Search

Riboflavin (RF) was considered to be possessed of photoactivity to generate reactive oxygen species (ROS) under ultraviolet (UV) light, which is thought to be a favorable antibacterial candidate. Herein, RF was incorporated into chitosan (CS) coatings and treated under UV with different exposure times (2, 4, and 6 h) to improve the physicochemical and antibacterial properties. The results showed that the light transmittance and antibacterial performance of chitosan coatings gradually increased with the extension of the UV irradiation time. The antibacterial ability of chitosan coatings correlated with the generation of ROS: ∙OH and H2O2, which achieved 1549.08 and 95.48 μg/g, respectively, after 6 h irradiation. Furthermore, the chitosan coatings with UV irradiation also reduced the pH value, total volatile basic nitrogen (TVB-N), ΔE, and total viable counts (TVC) and improved sensory attributes of pork. In conclusion, the UV irradiated chitosan coatings could be used as an environmentally friendly antimicrobial packaging material to effectively delay the spoilage of pork, maintain its sensory quality and prolong its shelf life. [ABSTRACT FROM AUTHOR]

In this work, the modification process of poly(lactic acid) (PLA) with metal-based nanoparticle (NPs) additives (Ag, ZnO, TiO2) at different loading (0.5, 1.0, and 2.5 wt%) and by melt-mix extrusion method followed by film formation as one of the advantageous techniques for industrial application have been investigated. PLA nanoparticle composite films (PLA-NPs) of PLA-Ag, PLA-ZnO, PLA-TiO2 were fabricated, allowing convenient dispersion of NPs within the PLA matrix to further pursue the challenge of investigating the surface properties of PLA-NPs reinforced plastics (as films) for the final functional properties, such as antimicrobial activity and surface mechanical properties. The main objective was to clarify how the addition of NPs to the PLA during the melt extrusion process affects the chemistry, morphology, and wettability of the surface and its further influence on the antibacterial efficiency and mechanical properties of the PLA-NPs. Therefore, the effect of Ag, ZnO, and TiO2 NPs incorporation on the morphology (SEM), elemental mapping analysis (SEM-EDX), roughness, surface free energy (SFE) of PLA-NPs measured by goniometry and calculated by OWRK (Owens, Wendt, Rabel, and Kaelble) model was evaluated and correlated with the final functional properties such as antimicrobial activity and surface mechanical properties. The developed PLA-metal-based nanocomposites, with improved mechanical and antimicrobial surface properties, could be used as sustainable and biodegradable materials, offering desirable multifunctionalities not only for food packaging but also for cosmetics and hygiene products, as well as for broader plastic products where antimicrobial activity is desirable. [ABSTRACT FROM AUTHOR]

In the present study, supercritical solvent impregnation (SSI) has been applied to incorporate thymol into bio-composite polymers as a potential active packaging material. Thymol, a natural component with a proven antimicrobial activity, was successfully impregnated into starch-chitosan (SC) and starch-chitosan-zeolite (SCZ) films using supercritical carbon dioxide (scCO2) as a solvent. Experiments were performed at 35 °C, pressures of 15.5 and 30 MPa, and an impregnation time in the range of 4–24 h. The highest impregnation yields of SC films with starch to chitosan mass ratios of 1:1 and 1:2 were 10.80% and 6.48%, respectively. The addition of natural zeolite (15–60%) significantly increased the loading capacity of films enabling thymol incorporation in a quantity of 16.7–27.3%. FTIR and SEM analyses were applied for the characterization of the films. Mechanical properties and water vapor permeability of films before and after the impregnation were tested as well. Thymol release kinetics in deionized water was followed and modeled by the Korsmeyer-Peppas and Weibull model. SCZ films with thymol loading of approximately 24% exhibited strong antibacterial activity against E. coli and methicillin-resistant Staphylococcus (S.) aureus (MRSA). [ABSTRACT FROM AUTHOR]