Search

The environment preservation has been an important motivation to find alternative, functional, and biodegradable materials to replace polluting petrochemicals. The production of nonbiodegradable face masks increased the concentration of microplastics in the environment, highlighting the need for sustainable alternatives, such as the use of local by-products to create efficient and eco-friendly filtering materials. Furthermore, the use of smart materials can reduce the risk of contagion and virus transmission, especially in the face of possible mutations. The development of novel materials is necessary to ensure less risk of contagion and virus transmission, as well as to preserve the environment. Taking these factors into account, 16 systems were developed with different combinations of precursor materials (holocellulose, polyaniline [ES-PANI], graphene oxide [GO], silver nanoparticles [AgNPs], and activated carbon [AC]). Adsorption tests of the spike protein showed that the systems containing GO and AC were the most efficient in the adsorption process. Similarly, plate tests conducted using the VSV-IN strain cultured in HepG2 cells showed that the system containing all phases showed the greatest reduction in viral titer method. In agreement, the biocompatibility tests showed that the compounds extracted from the systems showed low cytotoxicity or no significant cytotoxic effect in human fibroblasts. As a result, the adsorption tests of the spike protein, viral titration, and biocompatibility tests showed that systems labeled as I and J were the most efficient. In this context, the present research has significantly contributed to the technological development of antiviral systems, with improved properties and increased adsorption efficiency, reducing the viral titer and contributing efficiently to public health. In this way, these alternative materials could be employed in sensors and devices for filtering and sanitization, thus assisting in mitigating the transmission of viruses and bacteria. RESEARCH HIGHLIGHTS: Sixteen virus adsorbent systems were developed with different combinations of precursor materials (holocellulose, polyaniline (ES-PANI), graphene oxide (GO), silver nanoparticles (AgNPs), and activated carbon (AC)). The system that included all of the nanocomposites holocellulose, PANI, GO, AgNPs, and AC showed the greatest reduction in viral titration. The biocompatibility tests revealed that all systems caused only mild or moderate cytotoxicity toward human fibroblasts., (© 2024 Wiley Periodicals LLC.)

In this study, the morphological properties and micro-roughness of chromium thin film prepared by thermal evaporation technique and confirmed via EDS analysis are examined on different substrates of BK7, Silicon (Si), and glass using atomic force microscope analysis (AFM). Analysis of amplitude parameters, Minkowski functionals, and films' spatial microtexture extracted from AFM analysis showed the difference between glass substrate and the other two (BK7 and Si) substrates for the growth of chromium thin films. In addition, we observed robust signatures of multifractality of the Cr thin films deposited on all substrates we studied. Moreover, we highlight that the Glass substrates displayed the strongest multifractality indicating that such samples present space filling properties distributed over more spatial scales than the samples of BK7 and Si., (© 2022 Wiley Periodicals LLC.)

Utilizing a plasma focus (PF) instrument, magnesium nitride (Mg 3 N 2 ) thin films were synthesized on stainless steel substrates. Twenty five optimum focus shots at 8 cm distance from the anode tip were used to deposit the films at different angular positions regarded to the anode axis. Scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray diffraction (XRD) analyses were performed to assess the surface morphology and structural characteristics of Mg 3 N 2 films. Based on AFM images, these films were studied to understand the effect of angular position variation on their surfaces through morphological and fractal parameters. By increasing the angle, we verify that the grain size decreased from 130(0) nm to 75(5) nm and also the mean quadratic surface roughness of the films reduced in its average values from (28.97 ± 3.24) nm to (23.10 ± 1.34) nm. Power spectrum density analysis indicated that films become more self-affine at larger angles. Furthermore, the corrosion behavior of the films was investigated through a potentiodynamic polarization test in H 2 SO 4 solution. It was found that the ion energy and flux, varying with the angular positions from the anode tip, directly affected the nanostructured roughness and surface morphology of the samples. The electrochemical studies of films show that the uncoated sample presented the lowest corrosion resistance. The highest corrosion resistance was obtained for the sample deposited with 25 optimum shots and at 0° angular position reaching a reduction in the corrosion current density of almost 800 times compared to the pure stainless steel-304 substrate. HIGHLIGHTS: Mg 3 N 2 /SS films have been deposited at different angles by plasma focus (PF) instruments. The effect of angular position on the surface microtexture, morphological parameters, and corrosion features of the films was studied. The RBS measurement and X-ray diffraction are utilized to identify the crystalline phases and thickness of films., (© 2022 Wiley Periodicals LLC.)

