Search

There is a lack of published literature on coal deposits in Madagascar. The Imaloto Basin is a sub-basin of the Morondava Basin, Southwestern Madagascar, and hosts the Sakoa Coal Measures. The aim of this study was to increase our understanding of the petrography, geochemistry, and mineralogy of coal deposits hosted in the Imaloto Basin. Three coal seams (from the bottom: Main Seam, Upper Seam, and Top Seam) were intersected during a drilling program conducted by the Lemur Holdings in 2019. Coal samples were characterized using organic petrography (type and rank determination); the ash chemistry was assessed (XRF), and the mineralogy was considered using X-ray diffraction. The depositional environment at the time of peat accumulation was considered. The Main Seam samples are of better quality compared to the Upper Seam and Top Seam samples in terms of calorific value (CV) and ash yield. The coals are borderline Sub-bituminous Low Rank A to Bituminous Medium Rank D. An abundance of inertinite macerals was determined in the Main Seam, while the Upper and Top Seams are more vitrinite-rich. An unusual mineral, possibly albite or analcime, was determined in samples with a high Na content. The Imaloto coal samples show varied depositional settings (dry forest swamp, wet forest swamp, and piedmont plain), which influences coal quality. [ABSTRACT FROM AUTHOR]

The porosity characteristics of coal seams serve as a pivotal factor in assessing the development potential of coalbed methane (CBM) resources, significantly influencing the adsorption and permeability capabilities of coal reservoirs, as well as the accumulation, entrapment, and preservation of CBM. In this study, we focused on the coal seams of the Xishanyao Formation in the western part of the southern Junggar Basin (NW China). By leveraging the complementarity of nuclear magnetic resonance (NMR), low-temperature liquid nitrogen experiments, and high-pressure mercury intrusion porosimetry (MIP) in spatial exploration range and precision, we conducted a comprehensive analysis to achieve a fine description of porosity characteristics. Furthermore, we explored the coal petrology factors controlling the pore characteristics of the Xishanyao Formation, aiming to provide geological evidence for the selection of favorable areas and the development potential evaluation of CBM in the study area. The results indicate the following: (1) The total pore volume of the coal samples is 6.318 × 10−3 cm3/g on average, and the micropore volume accounts for a relatively high proportion (averaging 44.17%), followed by the fine pores (averaging 39.41%). The average porosity is approximately 3.87%, indicating good gas storage and connectivity of the coal seams, albeit with some heterogeneity. The coal reservoir is dominated by micropores and fine pores with diameters less than 100 nm, and the pore structure is characterized by low pore volume and high pore area. (2) The pore structure is influenced by both the coalification degree and the coal maceral. Within the range of low coalification, porosity increases with the increase in coalification degree. Building upon this, an increase in the vitrinite content promotes the development of micropores and fine pores, while an increase in the inertinite content promotes the development of meso–macropores. The clay mineral content exhibits a negative correlation with the adsorption pore volume ratio and a positive correlation with the seepage pore volume ratio. [ABSTRACT FROM AUTHOR]

This study investigated the differences and correlation between the occurrence characteristics of alkali and alkaline earth metals (AAEMs) among different maceral groups in high-alkali, high-inertinite coal, and provides scientific guidance for the co-separation of AAEMs and inertinite groups in Xinjiang coal. The total AAEMs of inertinite-enriched samples were significantly higher than those in raw coals and vitrinite-enriched samples. Five-step sequential extraction showed that Na mainly occurs as water-soluble sodium (Na-Water) in raw coal and inertinite-enriched samples, accounting for about 53% of the total content, while it exists as organic sodium (Na-NH4Cl and Na-EDTA) in vitrinite-enriched samples, accounting for about 52% of the total content. Ca and Mg are both mainly present in organic form (Ca/Mg-NH4Cl and Ca/Mg-EDTA) in all the samples, with slightly higher proportions present in vitrinite-enriched samples. The contents of K are low in all the samples, which exist in an insoluble state (K-I). Combined microscopy and SEM-EDS analyses have revealed that the localized enrichment of Na in raw coal and inertinite-enriched samples occurs in the inertinite cell cavity, which primarily exists as NaHCO3 combined with quartz crystals, with a maximum content of up to 5.85 wt%. In this study, although EDS spectra could not directly characterize organic Ca and Mg, dolomite and calcite minerals were repeatedly found in the inertinite cell cavity. Moreover, the contents of Ca and Mg in the vitrinite-enriched samples were significantly lower than those in the other samples, which suggests that Ca and Mg are enriched with the inertinite groups. The localized enrichment of AAEMs could not be detected in any of the vitrinite-enriched samples. In summary, though there are significant differences between the occurrence modes of AAEMs in different maceral groups of high-alkali coal, AAEMs have a strong affinity with inertinite, which may be due to the inertinite's abundant pore structures. [ABSTRACT FROM AUTHOR]

