped derivatives with narrowband emissions and rapid triplet–singlet exciton interconversions. [ABSTRACT FROM AUTHOR]

This work investigated the substitution of the aldehyde with a pyran functional group in D-π-aldehyde dye to improve cell performance. This strategy was suggested by recent work that synthesized D-π-aldehyde dye, which achieved a maximum absorption wavelength that was only slightly off the threshold for an ideal sensitizer. Therefore, DFT and TD-DFT were used to investigate the effect of different pyran substituents to replace the aldehyde group. The pyran groups reduced the dye energy gap better than other known anchoring groups. The proposed dyes showed facile intermolecular charge transfer through the localization of HOMO and LUMO orbitals on the donor and acceptor parts, which promoted orbital overlap with the TiO2 surface. The studied dyes have HOMO and LOMO energy levels that could regenerate electrons from redox potential electrodes and inject electrons into the TiO2 conduction band. The lone pairs of oxygen atoms in pyran components act as nucleophile centers, facilitating adsorption on the TiO2 surface through their electrophile atoms. Pyrans increased the efficacy of dye sensitizers by extending their absorbance range and causing the maximum peak to redshift deeper into the visible region. The effects of the pyran groups on photovoltaic properties such as light harvesting efficiency (LHE), free energy change of electron injection, and dye regeneration were investigated and discussed. The adsorption behaviors of the proposed dyes on the TiO2 (1 1 0) surface were investigated by means of Monte Carlo simulations. The calculated adsorption energies indicates that pyran fragments, compared to the aldehyde in the main dye, had a greater ability to induce the adsorption onto the TiO2 substrate. [ABSTRACT FROM AUTHOR]

This study employs density functional theory (DFT) calculations at the B3LYP/6-311+g(d,p) level to investigate the interaction of XH3 gases (X = N, P, As) with the Mn-phthalocyanine molecule (MnPc). Grimme's D3 dispersion correction is applied to consider long-range interactions. The adsorption behavior is explored under the influence of an external static electric field (EF) ranging from −0.514 to 0.514 V/Å. Chemical adsorption of XH3 molecules onto the MnPc molecule is confirmed. The adsorption results in a significant decrease in the energy gap (Eg) of MnPc, indicating the potential alteration of its optical properties. Quantum theory of atoms in molecules (QTAIM) analysis reveals partially covalent bonds between XH3 and MnPc, and the charge density differenc (Δρ) calculations suggest a charge donation-back donation mechanism. The UV-vis spectrum of MnPc experiences a blue shift upon XH3 adsorption, highlighting MnPc's potential as a naked-eye sensor for XH3 molecules. Thermodynamic calculations indicate exothermic interactions, with NH3/MnPc being the most stable complex. The stability of NH3/MnPc decreases with increasing temperature. The direction and magnitude of the applied electric field (EF) play a crucial role in determining the adsorption energy (Eads) for XH3/MnPc complexes. The Eg values decrease with an increasing negative EF, which suggests that the electrical conductivity (σ) and the electrical sensitivity (ΔEg) of the XH3/MnPc complexes are influenced by the magnitude and direction of the applied EF. Overall, this study provides valuable insights into the suggested promising prospects for the utilization of MnPc in sensing applications of XH3 gases. [ABSTRACT FROM AUTHOR]

In this study, we present a comprehensive investigation of 2-amino-4,6-diphenylnicotinonitriles (APNs, 1–6), including their synthesis, cytotoxicity against breast cancer cell lines, and photophysical properties. Compound 3 demonstrates exceptional cytotoxicity, surpassing the potency of Doxorubicin. The fluorescence spectra of the synthesized 1–6 in different solvents reveal solvent-dependent shifts in the emission maximum values, highlighting the influence of the solvent environment on their fluorescence properties. A quantum chemical TD-DFT analysis provides insights into the electronic structure and fluorescence behavior of 1–6, elucidating HOMO-LUMO energy gaps, electronegativity values, and dipole moments, contributing to a deeper understanding of their electronic properties and potential reactivity. These findings provide valuable knowledge for the development of APNs (1–6) as fluorescent sensors and potential anticancer agents. [ABSTRACT FROM AUTHOR]

The research on boron/nitrogen (B/N)-based multiresonance thermally activated delayed fluorescence (MR-TADF) emitters has been a prominent topic due to their narrowband emission and high luminous efficiency. However, devices derived from the common types of narrowband TADF materials often experience an efficiency roll-off, which could be ascribed to their relatively slow triplet–singlet exciton interconversion. Since inserting the heavy Se atom into the B/N scheme has been a proven strategy to address the abovementioned issues, herein, extensive density functional theory (DFT) and time-dependent DFT (TD-DFT) simulations have been employed to explore the effects of the structural modification on a series of structurally modified selenium-doped derivatives. Furthermore, the two-layered ONIOM (QM/MM) model has been employed to study the pressure effects on the crystal structure and photophysical properties of the pristine CzBSe. The theoretical results found that the introduced tert-butyl units in Cz-BSeN could result in a shorter charge transfer distance and smaller reorganization energy than the parent CzBSe. In contrast to directly incorporating the o-carborane (Cb) unit to CzBSe, incorporating the bridged phenyl units is important in order to achieve narrowband emissions and high luminous efficiency. The lowest three triplet excited states of CzBSe, Cz-BSeN and PhCb-BSeN all contribute to their triplet–singlet exciton conversions, resulting in a high utilization of triplet excitons. The pressure has an evident influence on the photophysical properties of the aggregated CzBSe and is favored for obtaining narrowband emissions. Our work is promised to provide a feasible strategy for designing selenium-doped derivatives with narrowband emissions and rapid triplet–singlet exciton interconversions.

This work investigated the substitution of the aldehyde with a pyran functional group in D-π-aldehyde dye to improve cell performance. This strategy was suggested by recent work that synthesized D-π-aldehyde dye, which achieved a maximum absorption wavelength that was only slightly off the threshold for an ideal sensitizer. Therefore, DFT and TD-DFT were used to investigate the effect of different pyran substituents to replace the aldehyde group. The pyran groups reduced the dye energy gap better than other known anchoring groups. The proposed dyes showed facile intermolecular charge transfer through the localization of HOMO and LUMO orbitals on the donor and acceptor parts, which promoted orbital overlap with the TiO2 surface. The studied dyes have HOMO and LOMO energy levels that could regenerate electrons from redox potential electrodes and inject electrons into the TiO2 conduction band. The lone pairs of oxygen atoms in pyran components act as nucleophile centers, facilitating adsorption on the TiO2 surface through their electrophile atoms. Pyrans increased the efficacy of dye sensitizers by extending their absorbance range and causing the maximum peak to redshift deeper into the visible region. The effects of the pyran groups on photovoltaic properties such as light harvesting efficiency (LHE), free energy change of electron injection, and dye regeneration were investigated and discussed. The adsorption behaviors of the proposed dyes on the TiO2 (1 1 0) surface were investigated by means of Monte Carlo simulations. The calculated adsorption energies indicates that pyran fragments, compared to the aldehyde in the main dye, had a greater ability to induce the adsorption onto the TiO2 substrate.

