Search

A highly uniform spherical MoO2-MoO3/polypyrrole core-shell nanocomposite has been successfully synthesized as an optoelectronic photon sensing material, capable of detecting light in the UV, Vis, and IR domains. The nanocomposite is prepared through the oxidation of pyrrole using Na2MoO4, resulting in a uniform spherical morphology that has been confirmed by TEM, theoretical modeling, and SEM analyses. This morphology contributes to its promising optical behavior, characterized by a small bandgap of 1.36 eV. The optoelectronic photosensing capability of the nanocomposite has been evaluated across the UV, Vis, and IR spectra, demonstrating high efficiency. The photoresponsivity R values indicate the ability of the nanocomposite to generate hot electrons in response to incident photons. With an R value of 4.15 mA·W−1 at 440 nm, this optoelectronic device exhibits considerable promise for integration into an advanced technological apparatus. The detection (D) value of 9.30 × 108 Jones at 440 nm further confirms the high sensitivity in the Vis region. The excellent stability of the device can be attributed to the inherent MoO2-MoO3 oxide and Ppy polymer materials. This stability has been demonstrated through reproducibility studies and current-voltage measurements under various optical conditions. The combination of stability, efficiency, and sensitivity makes this optoelectronic device well suited for light sensing applications in both industrial and commercial settings. Its promising performance opens up opportunities for advancements in various fields requiring accurate and reliable light detection. [ABSTRACT FROM AUTHOR]

A highly uniform spherical MoO2-MoO3/polypyrrole core-shell nanocomposite has been successfully synthesized as an optoelectronic photon sensing material, capable of detecting light in the UV, Vis, and IR domains. The nanocomposite is prepared through the oxidation of pyrrole using Na2MoO4, resulting in a uniform spherical morphology that has been confirmed by TEM, theoretical modeling, and SEM analyses. This morphology contributes to its promising optical behavior, characterized by a small bandgap of 1.36 eV. The optoelectronic photosensing capability of the nanocomposite has been evaluated across the UV, Vis, and IR spectra, demonstrating high efficiency. The photoresponsivity R values indicate the ability of the nanocomposite to generate hot electrons in response to incident photons. With an R value of 4.15 mA·W−1 at 440 nm, this optoelectronic device exhibits considerable promise for integration into an advanced technological apparatus. The detection (D) value of 9.30 × 108 Jones at 440 nm further confirms the high sensitivity in the Vis region. The excellent stability of the device can be attributed to the inherent MoO2-MoO3 oxide and Ppy polymer materials. This stability has been demonstrated through reproducibility studies and current-voltage measurements under various optical conditions. The combination of stability, efficiency, and sensitivity makes this optoelectronic device well suited for light sensing applications in both industrial and commercial settings. Its promising performance opens up opportunities for advancements in various fields requiring accurate and reliable light detection.

In this work, we investigate the surface transfer doping process that is induced between hydrogen-terminated (100) diamond and the metal oxides, MoO3 and V2O5, through simulation using a semi-empirical Density Functional Theory (DFT) method. DFT was used to calculate the band structure and charge transfer process between these oxide materials and hydrogen terminated diamond. Analysis of the band structures, density of states, Mulliken charges, adsorption energies and position of the Valence Band Minima (VBM) and Conduction Band Minima (CBM) energy levels shows that both oxides act as electron acceptors and inject holes into the diamond structure. Hence, those metal oxides can be described as p-type doping materials for the diamond. Additionally, our work suggests that by depositing appropriate metal oxides in an oxygen rich atmosphere or using metal oxides with high stochiometric ration between oxygen and metal atoms could lead to an increase of the charge transfer between the diamond and oxide, leading to enhanced surface transfer doping.

A series of ultralong (up to tens of micrometers) MoO3 nanowire-based membranes were synthesized for the treatment of aqueous solutions containing the cationic dyes methylene blue (MB) and rhodamine B (RhB). This treatment method possesses extremely rapid and superhigh adsorbability (up to 521 and 321 mg/g for MB and RhB, respectively), as well excellent selective adsorption ability of cationic dyes with respect to the anionic dye methyl orange (MO). Moreover, the cationic dyes on the membrane can be desorbed easily, and reusability is good.

Molybdenum oxide (MoO3) and Fe,Co-codoped MoO3 thin films obtained by spray pyrolysis have been in-depth investigated to understand the effect of Co and Fe codoping on MoO3 thin films. The effect of Fe and Co on the structural, morphological and optical properties of MoO3 thin films have been studied using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy-dispersive X-ray analysis (EDAX), optical and photoluminescence (PL) spectroscopy, and electropyroelectric methods. The XRD patterns demonstrated the formation of orthorhombic α-MoO3 by spray pyrolysis. SEM characterization has shown an increase in roughness of MoO3 thin films by Fe and Co doping. Optical reflectance and transmittance measurements have shown an increase in optical band gap with the increase in Fe and Co contents. Thermal conductivity and thermal diffusivity of Fe,Co-doped MoO3 were 24.10⁻25.86 Wm−1K−1 and 3.80 × 10−6⁻5.15 × 10−6 m2s−1, respectively. MoO3 thin films have shown PL emission. Doping MoO3 with Fe and Co increases emission in the visible range due to an increase number of chemisorbed oxygen atoms. The photodegradation of an aqueous solution of methylene blue (MB) depended on the content of the codoping elements (Fe,Co). The results showed that a degradation efficiency of 90% was observed after 60 min for MoO3: Fe 2%-Co 1%, while the degradation efficiency was about 35% for the undoped MoO3 thin film.

