Search

The empty-space subsequent filling mining method is the main mining scheme for underground metal mines to achieve large-scale mechanized mining. The stage height, one of the main parameters of this method, affects the various production process aspects of the mine and influences the stability of the goaf. In order to determine the stage height scientifically and rationally in the empty-space subsequent filling mining method, a formula for the stabilized critical safe height of a high goaf in an underground metal mine was derived based on Pu's arch equilibrium theory, Bieniawski's pillar strength limit theory, and the Kastner equation and combined with the results of an orthogonal analysis to rank the importance of the main factors in the formula. A copper mine in Jiangxi Province was used as a case study, with the reliability of the formula verified by numerical simulation and industrial testing. The factors in the formula influencing the critical stabilized safe height of the goaf were, in descending order, the compressive strength of the rock body, the width of the two-step mining pillar, the width of the one-step mining room, the mining height, and the depth of mining. Based on the calculation results, the recommended stage heights are 30 m (−378 m middle section) and 25 m (−478 m middle section) in the area of poor rock body stability and 50 m in the area of better rock body stability. The simulation results show that the goaf is significantly affected by the compressive stress under the condition of a certain rock body stability and that the compressive stress increases with increasing goaf height. The minimum recommended values of the sidewall safety coefficients in areas of poor and better rock stability are 1.04 and 1.06, respectively. The volume deviation coefficients of the three industrial test mines were all controlled within 3%, indicating that no obvious collapse and destabilization phenomenon occurred in the goaf. This paper provides some theoretical and applied guidance for the stage height design of similar underground metal mines using the empty-space subsequent filling mining method. [ABSTRACT FROM AUTHOR]

Water-quenched copper slag (WCS) modified with alumina (Al2O3) has been proven as a cement substitute; however, the effect of Al2O3 on structural properties of WCS related to pozzolanic activity has not been well investigated. The structural properties and the pozzolanic activity of WCS with different amounts of Al2O3 are characterized by X-ray diffraction, differential scanning calorimetry, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and the uniaxial compressive strength test. The results show that only amorphous exists in copper slag, and the stability of amorphous first increases and then decreases with the increase in the alumina content. The addition of alumina significantly improves the pozzolanic activity of WCS at 7 and 28 days, but it has little effect on the pozzolanic activity of WCS when the slag's curing age is 3 days. The results also show the increase in the non-bridging oxygen content, the decrease in the degree of polymerization, and the transition from Q2 and Q4 to Q3 with the increase of alumina content. Moreover, the addition of aluminum will convert Si-O-Si into Si-O-Al. These experimental results show that the addition of alumina can improve the pozzolanic activity of WCS, which can be used to partially replace cement. [ABSTRACT FROM AUTHOR]

Cemented paste backfill (CPB) is the primary solution to improving the safety of continuous mining. The interaction between rock mass and backfill is an important indicator of backfill stability. The creep behavior of weak rock mass is an essential factor, which causes the evolution of stresses and displacements in the backfill stope. In this paper, numerical models were constructed to analyze the interactions between rock mass and backfill by considering the creep behavior of the rock mass, filling interval, and backfill strength. The numerical simulation results showed the effects of different parameters, including the number of backfilling layers, filling interval time (FIT), and backfill strength under creep behavior on stress, displacements, and plastic deformation. The horizontal displacement near the mid-height and vertical displacement at the top of the backfilled stope is the largest compared to layered backfilling. The stress within the backfilled stope is smallest when the stope is filled in a single layer. With increasing FIT, stress in the backfilled stope decreases. FIT mainly affected the horizontal displacement of the stope. The stresses on the stope bottom decrease when the strength of the middle-backfilled stope decreases. Overall, this study provides important insights for understanding the creep behavior of rock mass in underground backfilling practices. [ABSTRACT FROM AUTHOR]

The transition from open pit mining to underground mining is essential for mineral resources to achieve deep excavation. Recently, cemented paste backfill (CPB) has been proposed as a novel technology to achieve open pit backfill (OPB). The proposed method not only eliminates the danger of the open-pit slope but also reduces the disposal of waste tailings. In order to ensure safe mining during the synergetic operation of OPB and underground mining, it is of great significance to improve this technology. In the present study, an open-pit metal mine in Anhui Province was taken as the research object. Then, the safety of underground stope roofs, underground backfill pillars, and open-pit slopes was evaluated during OPB. To this end, numerical simulations were performed and experiments were conducted on a similar physical model. Accordingly, the backfill mechanical parameters were optimized. The obtained results show that backfill height exerts the most significant effect on the safety of roofs and underground backfill pillars, accompanied by small displacements along the vertical direction during the backfill process. Moreover, concentration was observed at the foot of the slope, while the overall structure remained stable with no considerable displacement. The overall safety factors met the safety requirements. Based on the obtained results, the optimal foundation strength, foundation height, backfill strength and backfill height were 4 MPa, 10 m, 1.5 MPa, and 120 m, respectively. Moreover, it was concluded that displacements in the abovementioned three regions tend to be stable when the backfill height exceeds 150 m without damage. The present article provides a certain theoretical and application guideline for OPB practices in similar metal mines and suggests possibilities for cleaner production. [ABSTRACT FROM AUTHOR]