The mechanism of aggregation-induced emission (AIE) for the bis(1-(2,4-difluorophenyl)-1H-pyrazole)(2-(20-hydroxyphenyl)-2-oxazoline)iridium(III) complex, denoted as Ir(dfppz)2(oz), was investigated with use DFT and the TD-DFT level of theory. The mechanism of radiationless deactivation of the triplet state was elucidated. Such a mechanism requires an additional, photophysical triplet channel of the internal conversion (IC) type, which is activated as a result of intramolecular motion deforming the structure of the oz ligand and distorting the iridium coordination sphere. Formally, the rotational movement of the oxazoline relative to the C–C bond in the oz ligand is the main active coordinate that leads to the opening of the triplet channel. The rotation of the oxazoline group and the elongation of the Ir-Nox bond cause a transition between the luminescent, low-lying triplet state with a d / π → π * characteristic ( T 1 (eq) ), and the radiationless d → d triplet state ( T 1 (Ir) ). This transition is made possible by the low energy barrier, which, based on calculations, was estimated at approximately 8.5 kcal/mol. Dimerization, or generally aggregation of the complex molecules, blocks the intramolecular movement in the ligand and is responsible for a strong increase in the energy barrier for the T 1 (eq) ⇝ T 1 (Ir) conversion of triplet states. Thus, the aggregation phenomenon blocks the nonradiative deactivation channel of the excited states and, consequently, contributes to directing the photophysical process toward phosphorescence. The mechanism involved in locking the nonradiative triplet path can be called restricted access to singlet–triplet crossing (RASTC). [ABSTRACT FROM AUTHOR]

Due to their unique photophysical and electronic properties, pyrene and its analogues have been the subject of extensive research in recent decades. The propensity of pyrene and its derivatives to form excimers has found wide application in various fields. Nitrogen-substituted pyrene derivatives display similar photophysical properties, but for them, excimer emission has not been reported to date. Here, we use time-dependent density functional theory (TD-DFT) calculations to investigate the low-lying exciton states of dimers of pyrene and 2-azapyrene. The excimer equilibrium structures are determined and the contribution of charge transfer (CT) excitations and intermolecular interactions to the exciton states is disclosed using a diabatization procedure. The study reveals that the dimers formed by the two molecules have quite similar exciton-state patterns, in which the relevant CT contributions govern the formation of excimer states, along with the La/Lb state inversion. In contrast with pyrene, the dipole–dipole interactions in 2-azapyrene stabilize the dark eclipsed excimer structure and increase the barrier for conversion into a bright twisted excimer. It is suggested that these differences in the nitrogen-substituted derivative might influence the excimer emission properties. [ABSTRACT FROM AUTHOR]

This study demonstrated the capability of two readily available optical spectroscopy tools, namely UV-Vis absorption spectrophotometry and Raman/surface-enhanced Raman spectroscopy, to select in a rapid and noninvasive manner the most homogenous gold nanoparticle (AuNP) models and to identify their chemical binding mechanism to 2-thiouracil (2-TU). 2-TU is an anticancer drug of great promise in the antiproliferative and photothermal therapies of cancer. The citrate-capped AuNPs emerged as the most stable as well as time- and cost-effective AuNP model out of the three widely used colloidal nanocores (citrate-, borohydride-citrate-, and sodium dodecyl sulfate (SDS)-capped AuNPs) that were examined. 2-TU chemically attached to the relatively monodispersed AuNPs via a chemisorption mechanism. The 2-TU-AuNPs complex formed through the covalent bonding of the S atom of 2-TU to the nanosurface in a vertical orientation. The spectroscopic results were then confirmed with the help of density functional theory (DFT) calculations and other physicochemical characterization tools for nanomaterials such as transmission electron microscopy (TEM), dynamic light scattering (DLS), and zeta potential. Overall, the purified 2-TU-AuNPs were found to be spherical, had an average diameter of 25 ± 2 nm, a narrow size distribution (1–30 nm), a sharp localized surface plasmon resonance (LSPR) peak at 525 nm, and a negative surface charge (−14 mV). [ABSTRACT FROM AUTHOR]

The structures of Ag complexes with dimethyl amino phenyl substituted phthalocyanine m[dmaphPcAg]q of various charges q and in the two lowest spin states m were optimized using the B3LYP method within the D4h symmetry group and its subgroups. The most stable reaction intermediate in the supposed photoinitiation reaction is 3[dmaphPcAg]−. Group-theoretical analysis of the optimized structures and of their electron states reveals two symmetry-descent mechanisms. The stable structures of maximal symmetry of complexes 1[dmaphPcAg]+, 3[dmaphPcAg]+, 2[dmaphPcAg]0, and 4[dmaphPcAg]2− correspond to the D4 group as a consequence of the pseudo-Jahn–Teller effect within unstable D4h structure. Complexes 4[dmaphPcAg]0, 1[dmaphPcAg]−, 3[dmaphPcAg]−, and 2[dmaphPcAg]2− with double degenerate electron ground states in D4h symmetry structures undergo a symmetry descent to stable structures corresponding to maximal D2 symmetry, not because of a simple Jahn–Teller effect but due to a hidden pseudo-Jahn–Teller effect (strong vibronic interaction between excited electron states). The reduction of the neutral photoinitiator causes symmetry descent to its anionic intermediate because of vibronic interactions that must significantly affect the polymerization reactions. [ABSTRACT FROM AUTHOR]

The photophysical properties of Cu(II) complexes with 5,10,15,20-meso-tetrakis(phenyl)porphyrin and 5,10,15,20-meso-tetrakis(N-methylpyridium-4-yl)porphyrin are examined via the luminescence and femtosecond time-resolved absorbance methods, respectively. These studies are supported by DFT and TD-DFT calculations, which highlight the important role played by ligand-to-metal charge-transfer states in directing the system toward either intersystem crossing to the triplet hypersurface or coordinative expansion to a five-coordinate quasi-stable intermediate. The latter processes occur when the porphyrin is photolyzed in the presence of suitably located Lewis bases. Femtosecond time-resolved absorbance measurements of Cu(II)-5,10,15,20-meso-tetrakis(N-methylpyridium-4-yl)porphyrin confirm that the coordinative expansion in water occurs in approximately 700 fs, while crossing to the triplet hypersurface takes approximately 140 fs in the same solvent. These processes are mutually exclusive, although both can occur simultaneously depending on the environment of the porphyrin. The ratio of the two processes depends on the relative orientation of the Lewis base with respect to the copper atom at the time of excitation. As a consequence, copper porphyrins such as these are excellent probes in the environment of the porphyrin and can be used to identify the location of the porphyrin when interacting with DNA fragments. [ABSTRACT FROM AUTHOR]

This study employs density functional theory (DFT) calculations at the B3LYP/6-311+g(d,p) level to investigate the interaction of XH3 gases (X = N, P, As) with the Mn-phthalocyanine molecule (MnPc). Grimme’s D3 dispersion correction is applied to consider long-range interactions. The adsorption behavior is explored under the influence of an external static electric field (EF) ranging from −0.514 to 0.514 V/Å. Chemical adsorption of XH3 molecules onto the MnPc molecule is confirmed. The adsorption results in a significant decrease in the energy gap (Eg) of MnPc, indicating the potential alteration of its optical properties. Quantum theory of atoms in molecules (QTAIM) analysis reveals partially covalent bonds between XH3 and MnPc, and the charge density differenc (Δρ) calculations suggest a charge donation-back donation mechanism. The UV-vis spectrum of MnPc experiences a blue shift upon XH3 adsorption, highlighting MnPc’s potential as a naked-eye sensor for XH3 molecules. Thermodynamic calculations indicate exothermic interactions, with NH3/MnPc being the most stable complex. The stability of NH3/MnPc decreases with increasing temperature. The direction and magnitude of the applied electric field (EF) play a crucial role in determining the adsorption energy (Eads) for XH3/MnPc complexes. The Eg values decrease with an increasing negative EF, which suggests that the electrical conductivity (σ) and the electrical sensitivity (ΔEg) of the XH3/MnPc complexes are influenced by the magnitude and direction of the applied EF. Overall, this study provides valuable insights into the suggested promising prospects for the utilization of MnPc in sensing applications of XH3 gases.