The comprehensive quality enhancement and grading of coal are crucial methods for unlocking the high value-added and low-carbon utilization of coal resources. In this work, the influence of oily bubbles on the flotation of Shendong Jurassic vitrinite-rich coal and inertinite-rich coal was studied via flotation tests, Fourier transform infrared (FT-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), contact angle detection, and induction time measurements. FT-IR and XPS analyses demonstrated that the surface of inertinite-rich coal contains more hydrophilic oxygen-containing functional groups. Contact angle and induction time measurements showed that the vitrinite-rich coal is more hydrophobic than inertinite-rich coal, and that for both air and oily bubbles, the induction time on the surface of vitrinite-rich coal is shorter than that on the surface of inertinite-rich coal. In addition, rather remarkably, the induction times for both vitrinite-rich coal and inertinite-rich coal are significantly reduced by oily bubbles. Finally, a better flotation performance for oily bubble flotation of vitrinite-rich coal and inertinite-rich coal was found. It appears that oily bubble flotation is an efficient method for enhancing the recovery of vitrinite-rich coal and inertinite-rich coal. [ABSTRACT FROM AUTHOR]

To investigate the influence of organic matter conversion on the evolution of organic matter pores, fractional conversion (TRHI) and loss of TOC (TOCL) from the organic matter conversion of Middle Jurassic Dameigou Formation shale samples were calculated using petrographic analysis. The TRHI of organic matter varies from 0.30 to 0.88 and TOCL content ranges from 0.62% and 4.09%. Relative to samples of Type III organic matter in shales, type II samples exhibit higher TRHI and TOCL values. Petrographic calculations of TRHI reveal that the fractional conversion of different kerogens differs for the same thermal maturity level. The specific surface area (SBET) ranges between 1.25 and 6.63 m2/g and micropore surface area (Smic) ranges between 4.16 and 21.27 m2/g. Correlations between pore structure parameters and TOCL content are higher than those between pore structure parameters and TOC content. The original TOC content decreases with increasing maturity level owing to hydrocarbon generation from organic matter conversion. The development of organic matter pores depends mainly on organic matter conversion, which is influenced by the richness, organic maceral compositions, and thermal maturity of the organic matter. The contents of kaolinite, illite, and mixed-layer illite/smectite (I/S) in the studied shales are 17.83%–37.05%, 5.36%–11.31%, and 5.27%–14.36%, respectively. Pore structure parameters (SBET and Smic) exhibit moderate positive correlations with illite content and I/S content, and moderate negative correlations with kaolinite content, indicating that different clay minerals have differential effects on pore structure. [ABSTRACT FROM AUTHOR]