Calcium silicates are the most predominant phases in ordinary Portland cement, inside which magnesium is one of the momentous impurities. In this work, using the first-principles density functional theory (DFT), the impurity formation energy (Efor) of Mg substituting Ca was calculated. The adsorption energy (Ead) and configuration of the single water molecule over Mg-doped β-dicalcium silicate (β-C2S) and M3-tricalcium silicate (M3-C3S) surfaces were investigated. The obtained Mg-doped results were compared with the pristine results to reveal the impact of Mg doping. The results show that the Efor was positive for all but one of the calcium silicates surfaces (ranged from −0.02 eV to 1.58 eV), indicating the Mg substituting for Ca was not energetically favorable. The Ead of a water molecule on Mg-doped β-C2S surfaces ranged from –0.598 eV to −1.249 eV with the molecular adsorption being the energetically favorable form. In contrast, the Ead on M3-C3S surfaces ranged from −0.699 eV to −4.008 eV and the more energetically favorable adsorption on M3-C3S surfaces was dissociative adsorption. The influence of Mg doping was important since it affected the reactivity of surface Ca/Mg sites, the Ead of the single water adsorption, as well as the adsorption configuration compared with the water adsorption on pristine surfaces. [ABSTRACT FROM AUTHOR]

This study demonstrates the feasibility of recycling lead–zinc tailing (LZT) as a cemented paste backfill (CPB) by considering the mechanical properties and environmental effects, thus providing an approach for safe and environmentally friendly treatment of LZT. First, the mechanical properties of CPB samples were tested. When the cement/tailing ratio was 1:6 and the slurry concentration was 70%, the maximum unconfined compressive strength (UCS) of the CPB cured for 28 days reaching 2.05 MPa, which could ensure safe mining. Then, the metals with pollution potential in the backfill slurry were investigated through static leaching. Finally, after adding immobilisation materials to stabilise excessive metals, the environmental stability of the CPB was demonstrated through dynamic leaching and a toxicity characteristic leaching procedure. The results show that the lead leached from the backfill slurry still exceeds the Chinese standard for groundwater quality (GB/T14848-2017 Class III). The addition of 2 mg/L polyaluminium sulfate (PAS) can further improve the strength of the CPB and maintain the environmental friendliness of the CPB. Therefore, the technology of recovering LZT as a CPB proposed in this study is an effective alternative to deal with LZT, which can help lead–zinc mines meet the requirements of cleaner production. [ABSTRACT FROM AUTHOR]

Understanding cement hydration is of crucial importance for the application of cementitious materials, including cemented paste backfill. In this work, the adsorption of a single water molecule on an M3-C3S (111) surface is investigated using density functional theory (DFT) calculations. The adsorption energies for 14 starting geometries are calculated and the electronic properties of the reaction are analysed. Two adsorption mechanisms, molecular adsorption and dissociative adsorption, are observed and six adsorption configurations are found. The results indicate that spontaneous dissociative adsorption is energetically favored over molecular adsorption. Electrons are transferred from the surface to the water molecule during adsorption. The density of states (DOS) reveals the bonding mechanisms between water and the surface. This study provides an insight into the adsorption mechanism at an atomic level, and can significantly promote the understanding of cement hydration within such systems. [ABSTRACT FROM AUTHOR]

Recycling phosphogypsum (PG) for cemented paste backfill (CPB) has been widely used at phosphate mines in China. However, the impurities in PG prolong the setting time and reduce the uniaxial compressive strength (UCS), limiting the engineering application of PG. This paper aims to investigate the feasibility of treated PG (TPG) washed repeatedly using deionised water (DW) for CPB. A water-washing pre-experiment was first conducted to find the proportion with the least DW demand and the effects of water-washing on ordinary PG (OPG). Then, based on the PG:DW ratio obtained from the pre-experiment, the properties of the OPG-based CPB (OCPB) and TPG-based CPB (TCPB) were tested using slump tests, UCS tests, and microstructural analysis. The results show that (1) after 11 water-washings at the PG:DW ratio of 1:1.75, the pH of the supernatant (pH = 6.328) meets the requirements of Chinese standard GB 8978-1996. (2) Water-washing improves the particle gradation quality of PG and removes the soluble impurities adsorbed at the surface of PG crystals. (3) The initial slump values of TCPB are 0.19–1.15 cm higher than that of OCPB, furthermore, the diffusivity values of TCPB are better than the performance of OCPB, with 0.61–1.68 cm of superiority. (4) The UCS values of TCPB are up to 0.838 MPa, 1.953 MPa, and 2.531 MPa, after curing for 7, 14, and 28 days. These are 0.283 MPa, 0.823 MPa, and 0.881 MPa higher than that of OCPB, respectively. It can be concluded that water-washing pre-treatment greatly improves the workability and mechanical property of PG-based CPB. These results are of great value for creating a reliable and environmentally superior alternative for the recycling of PG and for safer mining production. [ABSTRACT FROM AUTHOR]