In this study, we present a comprehensive investigation of 2-amino-4,6-diphenylnicotinonitriles (APNs, 1–6), including their synthesis, cytotoxicity against breast cancer cell lines, and photophysical properties. Compound 3 demonstrates exceptional cytotoxicity, surpassing the potency of Doxorubicin. The fluorescence spectra of the synthesized 1–6 in different solvents reveal solvent-dependent shifts in the emission maximum values, highlighting the influence of the solvent environment on their fluorescence properties. A quantum chemical TD-DFT analysis provides insights into the electronic structure and fluorescence behavior of 1–6, elucidating HOMO-LUMO energy gaps, electronegativity values, and dipole moments, contributing to a deeper understanding of their electronic properties and potential reactivity. These findings provide valuable knowledge for the development of APNs (1–6) as fluorescent sensors and potential anticancer agents.

The dynamic scenario of di-aryls-pyrano-chromenes was investigated using DFT calculations. The symmetry of the chromene scaffold and the presence of two ortho-substituted aryls substituents can generate two syn/anti diastereoisomers and conformational enantiomers with different rotational barriers. The relative conformations and configurations were derived using NOESY-1D experiments. Depending on the energies related to the conformational exchange, the experimental energy barriers were determined through Dynamic NMR, Dynamic HPLC or kinetic studies. The atropisomeric pairs were resolved in the latter scenario, and their absolute configuration was assigned using the ECD/TD-DFT method. [ABSTRACT FROM AUTHOR]

We report a simple and efficient strategy to enhance the fluorescence of biocompatible biindole diketonates (bdks) in the visible spectrum through difluoroboronation (BF2bdks complexes). Emission spectroscopy testifies an increase in the fluorescence quantum yields from a few percent to as much as >0.7. This massive increment is essentially independent of substitutions at the indole (-H, -Cl, and -OCH3) and corresponds to a significant stabilization of the excited state with respect to non-radiative decay mechanisms: the non-radiative decay rates are reduced by as much as an order of magnitude, from 109 s−1 to 108 s−1, upon difluoroboronation. The stabilization of the excited state is large enough to enable sizeable 1O2 photosensitized production. Different time-dependent (TD) density functional theory (DFT) methods were assessed in their ability to model the electronic properties of the compounds, with TD-B3LYP-D3 providing the most accurate excitation energies. The calculations associate the first active optical transition in both the bdks and BF2bdks electronic spectra to the S0 → S1 transition, corresponding to a shift in the electronic density from the indoles to the oxygens or the O-BF2-O unit, respectively. [ABSTRACT FROM AUTHOR]

A series of multistep synthesis protocols was adopted to synthesize substituted imidazopyridines (IMPs) (SM-IMP-01 to SM-IMP-13, and DA-01-05). All substituted IMPs were then characterized using standard spectroscopic techniques such as 1H-NMR, 13C-NMR, elemental analyses, and mass spectrometry. Our both in vitro qualitative and quantitative results for antibacterial analysis, against Klebsiella pneumoniae ATCC 4352 and Bacillus subtilis ATCC 6051 suggested that all compounds essentially exhibited activity against selected strains of bacteria. Our DFT analyses suggested that the compounds of the SM-IMP-01–SM-IMP-13 series have HOMO/LUMO gaps within 4.43–4.69 eV, whereas the compounds of the DA-01–DA-05 series have smaller values of the HOMO/LUMO gaps, 3.24–4.17 eV. The lowest value of the global hardness and the highest value of the global softness, 2.215 and 0.226 eV, respectively, characterize the compound SM-IMP-02; thus, it is the most reactive compound in the imidazopyridine carboxamide series (except hydrazide series). This compound also depicted lesser MIC values against Klebsiella pneumoniae ATCC 4352 and Bacillus subtilis ATCC 6051 as 4.8 µg/mL, each. In terms of another series, hydrazide DA-05 depicted strong antimicrobial actions (MIC: 4.8 µg/mL against both bacterial strains) and also had the lowest energy gap (3.24 eV), higher softness (0.309 eV), and lesser hardness (1.62 eV). Overall, when we compare qualitative and quantitative antimicrobial results, it is been very clear that compounds with dibromo substitutions on imidazopyridine (IMP) rings would act as better antimicrobial agents than those with -H at the eighth position on the IMP ring. Furthermore, substituents of higher electronegativities would tend to enhance the biological activities of dibromo-IMP compounds. DFT properties were also well comparable to this trend and overall, we can say that the electronic behavior of compounds under investigation has key roles in their bioactivities. [ABSTRACT FROM AUTHOR]

The mechanism of aggregation-induced emission (AIE) for the bis(1-(2,4-difluorophenyl)-1H-pyrazole)(2-(20-hydroxyphenyl)-2-oxazoline)iridium(III) complex, denoted as Ir(dfppz)2(oz), was investigated with use DFT and the TD-DFT level of theory. The mechanism of radiationless deactivation of the triplet state was elucidated. Such a mechanism requires an additional, photophysical triplet channel of the internal conversion (IC) type, which is activated as a result of intramolecular motion deforming the structure of the oz ligand and distorting the iridium coordination sphere. Formally, the rotational movement of the oxazoline relative to the C–C bond in the oz ligand is the main active coordinate that leads to the opening of the triplet channel. The rotation of the oxazoline group and the elongation of the Ir-Nox bond cause a transition between the luminescent, low-lying triplet state with a d/π→π* characteristic (T1(eq)), and the radiationless d→d triplet state (T1(Ir)). This transition is made possible by the low energy barrier, which, based on calculations, was estimated at approximately 8.5 kcal/mol. Dimerization, or generally aggregation of the complex molecules, blocks the intramolecular movement in the ligand and is responsible for a strong increase in the energy barrier for the T1(eq)⇝T1(Ir) conversion of triplet states. Thus, the aggregation phenomenon blocks the nonradiative deactivation channel of the excited states and, consequently, contributes to directing the photophysical process toward phosphorescence. The mechanism involved in locking the nonradiative triplet path can be called restricted access to singlet–triplet crossing (RASTC).