The Santanghu Basin is a typical low-rank coal-bearing basin in northwest China, with abundant coalbed methane (CBM) resources. However, the understanding of the main controlling factors and reservoir formation models of CBM in low-rank coal is still insufficient, which has restricted the exploration and development of CBM in this region. In this paper, the CBM enrichment controlling factors and enrichment models are analyzed based on the aspects of sedimentary environment, reservoir characteristics, sealing conditions, and hydrogeological conditions after systematically analyzing the geological characteristics of coal measures. The research results indicate that the coal seams of the Xishanyao Formation in the Santanghu Basin are stably developed, with the main macerals being vitrinite and a lower degree of coalification belonging to low-rank coal; the highest content of CBM can reach 7.17 m3/t, and the methane is mainly composed of biogenic gas supplemented by thermogenic gas; the roof lithology of the coal seam is mainly mudstone and siltstone, with good sealing conditions. Finally, two enrichment modes of coalbed methane in slope zones are proposed, namely, the CBM enrichment in the slope zone and the CBM enrichment by fault-hydraulic plugging. The results of this study can serve as a guide for the exploration and development of the deep-buried coalbed methane in the low-rank coal areas. [ABSTRACT FROM AUTHOR]

The Taranaki Basin in New Zealand presents the most promising territory for strategies of hydrocarbon exploration and development. This basin contains multiple source rock levels in its sedimentary successions formed during syn- and post-rift periods. The deepest source rocks, found in the Rakopi Formation, were deposited in deltaic to deep marine environments and consist of gas-prone coal and organic-rich mudstone lithofacies. However, questions remain about the preservation of their organic carbon. This study integrates various organic geochemical analyses (such as Rock Eval pyrolysis, kerogen petrography, and biomarkers) to assess the hydrocarbon potential of the Rakopi coal and mudstone lithofacies. The organic carbon in Rakopi coals and mudstones originated from oxygenated bottom water, but swift burial during the initial rifting phase facilitated the preservation of organic materials. Rakopi coals are less mature than the mudstone facies and contain a mixture of desmocollinite, suberinite, and resinite macerals. In contrast, the mudstone lithofacies are enriched in liptodetrinite. The maceral mixture in the coal led to its elevated hydrogen index and likely facilitated early expulsion of liquid hydrocarbon phases. Regular steranes, diasteranes, and C29 sterane isomers distribution in the coal and mudstone extracts highlighted a greater terrestrial input in the coals, whereas significant marine input is observed in the mudstone extracts. Biomarkers in the coal and mudstone extracts are similar to some nearby oils discoveries in the Taranaki Basin, thereby confirming oil generation from both coal and mudstone lithofacies in the Rakopi Formation. These findings underscore the potential of liptinite-rich coals to generate liquid hydrocarbon phases at marginal oil maturity levels. [ABSTRACT FROM AUTHOR]

The occurrence and separation relationships of Na and maceral groups in Zhundong coals were investigated in this study. The sequential extraction results indicate that the total Na content of all samples decreased with increasing sampling depth, and the level in inertinite-enriched samples (inertinite content 81.0%–84.0%) was significantly higher than that in corresponding raw coals and vitrinite-enriched samples (vitrinite content 90%). Additionally, H2O-Na (soluble salt species) and insoluble Na (acid-insoluble residues) were found to be concentrated in the inertinite-enriched samples. In combined SEM–EDS and microscope observations, local Na enrichments were detected in all raw coal and inertinite-enriched samples except for the vitrinite-enriched samples, but only inertinite-enriched samples were found to generally have over 10 wt% of Na enrichments, all of which occurred as NaCl. Moreover, Na is mostly filled or associated with cell-filling minerals in cells of fusinite. The maceral separation and Na removal of Zhundong coal were simultaneously achieved using triboelectrostatic separation. The vitrinite content in concentrates increased up to 60%, along with a reduced Na level, while the inertinite and sodium levels were both evidently raised in tailings. The obvious positive occurrence and separation correlation between sodium and inertinite offers new insight into, and a technical reference for, the sodium removal and maceral processing of Zhundong coal. [ABSTRACT FROM AUTHOR]

