Search

Abstract In this research, we design and implement a small, convenient, and noninvasive paper-based microfluidic sweat sensor that can simultaneously detect multiple key biomarkers in human sweat. The origami structure of the chip includes colorimetric and electrochemical sensing regions. Different colorimetric sensing regions are modified with specific chromogenic reagents to selectively identify glucose, lactate, uric acid, and magnesium ions in sweat, as well as the pH value. The regions of electrochemical sensing detect cortisol in sweat by molecular imprinting. The entire chip is composed of hydrophilically and hydrophobically treated filter paper, and 3D microfluidic channels are constructed by using folding paper. The thread-based channels formed after the hydrophilic and hydrophobic modifications are used to control the rate of sweat flow, which in turn can be used to control the sequence of reactions in the differently developing colored regions to ensure that signals of the best color can be captured simultaneously by the colorimetric sensing regions. Finally, the results of on-body experiments verify the reliability of the proposed sweat sensor and its potential for the noninvasive identification of a variety of sweat biomarkers.

Abstract The development of fully solution-processed, biodegradable piezoelectrics is a critical step in the development of green electronics towards the worldwide reduction of harmful electronic waste. However, recent printing processes for piezoelectrics are hindered by the high sintering temperatures required for conventional perovskite fabrication techniques. Thus, a process was developed to manufacture lead-free printed piezoelectric devices at low temperatures to enable integration with eco-friendly substrates and electrodes. A printable ink was developed for screen printing potassium niobate (KNbO3) piezoelectric layers in microns of thickness at a maximum processing temperature of 120 °C with high reproducibility. Characteristic parallel plate capacitor and cantilever devices were designed and manufactured to assess the quality of this ink and evaluate its physical, dielectric, and piezoelectric characteristics; including a comparison of behaviour between conventional silicon and biodegradable paper substrates. The printed layers were 10.7–11.2 μm thick, with acceptable surface roughness values in the range of 0.4–1.1 μm. The relative permittivity of the piezoelectric layer was 29.3. The poling parameters were optimised for the piezoelectric response, with an average longitudinal piezoelectric coefficient for samples printed on paper substrates measured as d 33, eff, paper = 13.57 ± 2.84 pC/N; the largest measured value was 18.37 pC/N on paper substrates. This approach to printable biodegradable piezoelectrics opens the way forward for fully solution-processed green piezoelectric devices.

Abstract Nitrocellulose (NC) membranes, as porous paper-like substrates with high protein-binding capabilities, are very popular in the field of point-of-care immunoassays. However, generating robust hydrophobic structures in NC membranes to fabricate microfluidic paper-based analytical devices (μPADs) remains a great challenge. At present, the main method relies on an expensive wax printer. In addition, NC membranes very easy to adhere during the printing process due to electrostatic adsorption. Herein, we developed a facile, fast and low-cost strategy to fabricate μPADs in NC membranes by screen-printing polyurethane acrylate (PUA) as a barrier material for defining flow channels and reaction zones. Moreover, hydrophobic barriers based on UV-curable PUA can resist various surfactant solutions and organic solvents that are generally used in immunoassays and biochemical reactions. To validate the feasibility of this PUA-based NC membrane for immunoassays in point-of-care testing (POCT), we further designed and assembled a rotational paper-based analytical device for implementing a multiplexed enzyme-linked immunosorbent assay (ELISA) in a simple manner. Using the proposed device under the optimal conditions, alpha fetoprotein (AFP) and carcinoembryonic antigen (CEA) could be identified, with limits of detection of 136 pg/mL and 174 pg/mL, respectively, which are below the threshold values of these two cancer biomarkers for clinical diagnosis. We believe that this reliable device provides a promising platform for the diagnosis of disease based on ELISA or other related bioassays in limited settings or remote regions.

The development of fully solution-processed, biodegradable piezoelectrics is a critical step in the development of green electronics towards the worldwide reduction of harmful electronic waste. However, recent printing processes for piezoelectrics are hindered by the high sintering temperatures required for conventional perovskite fabrication techniques. Thus, a process was developed to manufacture lead-free printed piezoelectric devices at low temperatures to enable integration with eco-friendly substrates and electrodes. A printable ink was developed for screen printing potassium niobate (KNbO3) piezoelectric layers in microns of thickness at a maximum processing temperature of 120 °C with high reproducibility. Characteristic parallel plate capacitor and cantilever devices were designed and manufactured to assess the quality of this ink and evaluate its physical, dielectric, and piezoelectric characteristics; including a comparison of behaviour between conventional silicon and biodegradable paper substrates. The printed layers were 10.7–11.2 μm thick, with acceptable surface roughness values in the range of 0.4–1.1 μm. The relative permittivity of the piezoelectric layer was 29.3. The poling parameters were optimised for the piezoelectric response, with an average longitudinal piezoelectric coefficient for samples printed on paper substrates measured as d33, eff, paper = 13.57 ± 2.84 pC/N; the largest measured value was 18.37 pC/N on paper substrates. This approach to printable biodegradable piezoelectrics opens the way forward for fully solution-processed green piezoelectric devices. [ABSTRACT FROM AUTHOR]

In this paper, a novel simulation-based evolutionary method is presented for designing parameter-free MEMS structures with maximum degrees of freedom. This novel design method enabled semiautomatic structure evolution by weighing the attributes of each segment of the structure and yielded an optimal design after multiple iterations. The proposed method was utilized to optimize the pressure-sensitive diaphragm of a piezoresistive pressure sensor (PPS). Finite element method (FEM) simulations revealed that, in comparison to conventional diaphragms without islands and with square islands, the optimized diaphragm increased the stress by 10% and 16% and reduced the nonlinearity by 57% and 77%, respectively. These improvements demonstrate the value of this method. Characterization of the fabricated PPS revealed a high sensitivity of 8.8 mV V−1 MPa−1 and a low nonlinearity of 0.058% FS at 20 °C, indicating excellent sensor performance. [ABSTRACT FROM AUTHOR]

Hanging drop cultures provide a favorable environment for the gentle, gel-free formation of highly uniform three-dimensional cell cultures often used in drug screening applications. Initial cell numbers can be limited, as with primary cells provided by minimally invasive biopsies. Therefore, it can be beneficial to divide cells into miniaturized arrays of hanging drops to supply a larger number of samples. Here, we present a framework for the miniaturization of hanging drop networks to nanoliter volumes. The principles of a single hanging drop are described and used to construct the fundamental equations for a microfluidic system composed of multiple connected drops. Constitutive equations for the hanging drop as a nonlinear capacitive element are derived for application in the electronic-hydraulic analogy, forming the basis for more complex, time-dependent numerical modeling of hanging drop networks. This is supplemented by traditional computational fluid dynamics simulation to provide further information about flow conditions within the wells. A fabrication protocol is presented and demonstrated for creating transparent, microscale arrays of pinned hanging drops. A custom interface, pressure-based fluidic system, and environmental chamber have been developed to support the device. Finally, fluid flow on the chip is demonstrated to align with expected behavior based on the principles derived for hanging drop networks. Challenges with the system and potential areas for improvement are discussed. This paper expands on the limited body of hanging drop network literature and provides a framework for designing, fabricating, and operating these systems at the microscale. [ABSTRACT FROM AUTHOR]