Due to their unique photophysical and electronic properties, pyrene and its analogues have been the subject of extensive research in recent decades. The propensity of pyrene and its derivatives to form excimers has found wide application in various fields. Nitrogen-substituted pyrene derivatives display similar photophysical properties, but for them, excimer emission has not been reported to date. Here, we use time-dependent density functional theory (TD-DFT) calculations to investigate the low-lying exciton states of dimers of pyrene and 2-azapyrene. The excimer equilibrium structures are determined and the contribution of charge transfer (CT) excitations and intermolecular interactions to the exciton states is disclosed using a diabatization procedure. The study reveals that the dimers formed by the two molecules have quite similar exciton-state patterns, in which the relevant CT contributions govern the formation of excimer states, along with the La/Lb state inversion. In contrast with pyrene, the dipole–dipole interactions in 2-azapyrene stabilize the dark eclipsed excimer structure and increase the barrier for conversion into a bright twisted excimer. It is suggested that these differences in the nitrogen-substituted derivative might influence the excimer emission properties.

This study demonstrated the capability of two readily available optical spectroscopy tools, namely UV-Vis absorption spectrophotometry and Raman/surface-enhanced Raman spectroscopy, to select in a rapid and noninvasive manner the most homogenous gold nanoparticle (AuNP) models and to identify their chemical binding mechanism to 2-thiouracil (2-TU). 2-TU is an anticancer drug of great promise in the antiproliferative and photothermal therapies of cancer. The citrate-capped AuNPs emerged as the most stable as well as time- and cost-effective AuNP model out of the three widely used colloidal nanocores (citrate-, borohydride-citrate-, and sodium dodecyl sulfate (SDS)-capped AuNPs) that were examined. 2-TU chemically attached to the relatively monodispersed AuNPs via a chemisorption mechanism. The 2-TU-AuNPs complex formed through the covalent bonding of the S atom of 2-TU to the nanosurface in a vertical orientation. The spectroscopic results were then confirmed with the help of density functional theory (DFT) calculations and other physicochemical characterization tools for nanomaterials such as transmission electron microscopy (TEM), dynamic light scattering (DLS), and zeta potential. Overall, the purified 2-TU-AuNPs were found to be spherical, had an average diameter of 25 ± 2 nm, a narrow size distribution (1–30 nm), a sharp localized surface plasmon resonance (LSPR) peak at 525 nm, and a negative surface charge (−14 mV).

Alzheimer's disease (AD) is a progressive and irreversible neurodegenerative disorder that gradually leads to the state of dementia. The main features of AD include the deposition of amyloid-beta peptides (Aβ), forming senile plaques, and the development of neurofibrillary tangles due to the accumulation of hyperphosphorylated Tau protein (p-tau) within the brain cells. In this report, seven dual-inhibitor molecules (L1–7) that can prevent the aggregation of both Aβ and p-tau are suggested. The drug-like features and identification of the target proteins are analyzed by the in silico method. L1–7 show positive results in both Blood–Brain Barrier (BBB) crossing and gastrointestinal absorption, rendering to the results of the permeation method. The molecular docking test performed for L1–7 shows binding energies in the range of −4.9 to −6.0 kcal/mol towards Aβ, and −4.6 to −5.6 kcal/mol for p-tau. The drug's effectiveness under physiological conditions is assessed by the use of solvation models on the investigated systems. Further, the photophysical properties of L1–3 are predicted using TD-DFT studies. [ABSTRACT FROM AUTHOR]

A reaction of a cyclic trinuclear copper(I) or silver(I) pyrazolate complex ([MPz]3, M = Cu, Ag) with 1,1′-dimethyl-2,2'-bibenzimidazole (L) leads to the formation of tetranuclear adducts decorated by one or two molecules of a diimine ligand, depending on the amount of the ligand added (0.75 or 1.5 equivalents). The coordination of two L molecules stabilizes the formation of a practically idealized tetrahedral four-metal core in the case of a copper-containing complex and a distorted tetrahedron in the case of a Ag analog. In contrast, complexes containing one molecule of diimine possess two types of metals, two- and three-coordinated, forming the significantly distorted central M4 cores. The diimine ligands are twisted in these complexes with dihedral angles of ca. 50–60°. A TD-DFT analysis demonstrated the preference of a triplet state for the twisted 1,1′-dimethyl-2,2'-bibenzimidazole and a singlet state for the planar geometry. All obtained complexes demonstrated, in a solution, the blue fluorescence of the ligand-centered (LC) nature typical for free diimine. In contrast, a temperature decrease to 77 K stabilized the structure close to that observed in the solid state and activated the triplet states, leading to green phosphorescence at ca. 500 nm. The silver-containing complex Ag4Pz4L exhibited dual emission from both the singlet and triplet states, even at room temperature. [ABSTRACT FROM AUTHOR]

Molecular switches which can be triggered by light to interconvert between two or more well-defined conformation differing in their chemical or physical properties are fundamental for the development of materials with on-demand functionalities. Recently, a novel molecular switch based on a the azodicarboxamide core has been reported. It exhibits a volume-conserving conformational change upon excitation, making it a promising candidate for embedding in confined environments. In order to rationally implement and efficiently utilize the azodicarboxamide molecular switch, detailed insight into the coordinates governing the excited-state dynamics is needed. Here, we report a detailed comparative picture of the molecular motion at the atomic level in the presence and absence of explicit solvent. Our hybrid quantum mechanics/molecular mechanics (QM/MM) excited state simulations reveal that, although the energy landscape is slightly modulated by the solvation, the light-induced motion is dominated by a bending-assisted pedalo-type motion independent of the solvation. To support the predicted mechanism, we simulate time-resolved IR spectroscopy from first principles, thereby resolving fingerprints of the light-induced switching process. Our calculated time-resolved data are in good agreement with previously reported measured spectra. [ABSTRACT FROM AUTHOR]

The nature of the blue color in the iodine-starch reaction is still a matter of debate. Some textbooks still invoke charge-transfer bands within a chain of neutral I2 molecules inside the hydrophobic channel defined by the interior of the amylose helical structure. However, the consensus is that the interior of the helix is not altogether hydrophobic—and that a mixture of I2 molecules and iodide anions reside there and are responsible for the intense charge-transfer bands that yield the blue color of the "iodine-starch complex". Indeed, iodide is a prerequisite of the reaction. However, some debate still exists regarding the nature of the iodine-iodine units inside the amylose helix. Species such as I3-, I5-, I7- etc. have been invoked. Here, we report UV-vis titration data and computational simulations using density functional theory (DFT) for the iodine/iodide chains as well as semiempirical (AM1, PM3) calculations of the amylose-iodine/iodide complexes, that (1) confirm that iodide is a pre-requisite for blue color formation in the iodine-starch system, (2) propose the nature of the complex to involve alternating sets of I2 and Ix- units, and (3) identify the nature of the charge-transfer bands as involving transfer from the Ix- σ* orbitals (HOMO) to I2 σ* LUMO orbitals. The best candidate for the "blue complex", based on DFT geometry optimizations and TD-DFT spectral simulations, is an I2-I5-I2 unit, which is expected to occur in a repetitive manner inside the amylose helix. [ABSTRACT FROM AUTHOR]