Coal is usually found in many sandstone-hosted uranium deposits in western China. However, it remains unclear whether coal organic matter is related to the mineralization of uranium in sandstone. In this study, the organic matter of coal containing lenticular carbon plant strips and carbon clastics was analyzed in different alteration zones in the Daying sandstone-hosted uranium deposit located in the northern Ordos Basin. According to geological and geochemical characters, Daying sandstone can be classified into three alteration zones: the oxidation zone, the transition zone, and the reduction zone. The results are as follows. Firstly, the maceral organic matter of the coal at Daying is mostly vitrinite, indicating the characters of humic coal. The maturity of the organic matter is low, which is in the transitional evolution stage of immature lignite or lignite-long-flame coal. Secondly, the kerogen is mainly type III (humic type), which can be easily transformed into humic acid with a strong adsorption capacity for uranium. Thirdly, the vitrinite reflectance (Ro) of the coal organic matter in the transition zone is higher than that of the other alteration zones. Meanwhile, there are bright white bands in the microscopic components of the organic matter of the coal in the transition zone (mineralized zone) and a certain composition of the sapropelite has strong fluorescence. All three aforementioned phenomena are related to the radioactivity of uranium, and each of them possesses the potential for application in mineral exploration. Fourthly, the extraction and separation of humic substances indicates that humic acid plays a key role in organic matter-related uranium mineralization. In the transition zone, uranium can co-precipitate as a humate, and the transition zone's organic carbon content increases. Therefore, the organic matter in coal contributes to sandstone-hosted uranium mineralization, providing a further guide to prospecting methodologies. [ABSTRACT FROM AUTHOR]

The aim of this study is to evaluate the thermal maturity of Upper Badenian (Middle Miocene) petroleum source rocks of the Getic Depression, Romania, and to characterize the dispersed organic matter using organic petrography associated with Rock-Eval pyrolysis. A total of 33 core samples of Upper Badenian source rocks from the central–southern part of Getic Depression was studied. The results show that most samples with values of total organic carbon (TOC) < 1% wt.% have a limited potential of hydrocarbons (HC) generation, and 30% of samples with TOC < 1.82 wt.% and kerogen type III, presenting particularly gas generation potential. In three samples from the Bibești, Grădiște and Socu structures the kerogen type III-II was identified, indicating the capability of oil and gas generation. The Badenian source rocks are thermally immature, as few samples are in the pre-oil window, with values of vitrinite reflectance (VRo%) ranging between 0.41% and 0.55%, and the values of Tmax between 409 °C and 443 °C. Optical microscopy with reflected white light and fluorescence blue light was used for identification of terrigenous macerals (vitrinite, liptinite as, resinite, cutinite, sporinite, and inertinite) associated with marine liptinite macerals (telalginite and lamalginite) showing yellow and bright–yellow epifluorescence. [ABSTRACT FROM AUTHOR]

The occurrence characteristics of sodium and its potential relationship with macerals in Zhundong coal, as well as in Shenfu coal with average sodium levels, are investigated in this study. A new five-step sequential extraction method was first conducted for determination. The occurrence status of sodium and its related macerals in samples was determined by microscope and SEM–EDS (scanning electron microscope–energy dispersive X-ray spectroscopy). Soluble sodium salts (H2O-Na) make up the primary proportion of sodium in Zhundong coal, at approximately 50%, while various sodium species are distributed in Shenfu coal with nonobvious differences. Inertinite contains more sodium than vitrinite does in both coals, and the highest enrichment degree of sodium was discovered in inertinite from Zhundong coal, which presented primarily as NaCl crystals (H2O-Na) in fusinite cells, with a local weight percentage of over 15%. More specifically, H2O-Na and insoluble Na both tend to enrich in fusinite. Additionally, it is found that maceral-rich products can be gathered using triboelectrostatic separation, and a portion of sodium can thus be removed from the coal by removing inertinite. This study may provide new insights and references regarding sodium removal from Zhundong coal. [ABSTRACT FROM AUTHOR]