Human pluripotent stem cells (hPSCs) represent an excellent cell source for regenerative medicine and tissue engineering applications. However, there remains a need for robust and scalable differentiation of stem cells into functional adult tissues. In this paper, we sought to address this challenge by developing magnetic microcapsules carrying hPSC spheroids. A co-axial flow-focusing microfluidic device was employed to encapsulate stem cells in core-shell microcapsules that also contained iron oxide magnetic nanoparticles (MNPs). These microcapsules exhibited excellent response to an external magnetic field and could be held at a specific location. As a demonstration of utility, magnetic microcapsules were used for differentiating hPSC spheroids as suspension cultures in a stirred bioreactor. Compared to standard suspension cultures, magnetic microcapsules allowed for more efficient media change and produced improved differentiation outcomes. In the future, magnetic microcapsules may enable better and more scalable differentiation of hPSCs into adult cell types and may offer benefits for cell transplantation. [ABSTRACT FROM AUTHOR]

Pipe contaminant detection holds considerable importance within various industries, such as the aviation, maritime, medicine, and other pertinent fields. This capability is beneficial for forecasting equipment potential failures, ascertaining operational situations, timely maintenance, and lifespan prediction. However, the majority of existing methods operate offline, and the detectable parameters online are relatively singular. This constraint hampers real-time on-site detection and comprehensive assessments of equipment status. To address these challenges, this paper proposes a sensing method that integrates an ultrasonic unit and an electromagnetic inductive unit for the real-time detection of diverse contaminants and flow rates within a pipeline. The ultrasonic unit comprises a flexible transducer patch fabricated through micromachining technology, which can not only make installation easier but also focus the sound field. Moreover, the sensing unit incorporates three symmetrical solenoid coils. Through a comprehensive analysis of ultrasonic and induction signals, the proposed method can be used to effectively discriminate magnetic metal particles (e.g., iron), nonmagnetic metal particles (e.g., copper), nonmetallic particles (e.g., ceramics), and bubbles. This inclusive categorization encompasses nearly all types of contaminants that may be present in a pipeline. Furthermore, the fluid velocity can be determined through the ultrasonic Doppler frequency shift. The efficacy of the proposed detection principle has been validated by mathematical models and finite element simulations. Various contaminants with diverse velocities were systematically tested within a 14 mm diameter pipe. The experimental results demonstrate that the proposed sensor can effectively detect contaminants within the 0.5−3 mm range, accurately distinguish contaminant types, and measure flow velocity. [ABSTRACT FROM AUTHOR]

The development of flexible capacitive pressure sensors has wide application prospects in the fields of electronic skin and intelligent wearable electronic devices, but it is still a great challenge to fabricate capacitive sensors with high sensitivity. Few reports have considered the use of interdigital electrode structures to improve the sensitivity of capacitive pressure sensors. In this work, a new strategy for the fabrication of a high-performance capacitive flexible pressure sensor based on MXene/polyvinylpyrrolidone (PVP) by an interdigital electrode is reported. By increasing the number of interdigital electrodes and selecting the appropriate dielectric layer, the sensitivity of the capacitive sensor can be improved. The capacitive sensor based on MXene/PVP here has a high sensitivity (~1.25 kPa−1), low detection limit (~0.6 Pa), wide sensing range (up to 294 kPa), fast response and recovery times (~30/15 ms) and mechanical stability of 10000 cycles. The presented sensor here can be used for various pressure detection applications, such as finger pressing, wrist pulse measuring, breathing, swallowing and speech recognition. This work provides a new method of using interdigital electrodes to fabricate a highly sensitive capacitive sensor with very promising application prospects in flexible sensors and wearable electronics. [ABSTRACT FROM AUTHOR]

The piezoelectric coupling principle is widely used (along with capacitive coupling and piezoresistive coupling) for MEMS accelerometers. Piezoelectric MEMS accelerometers are used primarily for vibration monitoring. Polymer piezoelectric MEMS accelerometers offer the merits of heavy-metal-free structure material and simple microfabrication flow. More importantly, polymeric piezoelectric MEMS accelerometers may be the basis of novel applications, such as fully organic inertial sensing microsystems using polymer sensors and organic integrated circuits. This paper presents a novel polymer piezoelectric MEMS accelerometer design using PVDF films. A simple and rapid microfabrication flow based on laser micromachining of thin films and 3D stereolithography was developed to fabricate three samples of this design. During proof-of-concept experiments, the design achieved a sensitivity of 21.82 pC/g (equivalent open-circuit voltage sensitivity: 126.32 mV/g), a 5% flat band of 58.5 Hz, and a noise density of 6.02 µg/√Hz. Thus, this design rivals state-of-the-art PZT-based counterparts in charge sensitivity and noise density, and it surpasses the performance capabilities of several commercial MEMS accelerometers. Moreover, this design has a 10-times smaller device area and a 4-times larger flat band than previous state-of-the-art organic piezoelectric MEMS accelerometers. These experimentally validated performance metrics demonstrate the promising application potential of the polymeric piezoelectric MEMS accelerometer design presented in this article. [ABSTRACT FROM AUTHOR]

Terahertz waves can interact with the nervous system of organisms under certain conditions. Compared to common optical modulation methods, terahertz waves have the advantages of low photon energy and low risk; therefore, the use of terahertz waves to regulate the nervous system is a promising new method of neuromodulation. However, most of the research has focused on the use of terahertz technology for biodetection, while relatively little research has been carried out on the biological effects of terahertz radiation on the nervous system, and there are almost no review papers on this topic. In the present article, we begin by reviewing principles and objects of research regarding the biological effects of terahertz radiation and summarizing the current state of related research from a variety of aspects, including the bioeffects of terahertz radiation on neurons in vivo and in vitro, novel regulation and detection methods with terahertz radiation devices and neural microelectrode arrays, and theoretical simulations of neural information encoding and decoding. In addition, we discuss the main problems and their possible causes and give some recommendations on possible future breakthroughs. This paper will provide insight and assistance to researchers in the fields of neuroscience, terahertz technology and biomedicine. [ABSTRACT FROM AUTHOR]

The synchronization phenomenon in nature has been utilized in sensing and timekeeping fields due to its numerous advantages, including amplitude and frequency stabilization, noise reduction, and sensitivity improvement. However, the limited synchronization bandwidth hinders its broader application, and few techniques have been explored to enhance this aspect. In this paper, we conducted theoretical and experimental studies on the unidirectional synchronization characteristics of a resonator with phase lock loop oscillation. A novel enhancement method for the synchronization bandwidth using a parametrically excited MEMS oscillator is proposed, which achieves a remarkably large synchronization bandwidth of 8.85 kHz, covering more than 94% of the hysteresis interval. Importantly, the proposed method exhibits significant potential for high-order synchronization and frequency stabilization compared to the conventional directly excited oscillator. These findings present an effective approach for expanding the synchronization bandwidth, which has promising applications in nonlinear sensing, fully mechanical frequency dividers, and high-precision time references. [ABSTRACT FROM AUTHOR]