Complexes consisting of earth-abundant main group metals such as silicon with polypyridine ligands are of interest for a variety of optical and electronic applications including as electrochromic colorants. Previous spectroelectrochemical studies with tris(2,2′-bipyridyl)silicon(IV) hexafluorophosphate, [Si(bpy)3](PF6)4, demonstrated an ability to control the color saturation of the potential electrochromic dye, with the intensity of the dye's green color increasing as the charge state sequentially reduces from 4+ to 1+. In this study, the synthesis of bis(4′-(4-tolyl)-2,2′:6′,2″-terpyridine)silicon(IV) hexafluorophosphate, [Si(ttpy)2](PF6)4, is reported along with electrochemical and spectroelectrochemical analyses. Computational modeling (density functional theory) is used to further elucidate the electrochromic properties of previously reported Si(bpy)3n+ species and the new Si(ttpy)2n+ species. While the homoleptic tris(bidentate)silicon(IV) complexes are attractive as electrochromic dyes for tunable color saturation, the bis(tridentate)silicon(IV) complexes are attractive as polychromatic electrochromic dyes. [ABSTRACT FROM AUTHOR]

A series of neutral acridine-based gold(III)-NHC complexes containing the pentafluorophenyl (–C6F5) group were synthesized. All of the complexes were fully characterized by analytical techniques. The square planar geometry around the gold center was confirmed by X-ray diffraction analysis for complexes 1 (Trichloro [1-methyl-3-(9-acridine)imidazol-2-ylidene]gold(III)) and 2 (Chloro-bis(pentafluorophenyl)[1-methyl-3-(9-acridine)imidazol-2-ylidene]gold(III)). In both cases, the acridine rings play a key role in the crystal packing of the solid structures by mean of π–π stacking interactions, with centroid–centroid and interplanar distances being similar to those found in other previously reported acridine-based Au(I)-NHC complexes. A different reactivity when using a bulkier N-heterocyclic carbene ligand such as 1,3-bis-(2,6-diisopropylphenyl)-2-imidazolidinylidene (SIPr) was observed. While the use of the acridine-based NHC ligand led to the expected organometallic gold(III) species, the steric hindrance of the bulky SIPr ligand led to the formation of the corresponding imidazolinium cation stabilized by the tetrakis(pentafluorophenyl)aurate(III) [Au(C6F5)4]− anion. Computational experiments were carried out in order to figure out the ground state electronic structure and the binding formation energy of the complexes and, therefore, to explain the observed reactivity. [ABSTRACT FROM AUTHOR]

The structures of Ag complexes with dimethyl amino phenyl substituted phthalocyanine m[dmaphPcAg]q of various charges q and in the two lowest spin states m were optimized using the B3LYP method within the D4h symmetry group and its subgroups. The most stable reaction intermediate in the supposed photoinitiation reaction is 3[dmaphPcAg]−. Group-theoretical analysis of the optimized structures and of their electron states reveals two symmetry-descent mechanisms. The stable structures of maximal symmetry of complexes 1[dmaphPcAg]+, 3[dmaphPcAg]+, 2[dmaphPcAg]0, and 4[dmaphPcAg]2− correspond to the D4 group as a consequence of the pseudo-Jahn–Teller effect within unstable D4h structure. Complexes 4[dmaphPcAg]0, 1[dmaphPcAg]−, 3[dmaphPcAg]−, and 2[dmaphPcAg]2− with double degenerate electron ground states in D4h symmetry structures undergo a symmetry descent to stable structures corresponding to maximal D2 symmetry, not because of a simple Jahn–Teller effect but due to a hidden pseudo-Jahn–Teller effect (strong vibronic interaction between excited electron states). The reduction of the neutral photoinitiator causes symmetry descent to its anionic intermediate because of vibronic interactions that must significantly affect the polymerization reactions.

Highly unsaturated chain molecules are interesting due to their potential application as nanowires and occurrence in interstellar space. Here, we focus on predicting the electronic spectra of polyynic nitriles HC2m+1N (m = 0–13) and dinitriles NC2n+2N (n = 0–14). The results of time-dependent density functional theory (TD-DFT) calculations are compared with the available gas-phase and noble gas matrix experimental data. We assessed the performance of fifteen functionals and five basis sets for reproducing (i) vibrationless electronic excitation energies and (ii) vibrational frequencies in the singlet excited states. We found that the basis sets of at least triple-ζ quality were necessary to describe the long molecules with alternate single and triple bonds. Vibrational frequency scaling factors are similar for the ground and excited states. The benchmarked spectroscopic parameters were shown to be acceptably reproduced with adequately chosen functionals, in particular ωB97X, CAM-B3LYP, B3LYP, B971, and B972. Select functionals were applied to study the electronic excitation of molecules up to HC27N and C30N2. It is demonstrated that optical excitation leads to a shift from the polyyne- to a cumulene-like electronic structure. [ABSTRACT FROM AUTHOR]

The photophysical properties of Cu(II) complexes with 5,10,15,20-meso-tetrakis(phenyl)porphyrin and 5,10,15,20-meso-tetrakis(N-methylpyridium-4-yl)porphyrin are examined via the luminescence and femtosecond time-resolved absorbance methods, respectively. These studies are supported by DFT and TD-DFT calculations, which highlight the important role played by ligand-to-metal charge-transfer states in directing the system toward either intersystem crossing to the triplet hypersurface or coordinative expansion to a five-coordinate quasi-stable intermediate. The latter processes occur when the porphyrin is photolyzed in the presence of suitably located Lewis bases. Femtosecond time-resolved absorbance measurements of Cu(II)-5,10,15,20-meso-tetrakis(N-methylpyridium-4-yl)porphyrin confirm that the coordinative expansion in water occurs in approximately 700 fs, while crossing to the triplet hypersurface takes approximately 140 fs in the same solvent. These processes are mutually exclusive, although both can occur simultaneously depending on the environment of the porphyrin. The ratio of the two processes depends on the relative orientation of the Lewis base with respect to the copper atom at the time of excitation. As a consequence, copper porphyrins such as these are excellent probes in the environment of the porphyrin and can be used to identify the location of the porphyrin when interacting with DNA fragments.

We report a simple and efficient strategy to enhance the fluorescence of biocompatible biindole diketonates (bdks) in the visible spectrum through difluoroboronation (BF2bdks complexes). Emission spectroscopy testifies an increase in the fluorescence quantum yields from a few percent to as much as >0.7. This massive increment is essentially independent of substitutions at the indole (-H, -Cl, and -OCH3) and corresponds to a significant stabilization of the excited state with respect to non-radiative decay mechanisms: the non-radiative decay rates are reduced by as much as an order of magnitude, from 109 s−1 to 108 s−1, upon difluoroboronation. The stabilization of the excited state is large enough to enable sizeable 1O2 photosensitized production. Different time-dependent (TD) density functional theory (DFT) methods were assessed in their ability to model the electronic properties of the compounds, with TD-B3LYP-D3 providing the most accurate excitation energies. The calculations associate the first active optical transition in both the bdks and BF2bdks electronic spectra to the S0 → S1 transition, corresponding to a shift in the electronic density from the indoles to the oxygens or the O-BF2-O unit, respectively.