In this work, we investigate the surface transfer doping process that is induced between hydrogen-terminated (100) diamond and the metal oxides, MoO3 and V2O5, through simulation using a semi-empirical Density Functional Theory (DFT) method. DFT was used to calculate the band structure and charge transfer process between these oxide materials and hydrogen terminated diamond. Analysis of the band structures, density of states, Mulliken charges, adsorption energies and position of the Valence Band Minima (VBM) and Conduction Band Minima (CBM) energy levels shows that both oxides act as electron acceptors and inject holes into the diamond structure. Hence, those metal oxides can be described as p-type doping materials for the diamond. Additionally, our work suggests that by depositing appropriate metal oxides in an oxygen rich atmosphere or using metal oxides with high stochiometric ration between oxygen and metal atoms could lead to an increase of the charge transfer between the diamond and oxide, leading to enhanced surface transfer doping. [ABSTRACT FROM AUTHOR]

In this work, we investigate the surface transfer doping process that is induced between hydrogen-terminated (100) diamond and the metal oxides, MoO 3 and V 2 O 5 , through simulation using a semi-empirical Density Functional Theory (DFT) method. DFT was used to calculate the band structure and charge transfer process between these oxide materials and hydrogen terminated diamond. Analysis of the band structures, density of states, Mulliken charges, adsorption energies and position of the Valence Band Minima (VBM) and Conduction Band Minima (CBM) energy levels shows that both oxides act as electron acceptors and inject holes into the diamond structure. Hence, those metal oxides can be described as p-type doping materials for the diamond. Additionally, our work suggests that by depositing appropriate metal oxides in an oxygen rich atmosphere or using metal oxides with high stochiometric ration between oxygen and metal atoms could lead to an increase of the charge transfer between the diamond and oxide, leading to enhanced surface transfer doping., Competing Interests: The authors declare no conflict of interest. The funders had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript, or in the decision to publish the results.

A series of ultralong (up to tens of micrometers) MoO3 nanowire-based membranes were synthesized for the treatment of aqueous solutions containing the cationic dyes methylene blue (MB) and rhodamine B (RhB). This treatment method possesses extremely rapid and superhigh adsorbability (up to 521 and 321 mg/g for MB and RhB, respectively), as well excellent selective adsorption ability of cationic dyes with respect to the anionic dye methyl orange (MO). Moreover, the cationic dyes on the membrane can be desorbed easily, and reusability is good. [ABSTRACT FROM AUTHOR]

Molybdenum oxide (MoO3) and Fe,Co-codoped MoO3 thin films obtained by spray pyrolysis have been in-depth investigated to understand the effect of Co and Fe codoping on MoO3 thin films. The effect of Fe and Co on the structural, morphological and optical properties of MoO3 thin films have been studied using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy-dispersive X-ray analysis (EDAX), optical and photoluminescence (PL) spectroscopy, and electropyroelectric methods. The XRD patterns demonstrated the formation of orthorhombic α-MoO3 by spray pyrolysis. SEM characterization has shown an increase in roughness of MoO3 thin films by Fe and Co doping. Optical reflectance and transmittance measurements have shown an increase in optical band gap with the increase in Fe and Co contents. Thermal conductivity and thermal diffusivity of Fe,Co-doped MoO3 were 24.10–25.86 Wm−1K−1 and 3.80 × 10−6–5.15 × 10−6 m2s−1, respectively. MoO3 thin films have shown PL emission. Doping MoO3 with Fe and Co increases emission in the visible range due to an increase number of chemisorbed oxygen atoms. The photodegradation of an aqueous solution of methylene blue (MB) depended on the content of the codoping elements (Fe,Co). The results showed that a degradation efficiency of 90% was observed after 60 min for MoO3: Fe 2%-Co 1%, while the degradation efficiency was about 35% for the undoped MoO3 thin film. [ABSTRACT FROM AUTHOR]

A series of ultralong (up to tens of micrometers) MoO 3 nanowire-based membranes were synthesized for the treatment of aqueous solutions containing the cationic dyes methylene blue (MB) and rhodamine B (RhB). This treatment method possesses extremely rapid and superhigh adsorbability (up to 521 and 321 mg/g for MB and RhB, respectively), as well excellent selective adsorption ability of cationic dyes with respect to the anionic dye methyl orange (MO). Moreover, the cationic dyes on the membrane can be desorbed easily, and reusability is good., Competing Interests: The authors declare no conflict of interest.