Thirteen raw coal samples from Qinshui coalfield were prepared to produce coal-based graphene, and the raw coal, coal-based graphite, and coal-based graphene sheets (GS) were characterized by X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy with energy dispersive spectrometer (SEM-EDS), and high-resolution transmission electron microscopy (HRTEM). The results show that the graphitization degree of coal-based graphite is positively linearly correlated with the reflectance of raw coal, has a low positive correlation with the content of inertinite, and has a low positive correlation with the content of vitrinite in raw coal. The crystallite width (La) and crystallite height (Lc) of coal-based graphite and graphene are positively linearly correlated with the reflectance of raw coal. La and Lc of coal-based graphite are distributed in 17.591–48.374 nm and 11.359–23.023 nm, respectively. After redox, La and Lc of coal-based graphene are distributed in 4.405 nm–6.243 nm and 0.804–1.144 nm, respectively. The defect degree (ID/IG) of coal-based graphene is higher than that of raw coal, demineralized coal, and coal-based graphite. The coal-based graphene is thin and transparent, and only contained carbon and oxygen. Combined with the parameters of XRD and HRTEM, it is calculated that the interlayer spacing (d002) of Qinshui-coal-based graphene is about 0.4007 nm and the number of layers (Nave) is about 5. [ABSTRACT FROM AUTHOR]

This study evaluates the palynologic, organic, inorganic, and petrographic properties of organic-rich black shale (Mahamid Mine) in the El Sebaiya area, Nile Valley, Egypt. Black shale is composed of quartz (50%), calcite (10%), kaolinite (25%) and montmorillonite (15%). Organic and inorganic analyses revealed that this shale was deposited under oxic to anoxic marine conditions during strong chemical weathering. Black shale has poor to very good organic richness, and poor to fair hydrocarbon potential. Organic petrography indicates that the kerogen is mixed types II/III and III and is immature to marginally mature (%VRo is 0.44 and 0.53). Liptinite macerals consist of alginite, cutinite, and bituminite. The hydrocarbon products to be generated at higher maturity are expected to be oil and gas. [ABSTRACT FROM AUTHOR]

Organic petrology is an important tool used to characterize dispersed organic matter (DOM) in sediments and sedimentary rocks, and to assess its thermal maturity. This study was carried out on 33 cutting samples (Middle-Upper Jurassic) from the Ramalhal-1 well to characterize the particulate organic matter and to evaluate its thermal maturity. The samples were submitted to optical petrography analysis (reflected white and blue incident lights) and the mean random reflectance was measured. Microscopic observations revealed a low DOM content, characterized by the predominance of macerals of the inertinite group (including charcoal), followed by solid bitumen. Huminite/vitrinite is usually small in size and quantity. Liptinite macerals were also present, represented by sporinite, cutinite, liptodetrinite and rare bituminite. A type III-IV kerogen was defined for the Ramalhal-1 sequence. Huminite/vitrinite mean random reflectance varied between 0.38% and 0.75%, pointing to an immature-to-mature stage of the organic matter. Multi-populations of solid bitumen occurred in almost all the samples, filling voids and fractures in the inorganic materials (mainly carbonates). The bitumen populations were quite heterogeneous, concerning both the optical characteristics and distribution, displaying different thermal maturities. No relationship between vitrinite and bitumen reflectance was established, indicating that these bitumens were not generated in situ. [ABSTRACT FROM AUTHOR]

Late Permian coal deposits are widely distributed throughout southwestern China. This paper describes the petrological composition of the last coal seam in the Longmendong section of the Emeishan area during the latest Changhsingian (Permian) and records important information regarding the evolution of the mass extinction event that occurred at the end of the Permian. The results show that the dominant coal maceral group is vitrinite, followed by liptinite and inertinite macerals, and the coal minerals include quartz, chamosite and pyrite. The pyrofusinite and carbon microparticles occurrence modes could have been formed during wildfires in the adjacent areas. The β-tridymite occurrence modes and the high proportions and occurrence modes of magmatic quartz indicate that synchronous felsic volcanic activity occurred during the peat mire accumulation period. The chamosite and quartz occurrence modes suggest that they primarily precipitated from Fe-Mg-rich siliceous solutions that was derived from the weathering of nearby Emeishan basalt. The pyritic coal balls occurrence modes in the C1 coal seam are likely the result of coal-forming plants and Fe-Mg-rich siliceous solutions in neutral to weak alkaline conditions during late syngenetic stages or early epigenetic stages within paleomires. [ABSTRACT FROM AUTHOR]