Reservoir computing (RC) is a bio-inspired neural network structure which can be implemented in hardware with ease. It has been applied across various fields such as memristors, and electrochemical reactions, among which the micro-electro-mechanical systems (MEMS) is supposed to be the closest to sensing and computing integration. While previous MEMS RCs have demonstrated their potential as reservoirs, the amplitude modulation mode was found to be inadequate for computing directly upon sensing. To achieve this objective, this paper introduces a novel MEMS reservoir computing system based on stiffness modulation, where natural signals directly influence the system stiffness as input. Under this innovative concept, information can be processed locally without the need for advanced data collection and pre-processing. We present an integrated RC system characterized by small volume and low power consumption, eliminating complicated setups in traditional MEMS RC for data discretization and transduction. Both simulation and experiment were conducted on our accelerometer. We performed nonlinearity tuning for the resonator and optimized the post-processing algorithm by introducing a digital mask operator. Consequently, our MEMS RC is capable of both classification and forecasting, surpassing the capabilities of our previous non-delay-based architecture. Our method successfully processed word classification, with a 99.8% accuracy, and chaos forecasting, with a 0.0305 normalized mean square error (NMSE), demonstrating its adaptability for multi-scene data processing. This work is essential as it presents a novel MEMS RC with stiffness modulation, offering a simplified, efficient approach to integrate sensing and computing. Our approach has initiated edge computing, enabling emergent applications in MEMS for local computations. [ABSTRACT FROM AUTHOR]

This paper investigates the fundamental sensing mechanism of electrostatic MEMS gas sensors. It compares among the responsivities of a set of MEMS isopropanol sensors before and after functionalization, and in the presence and absence of electrostatic fields when operated in static and dynamic detection modes. In the static mode, we found that the sensors do not exhibit a measurable change in displacement due to added mass. On the other hand, bare sensors showed a clear change in displacement in response to isopropanol vapor. In the dynamic mode, functionalized sensors showed a measurable frequency shift due to the added mass of isopropanol vapor. In the presence of strong electrostatic fields, the measured frequency shift was found to be threefold larger than that in their absence in response to the same concentration of isopropanol vapor. The enhanced responsivity of dynamic detection allows the sensors to measure the vapor mass captured by the functional material, which is not the case for static detection. The detection of isopropanol by bare sensors in static mode shows that change in the medium permittivity is the primary sensing mechanism. The enhanced responsivity of dynamic mode sensors when operated in strong electrostatic fields shows that their sensing mechanism is a combination of a weaker added mass effect and a stronger permittivity effect. These findings show that electrostatic MEMS gas sensors are independent of the direction of the gravitational field and are, thus, robust to changes in alignment. It is erroneous to refer to them as 'gravimetric' sensors. [ABSTRACT FROM AUTHOR]

Polarization conversion and beam scanning metasurfaces are commonly used to reduce polarization mismatch and direct electromagnetic waves in a specific direction to improve the strength of a wireless signal. However, identifying suitable active and mechanically reconfigurable metasurfaces for polarization conversion and beam scanning is a considerable challenge, and the reported metasurfaces have narrow scanning ranges, are expensive, and cannot be independently controlled. In this paper, we propose a reconfigurable transmissive metasurface combined with a scissor and rotation actuator for independently controlling beam scanning and polarization conversion functions. The metasurface is constructed with rotatable unit cells (UCs) that can switch the polarization state between right-handed (RHCP) and left-handed circular polarization (LHCP) by flipping the UCs to reverse their phase variation. Moreover, independent beam scanning is achieved using the scissor actuator to linearly change the distance between the UCs. Numerical and experimental results confirm that the proposed metasurface can perform beam scanning in the range of 28° for both the positive and negative regions of a radiation pattern (RHCP and LHCP beams) at an operational frequency of 10.5 GHz. [ABSTRACT FROM AUTHOR]

In this paper, a composite pressure-sensitive mechanism combining diaphragm bending and volume compression was developed for resonant pressure microsensors to achieve high-pressure measurements with excellent accuracy. The composite mechanism was explained, and the sensor structure was designed based on theoretical analysis and finite element simulation. An all-silicon resonant high-pressure microsensor with multiple miniaturized cavities and dual resonators was developed, where dual resonators positioned in two resonant cavities with suitably different widths are used to perform opposite characteristics in pressure and the same characteristics at different temperatures, which can improve pressure sensitivities and realize temperature self-compensation by differential frequency output. The microsensor was fabricated by microfabrication, and the experimental results showed that the sensor had an accuracy of ±0.015% full scale (FS) in a pressure range of 0.1~100 MPa and a temperature range of −10~50 °C. The pressure sensitivity of the differential frequency was 261.10 Hz/MPa (~2523 ppm/MPa) at a temperature of 20 °C, and the temperature sensitivities of the dual resonators were −1.54 Hz/°C (~−14.5 ppm/°C) and −1.57 Hz/°C (~−15.6 ppm/°C) at a pressure of 2 MPa. The differential output had an outstanding stability within ±0.02 Hz under constant temperature and pressure. Thus, this research provides a convenient solution for high-pressure measurements because of its advantages, namely, large range, excellent accuracy and stability. [ABSTRACT FROM AUTHOR]

This paper presents a tunable multi-threshold micro-electromechanical inertial switch with adjustable threshold capability. The demonstrated device combines the advantages of accelerometers in providing quantitative acceleration measurements and g-threshold switches in saving power when in the inactive state upon experiencing acceleration below the thresholds. The designed proof-of-concept device with two thresholds consists of a cantilever microbeam and two stationary electrodes placed at different positions in the sensing direction. The adjustable threshold capability and the effect of the shock duration on the threshold acceleration are analytically investigated using a nonlinear beam model. Results are shown for the relationships among the applied bias voltage, the duration of shock impact, and the tunable threshold. The fabricated prototypes are tested using a shock-table system. The analytical results agree with the experimental results. The designed device concept is very promising for the classification of the shock and impact loads in transportation and healthcare applications. [ABSTRACT FROM AUTHOR]

Stress tolerance plays a vital role in ensuring the effectiveness of piezoresistive sensing films used in flexible pressure sensors. However, existing methods for enhancing stress tolerance employ dome-shaped, wrinkle-shaped, and pyramidal-shaped microstructures in intricate molding and demolding processes, which introduce significant fabrication challenges and limit the sensing performance. To address these shortcomings, this paper presents periodic microslits in a sensing film made of multiwalled carbon nanotubes and polydimethylsiloxane to realize ultrahigh stress tolerance with a theoretical maximum of 2.477 MPa and a sensitivity of 18.092 kPa−1. The periodic microslits permit extensive deformation under high pressure (e.g., 400 kPa) to widen the detection range. Moreover, the periodic microslits also enhance the sensitivity based on simultaneously exhibiting multiple synapses within the sensing interface and between the periodic sensing cells. The proposed solution is verified by experiments using sensors based on the microslit strategy for wind direction detection, robot movement sensing, and human health monitoring. In these experiments, vehicle load detection is achieved for ultrahigh pressure sensing under an ultrahigh pressure of over 400 kPa and a ratio of the contact area to the total area of 32.74%. The results indicate that the proposed microslit strategy can achieve ultrahigh stress tolerance while simplifying the fabrication complexity of preparing microstructure sensing films. [ABSTRACT FROM AUTHOR]

