Search

Microparts are more and more mass products and quality assurance becomes an important factor in manufacturing. Based on a new optical principle, a tool was developed and tested which is well suited for easy non-destructive measurements at microstructures as well as for measurement at transparent layers. Thickness measurement of ca. 1 mm ultrathick photoresist layers on non-patterned high-reflective gold surface was demonstrated. As well, measurement of multi layer systems consisting of each several hundred micrometers thick transparent layers was verified at capped microfluidic channel structures.

In a close collaboration the team of Micromotion, micro resist technology, BESSY, and LSU-CAMD have successfully mastered the challenges of LIGA production of ultra-precision microparts for Micro Harmonic Drive® gears. The complementary expertise ranging from design and application know-how to process research and technical support resulted in high quality LIGA microparts and superior Micro Harmonic Drive® gears taking advantages of the free 2D design capability and material choice. It is also an excellent example that through contributions from partners with different background and expertise LIGA precision parts can be produced with high quality and yield and for a market competitive price.

First promising investigations of SU-8 removal experiments with a novel plasma etching technique are presented. The basic idea of this technique is to separate the highly effective generation of chemical radicals (e.g. oxygen radicals) using a traveling wave reactor (TWR) microwave source with water cooled plasma zone from the chemical reaction with the resist polymer. The etching tool operates in a remote and downstream mode with very high radical density allowing precise thermal management of the substrates on the chuck giving controlled process conditions without deviation in temperature, and generally preventing ion bombardment, at least resulting in gentle processing without jeopardizing the integrity of the metal structures. Very good removal of SU-8 with very few residues and very high etching rates up to 10 μm per minute are observed in first experiments which are offering chances to get even more than 20 μm per minute. The etching process is isotropic, and the rate stays stable during the whole removing process even for very thick films of 1 mm and more. First application examples of SU-8 removal are demonstrating the great potential of the presented microwave plasma based technique not only for the cleaning of metallic microparts but also for other more sensitive materials which is demonstrated by SU-8 removal from graphite X-ray mask substrates.

A case study of use of negative type SU-8 X-ray sensitive resist for fabrication of advanced, highly precise, ultra tall direct LIGA mechanical microparts is presented in this paper. Using direct LIGA technique, ∼1 mm tall highly precise metallic gear wheels are being fabricated, previously using PMMA based process. Starting from a non-optimized non-satisfying SU-8 process, significant process parameters for process optimization were identified using statistical design of experiment. By varying the significant process parameters, SU-8 process was further optimized with respect to critical aspect of sidewall bow and tilt of metallic structures. After the optimization, metallic parts fabricated using SU-8 process showed comparable quality as those fabricated using PMMA based process.

LIGA is the basic idea of promising developments for the manufacturing of microelectromechanical system parts containing high aspect ratio microstructures. Aim of the work is a brief discussion of the starting-points for inline process inspection within a direct LIGA technology using deep X-ray lithography for the production of micromechanical gear wheels with critical dimensions of ∼35 μm width at ∼1 mm height as well as to show methodic and technical measuring possibilities. Firstly, results of the determination of residual solvent content distribution within ultra-thick SU-8 films are shown obtained from refracted near field optical measurements. Furthermore, the capability of X-ray computer tomographic imaging is discussed and measurements for the determination of the three-dimensional shape of high aspect ratio microstructures are practically demonstrated with microscopic and interferometric optical methods. Finally, first results demonstrate the potential of the optical coherence tomography for several further important measurement tasks, among others, e.g. for the imaging of the distribution of mechanical stress at the resist–substrate interface. The results show that much information which is essential in the LIGA process can be achieved with recently available measurement methods. However, further development of non-destructive measurement techniques would be desirable for an effective inline process control of mass production of micromechanical parts.