Search

In this article, for the first time, TG-DSC and TG-FTIR investigations of potential pharmaceutics, i.e., analgesic and anticancer active annelated triazinones (1–9) have been presented. The thermal behaviour of these molecules was established in oxidative and inert conditions. The solid–liquid phase transition for each compound (1–9) was documented by one sharp DSC peak confirming the high purity of each sample studied. All the molecules were characterised in terms of calorimetric changes and mass changes during their heating. They revealed high thermal stability in oxidative and inert conditions. The observed tendency in thermal stability changes in relation to a substituent present at the phenyl moiety was found to be similar in air and nitrogen. It was confirmed that annelated triazinones 1–9 were stable up to a temperature range of 241–296 °C in air, and their decomposition process proceeded in two stages under oxidative conditions. In addition, it was established that their thermal stability in air decreased in the following order of R at the phenyl moiety: 4-Cl > 3,4-Cl2 > H > 3-Cl > 4-CH3 > 2-CH3 > 3-CH3 > 2-Cl > 2-OCH3. The volatile decomposition products of the investigated molecules were proposed by comparing the FTIR spectra collected during their thermogravimetric analysis in nitrogen with the spectra from the database of reference compounds. None of annelated triazinones 1–9 underwent any polymorphic transformation during thermal studies. All the compounds proved to be safe for erythrocytes. In turn, molecules 3, 6, and 9 protected red blood cells from oxidative damage, and therefore may be helpful in the prevention of free radical-mediated diseases. [ABSTRACT FROM AUTHOR]

The present study aimed at utilizing technically hydrolyzed lignin (THL), industrial biomass residue, derived in high-temperature diluted sulfuric acid hydrolysis of softwood and hardwood chips to sugars. The THL was carbonized in a horizontal tube furnace at atmospheric pressure, in inert atmosphere and at three different temperatures (500, 600, and 700 °C). Biochar chemical composition was investigated along with its HHV, thermal stability (thermogravimetric analysis), and textural properties. Surface area and pore volume were measured with nitrogen physisorption analysis often named upon Brunauer–Emmett–Teller (BET). Increasing the carbonization temperature reduced volatile organic compounds (40 ÷ 96 wt. %), increased fixed carbon (2.11 to 3.68 times the wt. % of fixed carbon in THL), ash, and C-content. Moreover, H and O were reduced, while N- and S-content were below the detection limit. This suggested biochar application as solid biofuel. The biochar Fourier-transform infrared (FTIR) spectra revealed that the functional groups were gradually lost, thus forming materials having merely polycyclic aromatic structures and high condensation rate. The biochar obtained at 600 and 700 °C proved having properties typical for microporous adsorbents, suitable for selective adsorption purposes. Based on the latest observations, another biochar application was proposed—as a catalyst. [ABSTRACT FROM AUTHOR]

Reduced imine cage (RCC3) was covalently bonded to the surface of silica spheres, and then the secondary amine group of the molecular cage was embedded in non-polar C10 for modification to prepare a novel RCC3-C10@silica HPLC stationary phase with multiple separation functions. Through infrared spectroscopy, thermogravimetric analysis and nitrogen adsorption–desorption characterization, it was confirmed that RCC3-C10 was successfully bonded to the surface of silica spheres. The resolution of RCC3-C10@silica in reversed-phase separation mode is as high as 2.95, 3.73, 3.27 and 4.09 for p-phenethyl alcohol, 1-phenyl-2-propanol, p-methylphenethyl alcohol and 1-phenyl-1-propanol, indicating that the stationary phase has excellent chiral resolution performance. In reversed-phase and hydrophilic separation modes, RCC3-C10@silica realized the separation and analysis of a total of 70 compounds in 8 classes of Tanaka mixtures, alkylbenzene rings, polyphenyl rings, phenols, anilines, sulfonamides, nucleosides and flavonoids, and the analysis of a variety of chiral and achiral complex mixtures have been completed at the same time. Compared with the traditional C18 commercial column, RCC3-C10@silica exhibits better chromatographic separation selectivity, aromatic selectivity and polar selectivity. The multifunctional separation mechanism exhibited by the stationary phase originates from various synergistic effects such as hydrophobic interaction, π-π interaction, hydrogen bonding and steric interaction provided by RCC3 and C10 groups. This work provides flexible selectivity and application prospects for novel multi-separation functional chromatographic columns. [ABSTRACT FROM AUTHOR]

Hemp (Cannabis sativa L.) processing by-products (hemp cake and hemp seed hulls) were studied for their protein content, extraction of protein isolates (PIs), and their in vitro protein digestibility (IVPD). Crude protein contents of hemp cake and hemp seed hulls were 30.4% and 8.6%, respectively, calculated based on generalized N-to-P conversion factor (N × 5.37). Extraction efficiency of PIs from defatted biomass ranged from 56.0 to 67.7% with alkaline extraction (0.1 M NaOH) followed by isoelectric precipitation (1.0 M HCl). Nitrogen analysis suggested that the total protein contents of PIs extracted using three different alkaline conditions (0.5 M, 0.1 M, and pH 10.0 with NaOH) were >69.7%. The hemp by-product PIs contained all essential amino acids (EAAs) required for fish with leucine, valine, and phenylalanine belonging to the five dominant amino acids. Overall, glutamate was the dominant non-EAA followed by aspartate. Coomassie staining of an SDS-PAGE gel revealed strong presence of the storage protein edestin. High IVPD of >88% was observed for PIs extracted from hemp seeds and by-products when evaluated using a two-phase in vitro gastric/pancreatic protein digestibility assay. PIs extracted from by-products were further tested for their antioxidant activities. The tested PIs showed dose-dependent DPPH radical scavenging activity and possessed strong ORAC values > 650 μM TE/g. [ABSTRACT FROM AUTHOR]