A series of multistep synthesis protocols was adopted to synthesize substituted imidazopyridines (IMPs) (SM-IMP-01 to SM-IMP-13, and DA-01-05). All substituted IMPs were then characterized using standard spectroscopic techniques such as 1H-NMR, 13C-NMR, elemental analyses, and mass spectrometry. Our both in vitro qualitative and quantitative results for antibacterial analysis, against Klebsiella pneumoniae ATCC 4352 and Bacillus subtilis ATCC 6051 suggested that all compounds essentially exhibited activity against selected strains of bacteria. Our DFT analyses suggested that the compounds of the SM-IMP-01–SM-IMP-13 series have HOMO/LUMO gaps within 4.43–4.69 eV, whereas the compounds of the DA-01–DA-05 series have smaller values of the HOMO/LUMO gaps, 3.24–4.17 eV. The lowest value of the global hardness and the highest value of the global softness, 2.215 and 0.226 eV, respectively, characterize the compound SM-IMP-02; thus, it is the most reactive compound in the imidazopyridine carboxamide series (except hydrazide series). This compound also depicted lesser MIC values against Klebsiella pneumoniae ATCC 4352 and Bacillus subtilis ATCC 6051 as 4.8 µg/mL, each. In terms of another series, hydrazide DA-05 depicted strong antimicrobial actions (MIC: 4.8 µg/mL against both bacterial strains) and also had the lowest energy gap (3.24 eV), higher softness (0.309 eV), and lesser hardness (1.62 eV). Overall, when we compare qualitative and quantitative antimicrobial results, it is been very clear that compounds with dibromo substitutions on imidazopyridine (IMP) rings would act as better antimicrobial agents than those with -H at the eighth position on the IMP ring. Furthermore, substituents of higher electronegativities would tend to enhance the biological activities of dibromo-IMP compounds. DFT properties were also well comparable to this trend and overall, we can say that the electronic behavior of compounds under investigation has key roles in their bioactivities.

With an appropriate mixture of cyclometalating and ancillary ligands, based on simple structures (commercial or easily synthesized), it has been possible to design a family of eight new Ir(III) complexes (1A, 1B, 2B, 2C, 3B, 3C, 3D and 3E) useful as luminescent materials in LEC devices. These complexes involved the use of phenylpyridines or fluorophenylpyridines as cyclometalating ligands and bipyridine or phenanthroline-type structures as ancillary ligands. The emitting properties have been evaluated from a theoretical approach through Density Functional Theory and Time-Dependent Density Functional Theory calculations, determining geometric parameters, frontier orbital energies, absorption and emission energies, injection and transport parameters of holes and electrons, and parameters associated with the radiative and non-radiative decays. With these complexes it was possible to obtain a wide range of emission colours, from deep red to blue (701–440 nm). Considering all the calculated parameters between all the complexes, it was identified that 1B was the best red, 2B was the best green, and 3D was the best blue emitter. Thus, with the mixture of these complexes, a dual host–guest system with 3D-1B and an RGB (red–green–blue) system with 3D-2B-1B are proposed, to produce white LECs. [ABSTRACT FROM AUTHOR]

A reaction of a cyclic trinuclear copper(I) or silver(I) pyrazolate complex ([MPz]3, M = Cu, Ag) with 1,1′-dimethyl-2,2’-bibenzimidazole (L) leads to the formation of tetranuclear adducts decorated by one or two molecules of a diimine ligand, depending on the amount of the ligand added (0.75 or 1.5 equivalents). The coordination of two L molecules stabilizes the formation of a practically idealized tetrahedral four-metal core in the case of a copper-containing complex and a distorted tetrahedron in the case of a Ag analog. In contrast, complexes containing one molecule of diimine possess two types of metals, two- and three-coordinated, forming the significantly distorted central M4 cores. The diimine ligands are twisted in these complexes with dihedral angles of ca. 50–60°. A TD-DFT analysis demonstrated the preference of a triplet state for the twisted 1,1′-dimethyl-2,2’-bibenzimidazole and a singlet state for the planar geometry. All obtained complexes demonstrated, in a solution, the blue fluorescence of the ligand-centered (LC) nature typical for free diimine. In contrast, a temperature decrease to 77 K stabilized the structure close to that observed in the solid state and activated the triplet states, leading to green phosphorescence at ca. 500 nm. The silver-containing complex Ag4Pz4L exhibited dual emission from both the singlet and triplet states, even at room temperature.

Molecular switches which can be triggered by light to interconvert between two or more well-defined conformation differing in their chemical or physical properties are fundamental for the development of materials with on-demand functionalities. Recently, a novel molecular switch based on a the azodicarboxamide core has been reported. It exhibits a volume-conserving conformational change upon excitation, making it a promising candidate for embedding in confined environments. In order to rationally implement and efficiently utilize the azodicarboxamide molecular switch, detailed insight into the coordinates governing the excited-state dynamics is needed. Here, we report a detailed comparative picture of the molecular motion at the atomic level in the presence and absence of explicit solvent. Our hybrid quantum mechanics/molecular mechanics (QM/MM) excited state simulations reveal that, although the energy landscape is slightly modulated by the solvation, the light-induced motion is dominated by a bending-assisted pedalo-type motion independent of the solvation. To support the predicted mechanism, we simulate time-resolved IR spectroscopy from first principles, thereby resolving fingerprints of the light-induced switching process. Our calculated time-resolved data are in good agreement with previously reported measured spectra.

Complexes consisting of earth-abundant main group metals such as silicon with polypyridine ligands are of interest for a variety of optical and electronic applications including as electrochromic colorants. Previous spectroelectrochemical studies with tris(2,2′-bipyridyl)silicon(IV) hexafluorophosphate, [Si(bpy)3](PF6)4, demonstrated an ability to control the color saturation of the potential electrochromic dye, with the intensity of the dye’s green color increasing as the charge state sequentially reduces from 4+ to 1+. In this study, the synthesis of bis(4′-(4-tolyl)-2,2′:6′,2″-terpyridine)silicon(IV) hexafluorophosphate, [Si(ttpy)2](PF6)4, is reported along with electrochemical and spectroelectrochemical analyses. Computational modeling (density functional theory) is used to further elucidate the electrochromic properties of previously reported Si(bpy)3n+ species and the new Si(ttpy)2n+ species. While the homoleptic tris(bidentate)silicon(IV) complexes are attractive as electrochromic dyes for tunable color saturation, the bis(tridentate)silicon(IV) complexes are attractive as polychromatic electrochromic dyes.

A series of neutral acridine-based gold(III)-NHC complexes containing the pentafluorophenyl (–C6F5) group were synthesized. All of the complexes were fully characterized by analytical techniques. The square planar geometry around the gold center was confirmed by X-ray diffraction analysis for complexes 1 (Trichloro [1-methyl-3-(9-acridine)imidazol-2-ylidene]gold(III)) and 2 (Chloro-bis(pentafluorophenyl)[1-methyl-3-(9-acridine)imidazol-2-ylidene]gold(III)). In both cases, the acridine rings play a key role in the crystal packing of the solid structures by mean of π–π stacking interactions, with centroid–centroid and interplanar distances being similar to those found in other previously reported acridine-based Au(I)-NHC complexes. A different reactivity when using a bulkier N-heterocyclic carbene ligand such as 1,3-bis-(2,6-diisopropylphenyl)-2-imidazolidinylidene (SIPr) was observed. While the use of the acridine-based NHC ligand led to the expected organometallic gold(III) species, the steric hindrance of the bulky SIPr ligand led to the formation of the corresponding imidazolinium cation stabilized by the tetrakis(pentafluorophenyl)aurate(III) [Au(C6F5)4]− anion. Computational experiments were carried out in order to figure out the ground state electronic structure and the binding formation energy of the complexes and, therefore, to explain the observed reactivity.