Fine-grained sedimentary successions contain the most detailed record of past environmental conditions. High-resolution analyses of these successions yield important insights into sedimentary composition and depositional processes and are, therefore, required to contextualise and interpret geochemical data which are commonly used as palaeoclimate proxies. The Kimmeridge Clay Formation (KCF) is a 500 m-thick mudstone succession deposited throughout the North Sea in the Late Jurassic and records environmental conditions through this time. Here, we present petrographic analyses (on 36 thin sections) on a 50 m section of a KCF core from the Cleveland Basin (Yorkshire, UK) to investigate controls on sedimentation in this region during the Tithonian, Late Jurassic. Facies descriptions demonstrate that deposition took place in a hydrodynamically variable environment in which the sediment origins, sediment dispersal mechanisms, and redox conditions fluctuated on the scale of thousands of years. Petrographic analyses show that the sediment comprises marine (algal macerals, calcareous fossils), detrital (quartz, clay, feldspar), and diagenetic (dolomite and authigenic kaolinite) components and that several sediment dispersal mechanisms influenced deposition and facilitated both the supply and preservation of terrestrial and marine organic material. This work provides a framework for the interpretation of geochemical palaeoclimate proxies and reinforces the importance of looking at the rock when interpreting whole-rock geochemical data. [ABSTRACT FROM AUTHOR]

In order to study the liberation characteristics of different macerals in coal, one must improve the liberation degree of macerals in coal and promote the utilization of macerals based on their properties. Based on the idea of quick cooling to change the brittleness and toughness of different macerals, the characteristics of macerals in coal are studied here by liquid nitrogen quenching pretreatment. In particular, coarse-grained samples (with a particle size of 1–3 mm) were. For this study, coal samples were sourced from the Yan'an Formation (J2y), a middle Jurassic coal formation in the Huangling no. 1 coal mine, located in northern Shaanxi Province, China. Firstly, we analyzed the coal properties and coal petrographic characteristics by the Chinese national standard method. Secondly, the distribution characteristics of macerals in different particle sizes (>0.9, 0.5–0.9, 0.1–0.5, and <0.1) were studied. Then, the samples with different particle sizes were quenched with or without liquid nitrogen to obtain the experimental group and blank group products. Finally, the differences in the liberation characteristics between the experimental group and the blank group products were studied via analyzing the micromorphology, specific surface area, pore volume, pore size and liberation degree. Our results for the particles size and liberation degree analysis indicate that inertinite and vitrinite were enriched in the coarse particles (>0.5 mm) and fine particles (<0.1 mm) here, respectively. Moreover, quenching pretreatment could contribute to the liberation of different macerals from coal, mainly because of the different effects of stress on the different components when they suddenly encounter cold, and this kind of liberation is mainly arc-shaped liberation between different macerals. In addition, along with the above results, this paper presents an optimized model for the liberation of macerals based on a combination of screening, liquid nitrogen quenching pretreatment and re-crushing. [ABSTRACT FROM AUTHOR]

The amber-bearing coaly shale from the La Cumbre deposit (Cordillera Septentrional, Dominican Republic) contains a large quantity of altered, coalified plant detritus. The coals in these shales are in the transition stage from meta-lignite to subbituminous coals. They are composed mainly of inertinite macerals such as fusinite, semifusinite, macrinite and secretinite. Fossil resin found in the deposit occurs in two forms: detrital grains up to several centimetres in size (type I) and very fine authigenic grains, of a few micrometers in size, inside the humic laminae (type II, resinite). The detrital fossil resins are transparent, with few mineral and organic inclusions. In their composition they contain sulfides, which may come from sulfate reduction, inclusions of plants and/or insects or be caused by volcanic activity developed in surrounding coal series. The resinites are strongly saturated with various inclusions and spatially associated with framboidal pyrite aggregates. Both fossil resin types were probably deposited in a shallow coastal lake environment in the zone bordering the floodplain of the river, with periodic floods. The marine environment conditions, which were progressively changing from oxidizing to reducing, are likely associated with the formation of the fossil resin. [ABSTRACT FROM AUTHOR]

