Search

Scanning electron microscopy (SEM) is a precious tool in materials science and morphology sciences, enabling detailed examination of materials at the nanoscale. However, precise and accurate sample repositioning during different observation sessions remains a significant challenge, impacting the quality and repeatability of SEM analyses. This study aimed to develop and evaluate a LEGO®-based sample positioning system for SEM analysis. The system was designed to consistently identify and align features across multiple repositioning cycles, maintain accurate positioning along the z-axis, minimize distortion, and provide repeatable and reliable results. The results indicated a high degree of precision and accuracy in the repositioning process, as evidenced by the minimal displacements, deviations in scaling and shearing, and the highly significant results (p < 0.001) obtained from the analysis of absolute translations and rotations. Moreover, the analyses were consistently replicated across six repetitions, underscoring the reliability of the observed results. While the findings suggest that the LEGO-based sample positioning system is promising for enhancing SEM analyses' quality and repeatability, further studies are needed to optimize the system's design and evaluate its performance in different SEM applications. Ultimately, this study contributes to the ongoing efforts to develop cost-effective, customizable, and accurate solutions for sample positioning in SEM, contributing to the advancement of materials science research and all SEM analysis requiring overtime observations of the same sample. RESEARCH HIGHLIGHTS: This study focused on the development and evaluation of a novel LEGO-based sample positioning system specifically designed for SEM analysis. One of the standout features of this system is its ability to consistently identify and align features across multiple repositioning cycles, showcasing its precision and reliability. To further understand the mechanical aspects of the SEM stage, we employed the Rambold Kontroll comparator, which provided a baseline understanding of its mechanical tolerance. The registration process results were particularly noteworthy, as they revealed high accuracy with minimal displacements. Furthermore, the consistent outcomes observed across multiple repetitions emphasize the reliability and robustness of the methods we employed in this research., (© 2023 The Authors. Microscopy Research and Technique published by Wiley Periodicals LLC.)

This study compares the skeletal calcification pattern of batoid Raja asterias with the endochondral ossification model of mammalians Homo sapiens and teleost Xiphias gladius. Skeletal mineralization serves to stiffen the mobile elements for locomotion. Histology, histochemistry, heat deproteination, scanning electron microscopy (SEM)/EDAX analysis, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and Fourier transform infrared spectrometry (FTIR) have been applied in the study. H. sapiens and X. gladius bone specimens showed similar profiles, R. asterias calcified cartilage diverges for higher water release and more amorphous bioapatite. In endochondral ossification, fetal calcified cartilage is progressively replaced by bone matrix, while R. asterias calcified cartilage remains un-remodeled throughout the life span. Ca 2+ and PO 4 3- concentration in extracellular matrix is suggested to reach the critical salts precipitation point through H 2 O recall from extracellular matrix into both chondroblasts or osteoblasts. Cartilage organic phase layout and incomplete mineralization allow interstitial fluids diffusion, chondrocytes survival, and growth in a calcified tissue lacking of a vascular and canalicular system. HIGHLIGHTS: Comparative physico-chemical characterization (TGA, DTG and DSC) testifies the mass loss due to water release, collagen and carbonate decomposition of the three tested matrices. R. asterias calcified cartilage water content is higher than that of H. sapiens and X. gladius, as shown by the respectively highest dehydration enthalpy values. Lower crystallinity degree of R. asterias calcified cartilage can be related to the higher amount of collagen in amorphous form than in bone matrix. These data can be discussed in terms of the mechanostat theory (Frost, 1966) or by organic/inorganic phase transformation in the course evolution from fin to limbs. Mineral analysis documented different charactersof R. asterias vs H. sapiens and X. gladius calcified matrix., (© 2023 The Authors. Microscopy Research and Technique published by Wiley Periodicals LLC.)

The relationship between cartilage growth - mineralization patterns were studied in adult Rajidae with X-ray morphology/morphometry, undecalcified resin-embedded, heat-deproteinated histology and scanning electron microscopy. Morphometry of the wing-fins, nine central rays of the youngest and oldest specimens documented a significant decrement of radials mean length between inner, middle and outer zones, but without a regular progression along the ray. This suggests that single radial length growth is regulated in such a way to align inter-radial joints parallel to the wing metapterygia curvature. Trans-illumination and heat-deproteination techniques showed polygonal and cylindrical morphotypes of tesserae, whose aligned pattern ranged from mono-columnar, bi-columnar, and multi-columnar up to the crustal-like layout. Histology of tessellated cartilage allowed to identify of zones of the incoming mineral deposition characterized by enhanced duplication rate of chondrocytes with the formation of isogenic groups, whose morphology and topography suggested a relationship with the impending formation of the radials calcified column. The morphotype and layout of radial tesserae were related to mechanical demands (stiffening) and the size/mass of the radial cartilage body. The cartilage calcification pattern of the batoids model shares several morphological features with tetrapods' endochondral ossification, that is, (chondrocytes' high duplication rate, alignment in rows, increased volume of chondrocyte lacunae), but without the typical geometry of the metaphyseal growth plates. RESEARCH HIGHLIGHTS: 1. The wing-fins system consists of stiff radials, mobile inter-radial joints and a flat inter-radial membrane adapted to the mechanical demand of wing wave movement. 2. Growth occurs by forming a mixed calcified-uncalcified cartilage texture, developing intrinsic tensional stresses documented by morphoanatomical data., (© 2022 The Authors. Microscopy Research and Technique published by Wiley Periodicals LLC.)

The free surface of the articular cartilage must withstand compressive and shearing forces, maintain a low friction coefficient and allow oxygen and metabolites to reach the underlying matrix. In many ways it is critical to the physiology of the whole tissue and its disruption always involves deep pathological alterations and loss of the joint integrity. Being very difficult to image with section-based conventional techniques, it was often described by previous research in conflicting terms or entirely overlooked. High-magnification face-on observations with high resolution scanning electron microscopy and with scanning probe microscopy revealed a very thin, delicate superficial layer rich in glycoconjugates, which may explain the very low friction coefficient of the tissue but which was very easily altered and/or dissolved in the preparation. Beneath this superficial sheet lies a thicker coat of thin, highly uniform, slightly wavy collagen fibrils lying parallel to the surface and mutually interconnected by a huge number of interfibrillar glycosaminoglycan bridges. These bridges and the collagen fibrils form an extended reticular structure able to redistribute tensile and compressive stress across a larger area of the surface and hence a greater volume of tissue., (© 2020 Wiley Periodicals LLC.)