Highly unsaturated chain molecules are interesting due to their potential application as nanowires and occurrence in interstellar space. Here, we focus on predicting the electronic spectra of polyynic nitriles HC2m+1N (m = 0–13) and dinitriles NC2n+2N (n = 0–14). The results of time-dependent density functional theory (TD-DFT) calculations are compared with the available gas-phase and noble gas matrix experimental data. We assessed the performance of fifteen functionals and five basis sets for reproducing (i) vibrationless electronic excitation energies and (ii) vibrational frequencies in the singlet excited states. We found that the basis sets of at least triple-ζ quality were necessary to describe the long molecules with alternate single and triple bonds. Vibrational frequency scaling factors are similar for the ground and excited states. The benchmarked spectroscopic parameters were shown to be acceptably reproduced with adequately chosen functionals, in particular ωB97X, CAM-B3LYP, B3LYP, B971, and B972. Select functionals were applied to study the electronic excitation of molecules up to HC27N and C30N2. It is demonstrated that optical excitation leads to a shift from the polyyne- to a cumulene-like electronic structure.

With an appropriate mixture of cyclometalating and ancillary ligands, based on simple structures (commercial or easily synthesized), it has been possible to design a family of eight new Ir(III) complexes (1A, 1B, 2B, 2C, 3B, 3C, 3D and 3E) useful as luminescent materials in LEC devices. These complexes involved the use of phenylpyridines or fluorophenylpyridines as cyclometalating ligands and bipyridine or phenanthroline-type structures as ancillary ligands. The emitting properties have been evaluated from a theoretical approach through Density Functional Theory and Time-Dependent Density Functional Theory calculations, determining geometric parameters, frontier orbital energies, absorption and emission energies, injection and transport parameters of holes and electrons, and parameters associated with the radiative and non-radiative decays. With these complexes it was possible to obtain a wide range of emission colours, from deep red to blue (701–440 nm). Considering all the calculated parameters between all the complexes, it was identified that 1B was the best red, 2B was the best green, and 3D was the best blue emitter. Thus, with the mixture of these complexes, a dual host–guest system with 3D-1B and an RGB (red–green–blue) system with 3D-2B-1B are proposed, to produce white LECs.

The reaction of PtCl2 with s-triazine-type ligand (HTriaz) (1:1) in acetone under heating afforded a new [Pt(Triaz)Cl] complex. Single-crystal X-ray diffraction analysis showed that the ligand (HTriaz) is an NNO tridentate chelate via two N-atoms from the s-triazine and hydrazone moieties and one oxygen from the deprotonated phenolic OH. The coordination environment of the Pt(II) is completed by one Cl−1 ion trans to the Pt-N(hydrazone). Hirshfeld surface analysis showed that the most dominant interactions are the H···H, H···C and O···H intermolecular contacts. These interactions contributed by 60.9, 11.2 and 8.3% from the whole fingerprint area, respectively. Other minor contributions from the Cl···H, C···N, N···H and C···C contacts were also detected. Among these interactions, the most significant contacts are the O···H, H···C and H···H interactions. The amounts of the electron transfer from the ligand groups to Pt(II) metal center were predicted using NBO calculations. Additionally, the electronic spectra were assigned based on the TD-DFT calculations.

The synthesis and characterization of A3B-type phthalocyanines, ZnPc1–4, bearing bulky 2,6-diisopropylphenoxy-groups or chlorine atoms on isoindoline units “A” and either one or two carboxylic anchors on isoindoline unit “B” are reported. A comparison of molecular modelling with the conventional time dependent—density functional theory (TD-DFT) approach and its simplified sTD-DFT approximation provides further evidence that the latter method accurately reproduces the key trends in the spectral properties, providing colossal savings in computer time for quite large molecules. This demonstrates that it is a valuable tool for guiding the rational design of new phthalocyanines for practical applications.

This study presents an extensive analysis of the predictive power of time-dependent density functional theory in determining the excited-state properties of two groups of important fluorescent dyes, difluoroboranes and hydroxyphenylimidazo[1,2-a]pyridine derivatives. To ensure statistically meaningful results, the data set is comprised of 85 molecules manifesting diverse photophysical properties. The vertical excitation energies and dipole moments (in the electronic ground and excited states) of the aforementioned dyes were determined using the RI-CC2 method (reference) and with 18 density functional approximations (DFA). The set encompasses DFAs with varying amounts of exact exchange energy (EEX): from 0% (e.g., SVWN, BLYP), through a medium (e.g., TPSSh, B3LYP), up to a major contribution of EEX (e.g., BMK, MN15). It also includes range-separated hybrids (CAM-B3LYP, LC-BLYP). Similar error profiles of vertical energy were obtained for both dye groups, although the errors related to hydroxyphenylimidazopiridines are significantly larger. Overall, functionals including 40–55% of EEX (SOGGA11-X, BMK, M06-2X) ensure satisfactory agreement with the reference vertical excitation energies obtained using the RI-CC2 method; however, MN15 significantly outperforms them, providing a mean absolute error of merely 0.04 eV together with a very high correlation coefficient (R2 = 0.98). Within the investigated set of functionals, there is no single functional that would equally accurately determine ground- and excited-state dipole moments of difluoroboranes and hydroxyphenylimidazopiridine derivatives. Depending on the chosen set of dyes, the most accurate μGS predictions were delivered by MN15 incorporating a major EEX contribution (difluoroboranes) and by PBE0 containing a minor EEX fraction (hydroxyphenylimidazopiridines). Reverse trends are observed for μES, i.e., for difluoroboranes the best results were obtained with functionals including a minor fraction of EEX, specifically PBE0, while in the case of hydroxyphenylimidazopiridines, much more accurate predictions were provided by functionals incorporating a major EEX contribution (BMK, MN15).

A series of emissive Cu(I) cationic complexes with 3-(2-pyridyl)-5-phenyl-pyrazole and various phosphines: dppbz (1), Xantphos (2), DPEPhos (3), PPh3 (4), and BINAP (5) were designed and characterized. Complexes obtained exhibit bright yellow-green emission (ca. 520–650 nm) in the solid state with a wide range of QYs (1–78%) and lifetimes (19–119 µs) at 298 K. The photoluminescence efficiency dramatically depends on the phosphine ligand type. The theoretical calculations of buried volumes and excited states explained the emission behavior for 1–5 as well as their lifetimes. The bulky and rigid phosphines promote emission efficiency through the stabilization of singlet and triplet excited states.

In this work, we investigate by ab initio calculations and optical experiments the sensitivity of graphene quantum dots in their use as devices to measure the presence, and concentration, of heavy metals in water. We demonstrate that the quenching or enhancement in the optical response (absorption, emission) depends on the metallic ion considered. In particular, two cases of opposite behaviour are considered in detail: Cd2+, where we observe an increase in the emission optical response for increasing concentration, and Pb2+ whose emission spectra, vice versa, are quenched along the concentration rise. The experimental trends reported comply nicely with the different hydration patterns suggested by the models that are also capable of reproducing the minor quenching/enhancing effects observed in other ions. We envisage that quantum dots of graphene may be routinely used as cheap detectors to measure the degree of poisoning ions in water.