In order to assess a source rock for economical exploitation purposes, many parameters should be considered; regarding the geochemical aspects, the most important ones are the amount of organic matter (OM) and its quality. Quality refers to the thermal maturity level and the type of OM from which it was formed. The origin of the OM affects the ability of the deposited OM between sediments to generate oil, gas, or both with particular potential after going through thermal maturation. Vitrinite reflectance and programmed pyrolysis (for instance, Rock-Eval) are common methods for evaluating the thermal maturity of the OM and its potential to generate petroleum, but they do not provide us with answers to what extent solid bitumen is oil-prone or gas-prone, as they are bulk geochemical methods. In the present study, Raman spectroscopy (RS), as a powerful tool for studying carbonaceous materials and organic matter, was conducted on shale and coal samples and their individual macerals to show the potential of this technique in kerogen typing and to reveal the parent maceral of the examined bitumen. The proposed methodology, by exhibiting the chemical structure of different organic matters as a major secondary product in unconventional reservoirs, can also detect the behavior of solid bitumen and its hydrocarbon production potential for more accurate petroleum system evaluation. [ABSTRACT FROM AUTHOR]

Anthracite and coal-based graphite (CBG) samples were collected at varying distances from a granite intrusion. Optical microscopy, X-ray diffraction, Raman spectroscopy, and high-resolution transmission electron microscopy (HRTEM) were used to characterize the structural evolution of CBG at different scales. The results indicated differences in the graphitization rates of coal macerals and crystallization degree of different graphite-like particles. Differentiated graphitization of coal was caused by deformation, which led to the discontinuous distribution of CBG. This indicates that samples located at the same distance from the intrusion were graphitized to different degrees or that CBG with a similar graphitization degree occurred at varying distances from the intrusion. A possible mechanism for graphitization is strain-induced graphitization, where the local stress concentration leads to preferred orientations of the basic structure units (BSUs), as well as the motion and rearrangement of structural defects, resulting in the formation of a locally ordered structure. The graphitization degree is enhanced as the local graphite structure spreads. [ABSTRACT FROM AUTHOR]

The Zoovch Ovoo uranium deposit is located in East Gobi Basin in Mongolia. It is hosted in the Sainshand Formation, a Late Cretaceous siliciclastic reservoir, in the lower part of the post-rift infilling of the Mesozoic East Gobi Basin. The Sainshand Formation corresponds to poorly consolidated medium-grained sandy intervals and clay layers deposited in fluvial-lacustrine settings. The uranium deposit is confined within a 60- to 80-m-thick siliciclastic reservoir inside aquifer driven systems, assimilated to roll-fronts. As assessed by vitrinite reflectance (%Rr < 0.4) and molecular geochemistry, the formation has never experienced significant thermal maturation. Detrital organic matter (type III and IV kerogens) is abundant in the Zoovch Ovoo depocenter. In this framework, uranium occurs as: (i) U-rich macerals without any distinguishable U-phase under SEM observation, containing up to 40 wt % U; (ii) U expressed as UO2 at the rims of large (several millimeters) macerals and (iii) U oxides partially to entirely replacing macerals, while preserving the inherited plant texture. Thus, uranium is accumulated gradually in the macerals through an organic carbon–uranium epigenization process, in respect to the maceral's chemistry and permeability. Most macerals are rich in S and, to a lesser extent, in Fe. Frequently, Fe and S contents do not fit the stoichiometry of pyrite, although pyrite also occurs as small inclusions within the macerals. The organic matter appears thus as a major redox trap for uranium in this kind of geological setting. [ABSTRACT FROM AUTHOR]