Transit-time ultrasonic flowmeters (TTUFs) are among the most widely used devices for flow measurements. However, traditional TTUFs are usually based on a bulk piezoelectric transducer, which limits their application in small-diameter channels. In this paper, we developed a miniaturized TTUF based on scandium-doped aluminum nitride (ScAlN) piezoelectric micromachined ultrasonic transducers (PMUTs). The proposed TTUF contains two PMUT-based transceivers and a π-type channel. The PMUTs contain 13 × 13 square cells with dimensions of 2.8 × 2.8 mm2. To compensate for the acoustic impedance mismatch with liquid, a layer of polyurethane is added to the surface of the PMUTs as a matching layer. The PMUT-based transceivers show good transmitting sensitivity (with 0.94 MPa/V surface pressure) and receiving sensitivity (1.79 mV/kPa) at a frequency of 1 MHz in water. Moreover, the dimensions of the π-type channel are optimized to achieve a measurement sensitivity of 82 ns/(m/s) and a signal-to-noise ratio (SNR) better than 15 dB. Finally, we integrate the fabricated PMUTs into the TDC-GP30 platform. The experimental results show that the developed TTUF provides a wide range of flow measurements from 2 to 300 L/h in a channel of 4 mm diameter, which is smaller than most reported channels. The accuracy and repeatability of the TTUF are within 0.2% and 1%, respectively. The proposed TTUF shows great application potential in industrial applications such as medical and chemical applications. [ABSTRACT FROM AUTHOR]

In this paper, a modification to the eigenmode operation of resonant gyroscopes is introduced. The multi-coefficient eigenmode operation can improve cross-mode isolation due to electrode misalignments and imperfections, which is one of the causes of residual quadrature errors in conventional eigenmode operations. A 1400 µm annulus aluminum nitride (AlN) on a silicon bulk acoustic wave (BAW) resonator with gyroscopic in-plane bending modes at 2.98 MHz achieves a nearly 60 dB cross-mode isolation when operated as a gyroscope using a multi-coefficient eigenmode architecture. The as-born frequency mismatches in multiple devices are compensated by physical laser trimming. The demonstrated AlN piezoelectric BAW gyroscope shows a large open-loop bandwidth of 150 Hz and a high scale factor of 9.5 nA/°/s on a test board with a vacuum chamber. The measured angle random walk is 0.145°/√h, and the bias instability is 8.6°/h, showing significant improvement compared to the previous eigenmode AlN BAW gyroscope. The results from this paper prove that with multi-coefficient eigenmode operations, piezoelectric AlN BAW gyroscopes can achieve a noise performance comparable to that of their capacitive counterpart while having the unique advantage of a large open-loop bandwidth and not requiring large DC polarization voltages. [ABSTRACT FROM AUTHOR]

This paper presents the design of a vision-based automated robotic microinjection system for batch injection of both zebrafish embryos and larvae. A novel visual recognition algorithm based on an automatic threshold and excessive dilatation is introduced to accurately identify the center of zebrafish embryos and larval yolks. A corresponding software system is developed using the producer-consumer model as the framework structure, and a friendly user interface is designed to allow operators to choose from a range of desired functions according to their different needs. In addition, a novel microstructural agarose device is designed and fabricated to simultaneously immobilize mixed batches of embryos and larvae. Moreover, a prototype microinjection system is fabricated by integrating hardware devices with visual algorithms. An experimental study is conducted to verify the performance of the robotic microinjection system. The results show that the reported system can accurately identify zebrafish embryos and larvae and efficiently complete batch microinjection tasks of the mixtures with an injection success rate of 92.05% in 13.88 s per sample. Compared with manual and existing microinjection systems, the proposed system demonstrates the merits of versatility, excellent efficiency, high success rate, high survival rate, and sufficient stability. [ABSTRACT FROM AUTHOR]

The vagus nerve (VN) plays an important role in regulating physiological conditions in the gastrointestinal (GI) tract by communicating via the parasympathetic pathway to the enteric nervous system (ENS). However, the lack of knowledge in the neurophysiology of the VN and GI tract limits the development of advanced treatments for autonomic dysfunctions related to the VN. To better understand the complicated underlying mechanisms of the VN-GI tract neurophysiology, it is necessary to use an advanced device enabled by microfabrication technologies. Among several candidates including intraneural probe array and extraneural cuff electrodes, microchannel electrode array devices can be used to interface with smaller numbers of nerve fibers by securing them in the separate channel structures. Previous microchannel electrode array devices to interface teased nerve structures are relatively bulky with thickness around 200 µm. The thick design can potentially harm the delicate tissue structures, including the nerve itself. In this paper, we present a flexible thin film based microchannel electrode array device (thickness: 11.5 µm) that can interface with one of the subdiaphragmatic nerve branches of the VN in a rat. We demonstrated recording evoked compound action potentials (ECAP) from a transected nerve ending that has multiple nerve fibers. Moreover, our analysis confirmed that the signals are from C-fibers that are critical in regulating autonomic neurophysiology in the GI tract. [ABSTRACT FROM AUTHOR]

This paper presents a high-performance MEMS accelerometer with a DC/AC electrostatic stiffness tuning capability based on double-sided parallel plates (DSPPs). DC and AC electrostatic tuning enable the adjustment of the effective stiffness and the calibration of the geometric offset of the proof mass, respectively. A dynamical model of the proposed accelerometer was developed considering both DC/AC electrostatic tuning and the temperature effect. Based on the dynamical model, a self-centering closed loop is proposed for pulling the reference position of the force-to-rebalance (FTR) to the geometric center of DSPP. The self-centering accelerometer operates at the optimal reference position by eliminating the temperature drift of the readout circuit and nulling the net electrostatic tuning forces. The stiffness closed-loop is also incorporated to prevent the pull-in instability of the tuned low-stiffness accelerometer under a dramatic temperature variation. Real-time adjustments of the reference position and the DC tuning voltage are utilized to compensate for the residue temperature drift of the proposed accelerometer. As a result, a novel controlling approach composed of a self-centering closed loop, stiffness-closed loop, and temperature drift compensation is achieved for the accelerometer, realizing a temperature drift coefficient (TDC) of approximately 7 μg/°C and an Allan bias instability of less than 1 μg. [ABSTRACT FROM AUTHOR]

