Search

The effective control and treatment of acid mine drainage (AMD) from sulfide-containing mine wastes is of fundamental importance for current and future long-term sustainable and cost-effective mining industry operations, and for sustainable management of legacy AMD sites. Historically, AMD management has focused on the use of expensive neutralising chemicals to treat toxic leachates. Accordingly, there is a need to develop more cost-effective and efficient methods to prevent AMD at source. Laboratory kinetic leach column experiments, designed to mimic a sulfide-containing waste rock dump, were conducted to assess the potential of organic waste carbon supplements to stimulate heterotrophic microbial growth, and supress pyrite oxidation and AMD production. Microbiological results showed that the addition of biosolids was effective at maintaining high microbial heterotroph populations and preventing AMD generation over a period of 80 weeks, as verified by leachate chemistry and electron microscopy analyses. This research contributes to the ongoing development of a cost effective, multi-barrier geochemical-microbial control strategy for reduced mineral sulfide oxidation rates at source.

Laboratory kinetic leach column (KLC) tests were carried out to define the conditions required to control acid generation from a highly reactive, potentially acid-forming (PAF) iron ore waste rock. It was found that lime addition (0.1 wt % blended) plus either blending of silicates (25 wt % K-feldspar and 25 wt % chlorite), or addition of a non-acid forming (NAF) top cover containing about 10% dolomite (PAF:NAF = 5:1 wt %), when watered/flushed with lime-saturated water, greatly reduced acid generation as compared to the control KLC (PAF alone, watered/flushed with Milli-Q water), but did not result in circum-neutral pH as required for pyrite surface passivation and effective acid and metalliferous drainage (AMD) mitigation. In contrast, the combined use of these treatments—blended lime and silicates with an NAF cover and watering/flushing with lime-saturated water—resulted in leachate pH of 12 (up to 24 weeks). Mass balance calculations for Ca2+ and scanning electron microscopy (SEM) analyses suggest that calcite or gypsum may have formed in the NAF-amended KLCs and lime with added silicate KLC. Although the combined approach in the form trialled here may not be practical or cost-effective, control of a highly reactive natural PAF waste by pyrite surface passivation appears to be possible, and an improved treatment methodology (e.g., slightly increased lime blending without the need for further lime watering/flushing) could usefully be examined in the future.

Acid and metalliferous drainage (AMD) is broadly accepted to be a major global environmental problem facing the mining industry, requiring expensive management and mitigation. A series of laboratory-scale kinetic leach column (KLC) experiments, using both synthetic and natural mine wastes, were carried out to test the efficacy of our pyrite passivation strategy (developed from previous research) for robust and sustainable AMD management. For the synthetic waste KLC tests, initial treatment with lime-saturated water was found to be of paramount importance for maintaining long-term circum-neutral pH, favourable for the formation and preservation of the pyrite surface passivating layer and reduced acid generation rate. Following the initial lime-saturated water treatment, minimal additional alkalinity (calcite-saturated water) was required to maintain circum-neutral pH for the maintenance of pyrite surface passivation. KLC tests examining natural potentially acid forming (PAF) waste, with much greater peak acidity than that of the synthetic waste, blended with lime (≈2 wt %) with and without natural non-acid-forming (NAF) waste covers, were carried out. The addition of lime and use of NAF covers maintained circum-neutral leachate pH up to 24 weeks. During this time, the net acidity generated was found to be significantly reduced by the overlying NAF cover. If the reduced rate of acidity production from the natural PAF waste is sustained, the addition of smaller (more economically-feasible) amounts of lime, together with application of NAF wastes as covers, could be trialled as a potential cost-effective AMD mitigation strategy.