The fluorescent base guanine analog, 8-vinyl-deoxyguanosine (8vdG), is studied in solution using a combination of optical spectroscopies, notably femtosecond fluorescence upconversion and quantum chemical calculations, based on time-dependent density functional theory (TD-DFT) and including solvent effect by using a mixed discrete-continuum model. In all investigated solvents, the fluorescence is very long lived (3−4 ns), emanating from a stable excited state minimum with pronounced intramolecular charge-transfer character. The main non-radiative decay channel features a sizeable energy barrier and it is affected by the polarity and the H-bonding properties of the solvent. Calculations provide a picture of dynamical solvation effects fully consistent with the experimental results and show that the photophysical properties of 8vdG are modulated by the orientation of the vinyl group with respect to the purine ring, which in turn depends on the solvent. These findings may have importance for the understanding of the fluorescence properties of 8vdG when incorporated in a DNA helix.

In this paper we describe the mechanism of light emission through thermally activated delayed fluorescence (TADF)—a process able to ideally achieve 100% quantum efficiencies upon fully harvesting the energy of triplet excitons, and thus minimizing the energy loss of common (i.e., fluorescence and phosphorescence) luminescence processes. If successful, this technology could be exploited for the manufacture of more efficient organic light-emitting diodes (OLEDs) made of only light elements for multiple daily applications, thus contributing to the rise of a sustainable electronic industry and energy savings worldwide. Computational and theoretical studies have fostered the design of these all-organic molecular emitters by disclosing helpful structure−property relationships and/or analyzing the physical origin of this mechanism. However, as the field advances further, some limitations have also appeared, particularly affecting TD-DFT calculations, which have prompted the use of a variety of methods at the molecular scale in recent years. Herein we try to provide a guide for beginners, after summarizing the current state-of-the-art of the most employed theoretical methods focusing on the singlet−triplet energy difference, with the additional aim of motivating complementary studies revealing the stronger and weaker aspects of computational modelling for this cutting-edge technology.

The comprehensive characterization of Intramolecular Charge Transfer (ICT) stemming in push-pull molecules with a delocalized π-system of electrons is noteworthy for a bespoke design of organic materials, spanning widespread applications from photovoltaics to nanomedicine imaging devices. Photo-induced ICT is characterized by structural reorganizations, which allows the molecule to adapt to the new electronic density distribution. Herein, we discuss recent photophysical advances combined with recent progresses in the computational chemistry of photoactive molecular ensembles. We focus the discussion on femtosecond Transient Absorption Spectroscopy (TAS) enabling us to follow the transition from a Locally Excited (LE) state to the ICT and to understand how the environment polarity influences radiative and non-radiative decay mechanisms. In many cases, the charge transfer transition is accompanied by structural rearrangements, such as the twisting or molecule planarization. The possibility of an accurate prediction of the charge-transfer occurring in complex molecules and molecular materials represents an enormous advantage in guiding new molecular and materials design. We briefly report on recent advances in ultrafast multidimensional spectroscopy, in particular, Two-Dimensional Electronic Spectroscopy (2DES), in unraveling the ICT nature of push-pull molecular systems. A theoretical description at the atomistic level of photo-induced molecular transitions can predict with reasonable accuracy the properties of photoactive molecules. In this framework, the review includes a discussion on the advances from simulation and modeling, which have provided, over the years, significant information on photoexcitation, emission, charge-transport, and decay pathways. Density Functional Theory (DFT) coupled with the Time-Dependent (TD) framework can describe electronic properties and dynamics for a limited system size. More recently, Machine Learning (ML) or deep learning approaches, as well as free-energy simulations containing excited state potentials, can speed up the calculations with transferable accuracy to more complex molecules with extended system size. A perspective on combining ultrafast spectroscopy with molecular simulations is foreseen for optimizing the design of photoactive compounds with tunable properties.

A deactivation channel for laser-excited 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) was studied by semiclassical dynamics. Results indicate that the excited state resulting from an electronic transition from the highest occupied molecular orbital (HOMO) to the lowest unoccupied molecular mrbital (LUMO) is deactivated via pyramidalization of the activated N atom in a nitro group, with a lifetime of 2.4 ps. An approximately 0.5-electron transfer from the aromatic ring to the activated nitro group led to a significant increase of the C–NO2 bond length, which suggests that C–NO2 bond breaking could be a trigger for an explosive reaction. The time-dependent density functional theory (TD-DFT) method was used to calculate the energies of the ground and S1 excited states for each configuration in the simulated trajectory. The S1 S0 energy gap at the instance of non-adiabatic decay was found to be 0.096 eV, suggesting that the decay geometry is close to the conical intersection. [ABSTRACT FROM AUTHOR]

A series of eight carbazole-cyanoacrylate based donor-acceptor dyes were studied. Within the series the influence of modifying the thiophene bridge, linking donor and acceptor and a change in the nature of the acceptor, from acid to ester, was explored. In this joint experimental and computational study we have used electronic absorbance and emission spectroscopies, Raman spectroscopy and computational modeling (density functional theory). From these studies it was found that extending the bridge length allowed the lowest energy transition to be systematically red shifted by 0.12 eV, allowing for limited tuning of the absorption of dyes using this structural motif. Using the aforementioned techniques we demonstrate that this transition is charge transfer in nature. Furthermore, the extent of charge transfer between donor and acceptor decreases with increasing bridge length and the bridge plays a smaller role in electronically mixing with the acceptor as it is extended. [ABSTRACT FROM AUTHOR]

The anti-inflammatory drug predinisolone (1) was reduced to 20β-hydroxyprednisolone (2) by the marine endophytic fungus Penicilium lapidosum isolated from an alga. The structural elucidation of 2 was achieved by 1D- and 2D-NMR, MS, IR data. Although, 2 is a known compound previously obtained through microbial transformation, the data provided failed to prove the C20 stereochemistry. To solve this issue, DFT and TD-DFT calculations have been carried out at the B3LYP/6–31+G (d,p) level of theory in gas and solvent phase. The absolute configuration of C20 was eventually assigned by combining experimental and calculated electronic circular dichroism spectra and 3JHH chemical coupling constants.

The structural stability and photoabsorption properties of Ni(II)-based metal-organic complexes with octahedral coordination having different planar ligand ring structures were investigated employing density functional theory (DFT) and its time-dependent extension (TD-DFT) considering the M06 exchange-correlation functional and the Def2-TZVP basis set. The results showed that the molecular composition of different planar cyclic ligand structures had significant influences on the structural stability and photoabsorption properties of metal-organic complexes. Only those planar ligands that contained aromatic rings met the basic criteria (thermal stability, structural reversibility, and appropriate excitation frequency domain) for light-induced excited spin state trapping, but their spin transition efficiencies were very different. While, in all three aromatic cases, the singlet electronic excitations induced charge distribution that could help in the singlet-to-triplet spin transition, and triplet excitations, which could assist in the backward (triplet-to-singlet) spin transition, was found only for one complex.