Protein preconcentration is an essential sample preparation step for analysis in which the targeted proteins exist in low concentrations, such as bodily fluids, water, or wastewater. Nonetheless, very few practical implementations of miniaturized protein preconcentration devices have been demonstrated in practice, and even fewer have been integrated with other microanalytical steps. Existing approaches rely heavily on additional chemicals and reagents and introduce complexity to the overall assay. In this paper, we propose a novel miniaturized isoelectric focusing-based protein preconcentration screening device based on electrochemically derived pH gradients rather than existing chemical reagent approaches. In this way, we reduce the need for additional chemical reagents to zero while enabling device incorporation in a seamlessly integrated full protein analysis microsystem via Lab-on-PCB technology. We apply our previously presented Lab-on-PCB approach to quantitatively control the pH of a solution in the vicinity of planar electrodes using electrochemical acid generation through redox-active self-assembled monolayers. The presented device comprises a printed circuit board with an array of gold electrodes that were functionalized with 4-aminothiophenol; this formed a self-assembled monolayer that was electropolymerized to improve its electrochemical reversibility. Protein preconcentration was performed in two configurations. The first was open and needed the use of a holder to suspend a well of fluid above the electrodes; the second used microfluidic channels to enclose small volumes of fluid. Reported here are the resulting data for protein preconcentration in both these forms, with a quantitative concentration factor shown for the open form and qualitative proof shown for the microfluidic. [ABSTRACT FROM AUTHOR]

The development of mode-localized sensors based on amplitude output metrics has attracted increasing attention in recent years due to the potential of such sensors for high sensitivity and resolution. Mode-localization phenomena leverage the interaction between multiple coupled resonant modes to achieve enhanced performance, providing a promising solution to overcome the limitations of traditional sensing technologies. Amplitude noise plays a key role in determining the resolution of mode-localized sensors, as the output metric is derived from the measured AR (amplitude ratio) within the weakly coupled resonator system. However, the amplitude noise originating from the weakly coupled resonator's closed-loop circuit has not yet been fully investigated. This paper presents a decouple-decomposition (DD) noise analysis model, which is applied to achieve high resolution in a mode-localized tilt sensor based on a weakly coupled resonator closed-loop circuit. The DD noise model separates the weakly coupled resonators using the decoupling method considering the nonlinearity of the resonators. By integrating the decoupled weakly coupled resonators, the model decomposes the weakly coupled resonator's closed-loop circuit into distinct paths for amplitude and phase noise analyses. The DD noise model reveals noise effects at various circuit nodes and models the system noise in the closed-loop circuit of the weakly coupled resonators. MATLAB/Simulink simulations verify the model's accuracy when compared to theoretical analysis. At the optimal operating point, the mode-localized tilt sensor achieves an input-referred instability of 3.91 × 10-4° and an input-referred AR of PSD of 2.01 × 10-4°⁄√Hz using the closed-loop noise model. This model is also applicable to other varieties of mode-localized sensors. [ABSTRACT FROM AUTHOR]

Pressure sensors play a vital role in aerospace, automotive, medical, and consumer electronics. Although microelectromechanical system (MEMS)-based pressure sensors have been widely used for decades, new trends in pressure sensors, including higher sensitivity, higher accuracy, better multifunctionality, smaller chip size, and smaller package size, have recently emerged. The demand for performance upgradation has led to breakthroughs in sensor materials, design, fabrication, and packaging methods, which have emerged frequently in recent decades. This paper reviews common new trends in MEMS pressure sensors, including minute differential pressure sensors (MDPSs), resonant pressure sensors (RPSs), integrated pressure sensors, miniaturized pressure chips, and leadless pressure sensors. To realize an extremely sensitive MDPS with broad application potential, including in medical ventilators and fire residual pressure monitors, the “beam-membrane-island” sensor design exhibits the best performance of 66 μV/V/kPa with a natural frequency of 11.3 kHz. In high-accuracy applications, silicon and quartz RPS are analyzed, and both materials show ±0.01%FS accuracy with respect to varying temperature coefficient of frequency (TCF) control methods. To improve MEMS sensor integration, different integrated “pressure + x” sensor designs and fabrication methods are compared. In this realm, the intercoupling effect still requires further investigation. Typical fabrication methods for microsized pressure sensor chips are also reviewed. To date, the chip thickness size can be controlled to be <0.1 mm, which is advantageous for implant sensors. Furthermore, a leadless pressure sensor was analyzed, offering an extremely small package size and harsh environmental compatibility. This review is structured as follows. The background of pressure sensors is first presented. Then, an in-depth introduction to MEMS pressure sensors based on different application scenarios is provided. Additionally, their respective characteristics and significant advancements are analyzed and summarized. Finally, development trends of MEMS pressure sensors in different fields are analyzed. [ABSTRACT FROM AUTHOR]

The combination of flexible sensors and deep learning has attracted much attention as an efficient method for the recognition of human postures. In this paper, an in situ polymerized MXene/polypyrrole (PPy) composite is dip-coated on a polydimethylsiloxane (PDMS) sponge to fabricate an MXene/PPy@PDMS (MPP) piezoresistive sensor. The sponge sensor achieves ultrahigh sensitivity (6.8925 kPa−1) at 0–15 kPa, a short response/recovery time (100/110 ms), excellent stability (5000 cycles) and wash resistance. The synergistic effect of PPy and MXene improves the performance of the composite materials and facilitates the transfer of electrons, making the MPP sponge at least five times more sensitive than sponges based on each of the individual single materials. The large-area conductive network allows the MPP sensor to maintain excellent electrical performance over a large-scale pressure range. The MPP sensor can detect a variety of human body activity signals, such as radial artery pulse and different joint movements. The detection and analysis of human motion data, which is assisted by convolutional neural network (CNN) deep learning algorithms, enable the recognition and judgment of 16 types of human postures. The MXene/PPy flexible pressure sensor based on a PDMS sponge has broad application prospects in human motion detection, intelligent sensing and wearable devices. [ABSTRACT FROM AUTHOR]

Cervical spondylosis is a common disease that is often caused by long-term abnormal cervical curvature due to activities such as reading books and using computers or smartphones. This paper explores building an untethered and skin-integrated device in an e-skin form factor to monitor and haptically correct neck posture. The proposed design features a multilayered structure that integrates all flexible electronic circuits and components into a compact skin space while being untethered and skin conformal. An accelerometer in the e-skin attaches to the neck for posture sensing, while four vibration actuators closely touch the neck skin to provide localized vibrotactile stimuli that encode four-direction correction cues of neck flexion ± α and lateral bending ± β . To ensure the reliability of posture sensing and vibrotactile rendering during neck movement, it is necessary to prevent the e-skin device from shifting position. Thus, a hollow structure-based method is implemented for stably attaching the e-skin to the neck skin. Experiments validated the e-skin device's sensing precision, skin-conformal compliance, stickiness, stability and effectiveness during the motion of neck postures, including its discrimination of localized four-direction vibrotactile cues. A user study verified the device's performance for sensing and correcting different abnormal neck postures during activities such as using smartphones, reading books, and processing computer files. The proposed e-skin device may create opportunities for more convenient cervical spondylosis prevention and rehabilitation. [ABSTRACT FROM AUTHOR]