Andrographolide, the principal secondary metabolite of Andrographis paniculata, displays a wide spectrum of medicinal activities. The content of andrographolide varies significantly in the species collected from different geographical regions. Therefore, this study aims at investigating the role of different abiotic factors and selecting suitable sites for the cultivation of A. paniculata with high andrographolide content using a multilayer perceptron artificial neural network (MLP-ANN) approach. A total of 150 accessions of A. paniculata collected from different regions of Odisha and West Bengal in eastern India showed a variation in andrographolide content in the range of 0.28–5.45% on a dry weight basis. The MLP-ANN was trained using climatic factors and soil nutrients as the input layer and the andrographolide content as the output layer. The best topological ANN architecture, consisting of 14 input neurons, 12 hidden neurons, and 1 output neuron, could predict the andrographolide content with 90% accuracy. The developed ANN model showed good predictive performance with a correlation coefficient (R2) of 0.9716 and a root-mean-square error (RMSE) of 0.18. The global sensitivity analysis revealed nitrogen followed by phosphorus and potassium as the predominant input variables influencing the andrographolide content. The andrographolide content could be increased from 3.38% to 4.90% by optimizing these sensitive factors. The result showed that the ANN approach is reliable for the prediction of suitable sites for the optimum andrographolide yield in A. paniculata. [ABSTRACT FROM AUTHOR]

During the process development for multigram-scale synthesis of olmesartan medoxomil (OM), two principal regioisomeric process-related impurities were observed along with the final active pharmaceutical ingredient (API). The impurities were identified as N-1- and N-2-(5-methyl-2-oxo-1,3-dioxolen-4-yl)methyl derivatives of OM. Both compounds, of which N-2 isomer of olmesartan dimedoxomil is a novel impurity of OM, were synthesized and fully characterized by differential scanning calorimetry (DSC), infrared spectroscopy (IR), nuclear magnetic resonance spectroscopy (NMR) and high-resolution mass spectrometry/electrospray ionization (HRMS/ESI). Their 1H, 13C and 15N nuclear magnetic resonance signals were fully assigned. The molecular structures of N-triphenylmethylolmesartan ethyl (N-tritylolmesartan ethyl) and N-tritylolmesartan medoxomil, the key intermediates in OM synthesis, were solved and refined using single-crystal X-ray diffraction (SCXRD). The SCXRD study revealed that N-tritylated intermediates of OM exist exclusively as one of the two possible regioisomers. In molecular structures of these regioisomers, the trityl substituent is attached to the N-2 nitrogen atom of the tetrazole ring, and not to the N-1 nitrogen, as has been widely reported up to the present. This finding indicates that the reported structural formula of N-tritylolmesartan ethyl and N-tritylolmesartan medoxomil, as well as their systematic chemical names, must be revised. The careful analysis of literature spectroscopic data for other sartan intermediates and their analogs with 5-(biphenyl-2-yl)tetrazole moiety showed that they also exist exclusively as N-2-trityl regioisomers. [ABSTRACT FROM AUTHOR]

Over the last several years there has been a huge increase in the development and applications of new efficient organocatalysts for enantioselective pericyclic reactions, which represent one of the most powerful types of organic transformations. Among these processes are cycloaddition reactions (e.g., [3+2]; formal [3+3]; [4+2]; vinylogous [4+2] and 1,3-dipolar cycloadditions), which belong to the most utilized reactions in organic synthesis of complex nitrogen- and oxygen-containing heterocyclic molecules. This review presents the breakthrough realized in this field using chiral BINOL-derived phosphoric acids and N-triflyl phosphoramide organocatalysts. [ABSTRACT FROM AUTHOR]

The application of layered double hydroxide (LDH) nanomaterials as catalysts has attracted great interest due to their unique structural features. It also triggered the need to study their fate and behavior in the aquatic environment. In the present study, Zn-Fe nanolayered double hydroxides (Zn-Fe LDHs) were synthesized using a co-precipitation method and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and nitrogen adsorption-desorption analyses. The toxicity of the home-made Zn-Fe LDHs catalyst was examined by employing a variety of aquatic organisms from different trophic levels, namely the marine photobacterium Vibrio fischeri, the freshwater microalga Pseudokirchneriella subcapitata, the freshwater crustacean Daphnia magna, and the duckweed Spirodela polyrhiza. From the experimental results, it was evident that the acute toxicity of the catalyst depended on the exposure time and type of selected test organism. Zn-Fe LDHs toxicity was also affected by its physical state in suspension, chemical composition, as well as interaction with the bioassay test medium. [ABSTRACT FROM AUTHOR]