In this work, the topographical effect of the scratching trajectory and the feed direction on the formation of lithographed lines on the (001) InP surface was investigated using an atomic force microscope (AFM) tip-based nanomachining approach. Nanoscratching tests were carried out using the sharp face of a diamond AFM tip in contact mode. From the topographic maps obtained by AFM, several morphological and fractal parameters were obtained and analyzed. Surface morphology presented a surface smoothing for surfaces with scratches produced in [011] and [001] directions. The height parameters confirmed this behavior because scratches in [001] direction exhibited lower roughness. Moreover, this scratch direction promoted the height distribution most symmetrical and platykurtic. The other morphological parameters revealed that this direction provided a more irregular surface (smaller S mc and S xp ), peak distribution, denser and pointed, smaller portion of material in the core, less deep furrows, higher spatial frequency components, and high isotropy. Fractal parameters revealed that FRE90 has the highest spatial complexity, it is dominated by higher spatial frequencies, and has the lowest surface percolation. Furthermore, all samples exhibited high topographic uniformity., (© 2021 Wiley Periodicals LLC.)

A study of image analysis of Ti 1-x Al x N films deposited on corning glass substrates by a direct current (DC)/radio frequency (RF) magnetron sputtering system was performed. Atomic force microscopy (AFM) data were studied to understand how the impact of the concentration of Al content influences the 3D surface morphology as well as the surface texture parameters. The results showed that the superficial morphology was modified by the increase of Al content in the Ti 1-x Al x N films, as well as the surface microtexture. It has also been observed that the Ti 1-x Al x N film surface with the highest aluminum (Al) doping concentration presented a similar surface morphology to pristine titanium nitride (TiN) thin films. The Abbott-Firestone curves for all films exhibited an S-like shape suggesting topographic uniformity and Gaussian distribution of heights. An increase in surface uniformity is observed with Al concentration. The characterization of the surface morphology of Ti 1-x Al x N films by the evaluation of surface statistical parameters suggests that the surface topography can be adjusted by suitable doping of aluminum and offers a deeper understanding of the applicability of these films., (© 2021 Wiley Periodicals LLC.)

Dinizia excelsa Ducke under three different cut conditions were carefully analyzed. The morphology and stereometry of different wood cutting surfaces (longitudinal radial, longitudinal tangential, and transversal) were studied by SEM and AFM. The results obtained in this study suggest that both the height parameters and the advanced stereometric parameters of the surfaces did not reveal a significant difference, indicating that the spatial patterns do not change according to the type of cut. In this way, the surface microtexture does not vary depending on the cut type. Similarly, the Hurst's coefficients did not show any significant difference in the spectrum of the PSD fractal region. On the other hand, Minkowski functionals presented a morphological difference between the samples. These results showed that the microtexture of the wood surface does not change as a function of the type of cut submitted to the same polishing process., (© 2021 Wiley Periodicals LLC.)

Kefir is a probiotic that has several health promising properties. Its grains can form microbial films on different types of substrates. In the present work, the surface characteristics of kefir biofilms associated with Maytenus rigida Mart. extract were minutely studied. Three different concentrations of plant extract were included in the biofilm forming solutions, where fresh grains of kefir were inoculated. The results showed that the plant extract was successfully incorporated into the exopolysaccharide matrix of the biofilm. The main chemical components found linked to the plant extract were triterpenes. The crystallinity of biofilms increased with the addition of the plant extract. The morphology revealed that at low concentrations of the extract there was a prevalence of lactobacilli, while at high concentrations yeasts were more observed. Adhesion and wettability were higher for biofilm with less extract. These results revealed that a combination of plant extract and kefir's exopolysaccharide could form biofilms with chemical and topographic properties of great interest in regenerative medicine., (© 2020 Wiley Periodicals LLC.)

The aim of this study was to report the first discussion of statistical parameters and possible applications related to the surface of kefir biofilms prepared with Maytenus rigida Mart. extract through micromorphology, using atomic force microscopy (AFM). Four different samples were produced. The reference contained demerara sugar with a concentration of 40 g/L and the others had added extract whose concentrations were 0.25, 0.50, and 0.75 g/L, respectively. AFM was used to image the surface in tapping mode, on square areas of 30 μm × 30 μm. Images were studied by the MountainsMap premium commercial software. The main parameter of the surface, roughness, grew with the increase of the extract concentration up to 0.50 g/L. In addition, asymmetry and kurtosis showed that the biofilm with the best peak distribution was the one with 0.25 g/L of plant extract. The other parameters followed the main results for the surface and were observed for the depth and volume parameters. The power spectrum density spectrum confirmed the reliability of the results for the sample with 0.25 g/L. Therefore, the sample with 0.25 g/L of plant extract produced the best balance in relation to the surface properties. These results showed that the biofilm morphology and microtexture were affected by the incorporation of the plant extract and can be useful to define possible applications., (© 2020 Wiley Periodicals LLC.)