It is important to monitor the intra-/extracellular concentration of hydrogen peroxide (H2O2) in biological processes. However, miniaturized devices that enable portable and accurate H2O2 measurement are still in their infancy because of the difficulty of developing facile sensing strategies and highly integrated sensing devices. In this work, portable H2O2 sensors based on Pt-Ni hydrogels with excellent peroxidase-like and electrocatalytic activities are demonstrated. Thus, simple and sensitive H2O2 sensing is achieved through both colorimetric and electrochemical strategies. The as-fabricated H2O2 sensing chips exhibit favorable performance, with low detection limits (0.030 μM & 0.15 μM), wide linearity ranges (0.10 μM–10.0 mM & 0.50 μM–5.0 mM), outstanding long-term stability (up to 60 days), and excellent selectivity. With the aid of an M5stack development board, portable visual and electrochemical H2O2 sensors are successfully constructed without complicated and expensive equipment or professional operators. When applied to the detection of H2O2 released from HeLa cells, the results obtained by the developed sensors are in good agreement with those from an ultraviolet‒visible spectrophotometer (UV‒vis) (1.97 μM vs. 2.08 μM) and electrochemical station (1.77 μM vs. 1.84 μM). [ABSTRACT FROM AUTHOR]

In this paper, an angular position sensor (APS) designed for a resonant miniaturized scanning mirror (M-SM) is presented. The APS operates based on the principle of differential variable capacitance, significantly expanding the detectable bandwidth from a few hertz to several kilohertz. By modeling the motion characteristics, the sampling rates of the biaxial scanning angles are 1473.6 times and 539.4 times higher than those of conventional sensors. Initially, the motion characteristics model is presented as a simple harmonic motion, converting sampled capacitance into continuous capacitance. Subsequently, the nonparallel state of the M-SM and sensor is transformed into a parallel state through the space coordinate system transformation. Furthermore, a 2D nonlinear angle transfer function is developed to convert the differential capacitance into an angle, thereby mitigating the nonlinear errors resulting from large angles. Achieving an accuracy better than 0.014°, the measuring range expands from ±0.5729° (±10 mrad) to ±5.026° (± 87 mrad). Additionally, the capturing mode and tracking mode are proposed to monitor real-time angular changes of the M-SM with an accuracy of 0.017°. High-precision APSs have enhanced beam pointing accuracy and resolution and can thereby be used to advance the development of laser components, including light detection and ranging (LiDAR). [ABSTRACT FROM AUTHOR]

High-performance micro-electro-mechanical system (MEMS) gyrocompasses for north-finding systems have been very popular for decades. In this paper, a MEMS north-finding system (NFS) based on virtual maytagging (VM) is presented for the first time. In stark contrast to previous schemes of MEMS-based NFSs (e.g., carouseling, maytagging) and the abandoning rate table, we developed a honeycomb disk resonator gyroscope (HDRG) and two commercial accelerometers for azimuth detection. Instead of the physical rotation of the integrated turntable in traditional NFSs, the vibratory working modes of the HDRG are rotated periodically with electronic control to reduce the uncertainty in the azimuth. After systematically analyzing the principle of NFSs with VM, we designed tests to verify the practicability at the sensor level. A bias instability of 0.0078°/h can be obtained during one day with VM in an HDRG. We also implemented comparative north-finding experiments to further check our strategy at the system level. The accuracy in the azimuth can reach 0.204° for 5 min at 28.2° latitude with VM and 0.172° with maytagging. The results show that without any mechanical turning parts, VM technology makes it possible to develop high-precision handheld MEMS NFSs. [ABSTRACT FROM AUTHOR]

Flexible wearable sweat sensors allow continuous, real-time, noninvasive detection of sweat analytes, provide insight into human physiology at the molecular level, and have received significant attention for their promising applications in personalized health monitoring. Electrochemical sensors are the best choice for wearable sweat sensors due to their high performance, low cost, miniaturization, and wide applicability. Recent developments in soft microfluidics, multiplexed biosensing, energy harvesting devices, and materials have advanced the compatibility of wearable electrochemical sweat-sensing platforms. In this review, we summarize the potential of sweat for medical detection and methods for sweat stimulation and collection. This paper provides an overview of the components of wearable sweat sensors and recent developments in materials and power supply technologies and highlights some typical sensing platforms for different types of analytes. Finally, the paper ends with a discussion of the challenges and a view of the prospective development of this exciting field. [ABSTRACT FROM AUTHOR]

For simultaneous and quantitative thermophysical measurements of ultrasmall liquid volumes, we have recently developed and reported heated fluidic resonators (HFRs). In this paper, we improve the precision of HFRs in a vacuum by significantly reducing the thermal loss around the sensing element. A vacuum chamber with optical, electrical, and microfluidic access is custom-built to decrease the convection loss by two orders of magnitude under 10-4 mbar conditions. As a result, the measurement sensitivities for thermal conductivity and specific heat capacity are increased by 4.1 and 1.6 times, respectively. When differentiating between deionized water (H2O) and heavy water (D2O) with similar thermophysical properties and ~10% different mass densities, the signal-to-noise ratio (property differences over standard error) for H2O and D2O is increased by 9 and 5 times for thermal conductivity and specific heat capacity, respectively. [ABSTRACT FROM AUTHOR]

Liquid biopsy of cancers, detecting tumor-related information from liquid samples, has attracted wide attentions as an emerging technology. Our previously reported large-area PERFECT (Precise-Efficient-Robust-Flexible-Easy-Controllable-Thin) filter has demonstrated competitive sensitivity in recovering rare tumor cells from clinical samples. However, it is time-consuming and easily biased to manually inspect rare target cells among numerous background cells distributed in a large area (Φ ≥ 13 mm). This puts forward an urgent demand for rapid and bias-free inspection. Hereby, this paper implemented deep learning-based object detection for the inspection of rare tumor cells from large-field images of PERFECT filters with hematoxylin-eosin (HE)-stained cells recovered from bronchoalveolar lavage fluid (BALF). CenterNet, EfficientDet, and YOLOv5 were trained and validated with 240 and 60 image blocks containing tumor and/or background cells, respectively. YOLOv5 was selected as the basic network given the highest mAP@0.5 of 92.1%, compared to those of CenterNet and EfficientDet at 85.2% and 91.6%, respectively. Then, tricks including CIoU loss, image flip, mosaic, HSV augmentation and TTA were applied to enhance the performance of the YOLOv5 network, improving mAP@0.5 to 96.2%. This enhanced YOLOv5 network-based object detection, named as BALFilter Reader, was tested and cross-validated on 24 clinical cases. The overall diagnosis performance (~2 min) with sensitivity@66.7% ± 16.7%, specificity@100.0% ± 0.0% and accuracy@75.0% ± 12.5% was superior to that from two experienced pathologists (10–30 min) with sensitivity@61.1%, specificity@16.7% and accuracy@50.0%, with the histopathological result as the gold standard. The AUC of the BALFilter Reader is 0.84 ± 0.08. Moreover, a customized Web was developed for a user-friendly interface and the promotion of wide applications. The current results revealed that the developed BALFilter Reader is a rapid, bias-free and easily accessible AI-enabled tool to promote the transplantation of the BALFilter technique. This work can easily expand to other cytopathological diagnoses and improve the application value of micro/nanotechnology-based liquid biopsy in the era of intelligent pathology. [ABSTRACT FROM AUTHOR]

In this paper, we review the integration of microfluidic chips and computer vision, which has great potential to advance research in the life sciences and biology, particularly in the analysis of cell imaging data. Microfluidic chips enable the generation of large amounts of visual data at the single-cell level, while computer vision techniques can rapidly process and analyze these data to extract valuable information about cellular health and function. One of the key advantages of this integrative approach is that it allows for noninvasive and low-damage cellular characterization, which is important for studying delicate or fragile microbial cells. The use of microfluidic chips provides a highly controlled environment for cell growth and manipulation, minimizes experimental variability and improves the accuracy of data analysis. Computer vision can be used to recognize and analyze target species within heterogeneous microbial populations, which is important for understanding the physiological status of cells in complex biological systems. As hardware and artificial intelligence algorithms continue to improve, computer vision is expected to become an increasingly powerful tool for in situ cell analysis. The use of microelectromechanical devices in combination with microfluidic chips and computer vision could enable the development of label-free, automatic, low-cost, and fast cellular information recognition and the high-throughput analysis of cellular responses to different compounds, for broad applications in fields such as drug discovery, diagnostics, and personalized medicine. [ABSTRACT FROM AUTHOR]

This paper presents a surface acoustic wave (SAW) sensor based on coplanar integrated Langasite (LGS) that is fabricated using wet etching, high-temperature bonding, and ion beam etching (IBE) processes. The miniaturized multiparameter temperature‒pressure-humidity (TPH) sensor used the MXene@MoS2@Go (MMG) composite to widen the humidity detection range and improve the humidity sensitivity, including a fast response time (3.18 s) and recovery time (0.94 s). The TPH sensor was shown to operate steadily between 25–700 °C, 0–700 kPa, and 10–98% RH. Coupling issues among multiple parameters in complex environments were addressed by decoupling the Δf-temperature coupling factor to improve the accuracy. Therefore, this work can be applied to simultaneous measurements of several environmental parameters in challenging conditions. [ABSTRACT FROM AUTHOR]

Focused ultrasound (FUS) is a powerful tool widely used in biomedical therapy and imaging as well as in sensors and actuators. Conventional focusing techniques based on curved surfaces, metamaterial structures, and multielement phased arrays either present difficulties in massively parallel manufacturing with high precision or require complex drive electronics to operate. These difficulties have been addressed by microfabricated self-focusing acoustic transducers (SFATs) with Parylene air-cavity Fresnel acoustic lenses (ACFALs), which require a time-demanding step in removing the sacrificial layer. This paper presents three new and improved types of ACFALs based on polydimethylsiloxane (PDMS), an SU-8/PDMS bilayer, and SU-8, which are manufactured through simple sacrificial-layer-free microfabrication processes that are two to four times faster than that for the Parylene ACFALs. Moreover, by studying the effect of the lens thickness on the acoustic transmittance through the lens, the performance of the transducers has been optimized with improved thickness control techniques developed for PDMS and SU-8. As a result, the measured power transfer efficiency (PTE) and peak output acoustic pressure are up to 2.0 and 1.8 times higher than those of the Parylene ACFALs, respectively. The simple microfabrication techniques described in this paper are useful for manufacturing not only high-performance ACFALs but also other miniaturized devices with hollow or suspended structures for microfluidic and optical applications. [ABSTRACT FROM AUTHOR]

MEMS light detection and ranging (LiDAR) is becoming an indispensable sensor in vehicle environment sensing systems due to its low cost and high performance. The beam scanning trajectory, sampling scheme and gridding are the key technologies of MEMS LiDAR imaging. In Lissajous scanning mode, this paper improves the sampling scheme, through which a denser Cartesian grid of point cloud data at the same scanning frequency can be obtained. By summarizing the rules of the Cartesian grid, a general sampling scheme independent of the beam scanning trajectory patterns is proposed. Simulation and experiment results show that compared with the existing sampling scheme, the resolution and the number of points per frame are both increased by 2 times with the same hardware configuration and scanning frequencies for a MEMS scanning mirror (MEMS-SM). This is beneficial for improving the point cloud imaging performance of MEMS LiDAR. [ABSTRACT FROM AUTHOR]

Highly precise micromanipulation tools that can manipulate and interrogate cell organelles and components must be developed to support the rapid development of new cell-based medical therapies, thereby facilitating in-depth understanding of cell dynamics, cell component functions, and disease mechanisms. This paper presents a literature review on micro/nanomanipulation tools and their control methods for single-cell surgery. Micromanipulation methods specifically based on laser, microneedle, and untethered micro/nanotools are presented in detail. The limitations of these techniques are also discussed. The biological significance and clinical applications of single-cell surgery are also addressed in this paper. [ABSTRACT FROM AUTHOR]

During cardiac development, mechanotransduction from the in vivo microenvironment modulates cardiomyocyte growth in terms of the number, area, and arrangement heterogeneity. However, the response of cells to different degrees of mechanical stimuli is unclear. Organ-on-a-chip, as a platform for investigating mechanical stress stimuli in cellular mimicry of the in vivo microenvironment, is limited by the lack of ability to accurately quantify externally induced stimuli. However, previous technology lacks the integration of external stimuli and feedback sensors in microfluidic platforms to obtain and apply precise amounts of external stimuli. Here, we designed a cell stretching platform with an in-situ sensor. The in-situ liquid metal sensors can accurately measure the mechanical stimulation caused by the deformation of the vacuum cavity exerted on cells. The platform was applied to human cardiomyocytes (AC16) under cyclic strain (5%, 10%, 15%, 20 and 25%), and we found that cyclic strain promoted cell growth induced the arrangement of cells on the membrane to gradually unify, and stabilized the cells at 15% amplitude, which was even more effective after 3 days of culture. The platform's precise control and measurement of mechanical forces can be used to establish more accurate in vitro microenvironmental models for disease modeling and therapeutic research. [ABSTRACT FROM AUTHOR]

Thin-film PMUTs have been important research topics among microultrasound experts, and a concise review on their research progress is reported herein. Through rigorous surveying, scrutinization, and perception, it has been determined that the work in this field began nearly 44 years ago with the primitive development of functional piezoelectric thin-film materials. To date, there are three major companies commercializing thin-film PMUTs on a bulk scale. This commercialization illustrates the extensive contributions made by more than 70 different centers, research institutes, and agencies across 4 different continents regarding the vast development of these devices' design, manufacturing, and function. This review covers these important contributions in a short yet comprehensive manner; in particular, this paper educates readers about the global PMUT outlook, their governing design principles, their manufacturing methods, nonconventional yet useful PMUT designs, and category-wise applications. Crucial comparison charts of thin-film piezoelectric material used in PMUTs, and their categorically targeted applications are depicted and discussed to enlighten any MEMS designer who plans to work with PMUTs. Moreover, each relevant section features clear future predictions based on the author's past knowledge and expertise in this field of research and on the findings of a careful literature survey. In short, this review is a one-stop time-efficient guide for anyone interested in learning about these small devices. [ABSTRACT FROM AUTHOR]

Micron- and submicron-sized droplets have extensive applications in biomedical diagnosis and drug delivery. Moreover, accurate high-throughput analysis requires a uniform droplet size distribution and high production rates. Although the previously reported microfluidic coflow step-emulsification method can be used to generate highly monodispersed droplets, the droplet diameter (d) is constrained by the microchannel height (b), d ≳ 3 b , while the production rate is limited by the maximum capillary number of the step-emulsification regime, impeding emulsification of highly viscous liquids. In this paper, we report a novel, gas-assisted coflow step-emulsification method, where air serves as the innermost phase of a precursor hollow-core air/oil/water emulsion. Air gradually diffuses out, producing oil droplets. The size of the hollow-core droplets and the ultrathin oil layer thickness both follow the scaling laws of triphasic step-emulsification. The minimal droplet size attains d ≈ 1.7 b , inaccessible in standard all-liquid biphasic step-emulsification. The production rate per single channel is an order-of-magnitude higher than that in the standard all-liquid biphasic step-emulsification and is also superior to alternative emulsification methods. Due to low gas viscosity, the method can also be used to generate micron- and submicron-sized droplets of high-viscosity fluids, while the inert nature of the auxiliary gas offers high versatility. [ABSTRACT FROM AUTHOR]

In this paper, an electrostatic compliant mechanical amplifier intended for force-compensated displacement amplification in MEMS sensor applications is described. Usually, mechanical transformers that enhance a small input displacement into a large output displacement generate large forces at the input of the transformer. The microsystem proposed here allows for the reduction and compensation of the input stiffness of the amplifier and any mechanical components connected to it while providing a constant amplification ratio at the same time. The amplifying mechanism features bidirectional electrostatic anti-springs enabling the control of the stiffness by applying a constant DC voltage. The electrode design of the anti-springs and its influence on the force-displacement characteristic, the side instability and the maximal displacement are studied through analytical approaches and supported by FEA and by experiments. Based on the derived models, a compliant electromechanical amplifier is developed, featuring an amplification ratio of 50. For this amplifier the initial input stiffness of 422 N/m could be reduced to 6.8 N/m by applying a voltage of 100 V. As an additional application, we show how the amplifier can be used as a mechanical force sensor with tuneable sensitivity, where the forces at the input are transformed into large output displacements. Through experiments, we show how the sensitivity can be adjusted and increased by a factor of 25 by applying a voltage at the anti-springs. [ABSTRACT FROM AUTHOR]

Immunoglobulin M (IgM) and immunoglobulin G (IgG) antibodies are important biomarkers used for the diagnosis and screening of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infections in both symptomatic and asymptomatic individuals. These antibodies are highly specific to the spike (S) and nucleocapsid (N) proteins of the SARS-CoV-2 virus. This paper outlines the development steps of a novel hybrid (vertical-lateral-vertical) flow assay in the form of a finger-stick point-of-care device, similar to an adhesive bandage, designed for the timely detection and screening of IgM and IgG immune responses to SARS-CoV-2 infections. The assay, comprising a vertically stacked plasma/serum separation membrane, conjugate pad, and detection (readout) zone, utilizes gold nanoparticles (AuNPs) conjugated with SARS-CoV-2 S and N proteins to effectively capture IgM and IgG antibodies from a pinprick (~15 µL) of blood in just one step and provides results of no immune IgM−/IgG−, early immune IgM+/IgG−, active immune IgM+/IgG+ or immune IgM−/IgG+ in a short amount of time (minutes). The adhesive bandage-like construction is an example of the design of rapid, low-cost, disposable, and easy-to-use tests for large-scale detection and screening in households. Furthermore, the bandage can be easily adjusted and optimized to detect different viral infections as they arise by simply selecting appropriate antigens related to pandemics and outbreaks. [ABSTRACT FROM AUTHOR]

Acoustic sensors with ultrahigh sensitivity, broadband response, and high resolution are essential for high-precision nondestructive weak signal detection technology. In this paper, based on the size effect of an ultrahigh-quality (Q) calcium fluoride (CaF2) resonator, a weak acoustic signal is detected by the dispersive response regime in which an acoustic, elastic wave modulates the geometry and is converted to a resonance frequency shift. Through the structural design of the resonator, the sensitivity reaches 11.54 V/Pa at 10 kHz in the experiment. To our knowledge, the result is higher than that of other optical resonator acoustic sensors. We further detected a weak signal as low as 9.4 µPa/Hz1/2, which greatly improved the detection resolution. With a good directionality of 36.4 dB and a broadband frequency response range of 20 Hz–20 kHz, the CaF2 resonator acoustic sensing system can not only acquire and reconstruct speech signals over a long distance but also accurately identify and separate multiple voices in noisy environments. This system shows high performance in weak sound detection, sound source localization, sleep monitoring, and many other voice interaction applications. [ABSTRACT FROM AUTHOR]

Ingestible capsules have the potential to become an attractive alternative to traditional means of treating and detecting gastrointestinal (GI) disease. As device complexity increases, so too does the demand for more effective capsule packaging technologies to elegantly target specific GI locations. While pH-responsive coatings have been traditionally used for the passive targeting of specific GI regions, their application is limited due to the geometric restrictions imposed by standard coating methods. Dip, pan, and spray coating methods only enable the protection of microscale unsupported openings against the harsh GI environment. However, some emerging technologies have millimeter-scale components for performing functions such as sensing and drug delivery. To this end, we present the freestanding region-responsive bilayer (FRRB), a packaging technology for ingestible capsules that can be readily applied for various functional ingestible capsule components. The bilayer is composed of rigid polyethylene glycol (PEG) under a flexible pH-responsive Eudragit® FL 30 D 55, which protects the contents of the capsule until it arrives in the targeted intestinal environment. The FRRB can be fabricated in a multitude of shapes that facilitate various functional packaging mechanisms, some of which are demonstrated here. In this paper, we characterize and validate the use of this technology in a simulated intestinal environment, confirming that the FRRB can be tuned for small intestinal release. We also show a case example where the FRRB is used to protect and expose a thermomechanical actuator for targeted drug delivery. [ABSTRACT FROM AUTHOR]

The application of single-crystal silicon (SCS) nanopore structures in single-molecule-based analytical devices is an emerging approach for the separation and analysis of nanoparticles. The key challenge is to fabricate individual SCS nanopores with precise sizes in a controllable and reproducible way. This paper introduces a fast-stop ionic current-monitored three-step wet etching (TSWE) method for the controllable fabrication of SCS nanopores. Since the nanopore size has a quantitative relationship with the corresponding ionic current, it can be regulated by controlling the ionic current. Thanks to the precise current-monitored and self-stop system, an array of nanoslits with a feature size of only 3 nm was obtained, which is the smallest size ever reported using the TSWE method. Furthermore, by selecting different current jump ratios, individual nanopores of specific sizes were controllably prepared, and the smallest deviation from the theoretical value was 1.4 nm. DNA translocation measurement results revealed that the prepared SCS nanopores possessed the excellent potential to be applied in DNA sequencing. [ABSTRACT FROM AUTHOR]