Search

A novel portable cotton swab based on nitrogen-doped carbon dots (NCDs) for Al3+ detection was constructed for the first time. NCDs with bright green fluorescence were prepared by hydrothermal method with phenylhydrazine hydrochloride and 3-hydroxy-2-naphthoic acid hydrazide as precursors. The surface of NCDs was exposed to abundant functional groups (such as amino, carboxyl, hydroxyl, etc.), which was helpful for the formation of complexes between NCDs and Al3+. In the presence of Al3+, the aggregation of NCDs obviously induced their fluorescence enhancement due to the aggregation-induced emission (AIE) of NCDs. Furthermore, the quantum yield (QY) of NCDs was enhanced by 12 times with Al3+, and the fluorescence lifetime was increased by 7.54 ns. The fluorescence intensity was linearly correlated with the concentration of Al3+ (2.5–300 μM), and the limit of detection was 0.76 μM. Moreover, for the portable way, cotton swabs were successfully employed to construct the sensors for the detection of Al3+ in food samples. This proposal has potential for the application in food analysis. [ABSTRACT FROM AUTHOR]

A novel glow-type chemiluminescence (CL)-based nanosensing system was developed for sensitive and rapid point-of-care testing (POCT) of H2O2 in food. CuSe nanoparticles (CuSeNPs) have excellent peroxidase-like activity. After being modified with thiols of 4-mercaptophenylboronic acid (MBA) (CuSeNPs@MBA), luminol can be catalyzed to produce long-lasting CL in the presence of H2O2. The possible reason for the long-lasting glow-type CL behavior was explored. Under the optimized condition, H2O2 can be sensitively detected with improved repeatability. The limit of detection is as low as 0.30 μM. To meet the requirement of in situ and outside of laboratory detection, a 3D-printed portable device was designed which can eliminate the environmental interference to improve detection accuracy. The developed multifunctional platform also has the advantages of simple operation and low cost, suggesting its great potential for applications in food and agricultural fields. [ABSTRACT FROM AUTHOR]

A dual-responsive ratio electrochemical-colorimetric method for nitrite (NO2−) is established based on the combination of nanoenzyme (Mn3O4) catalysis with diazotization reactions. The Mn3O4 can oxidize colorless 3,3′,5,5′-tetramethylbenzidine (TMB) into blue TMBox. The NO2− induces the diazotization reaction of TMBox, leading to a decrease of the signal at 652 nm and the generation of a new signal from diazotized TMBox at 445 nm. Furthermore, the presence of NO2− reduces the electrochemical oxidation signal of TMB and simultaneously provides its electrochemical signal. Compared with traditional single-mode detection, dual-mode detection offers higher sensitivity, lower detection limits, and better interference resistance. The inherent advantages of this method make it feasible to detect NO2− in real samples, offering broad prospects for applications in food safety and environmental monitoring. [ABSTRACT FROM AUTHOR]

An economically viable and greener approach is introduced to fabricate red emissive carbon dots (R@CQDs) via employing hydrothermal means on Hibiscus rosa-sinensis leaves as precursor source. The obtained R@CQDs displayed excitation-dependent behavior, with high aqueous stability, quantum yield of 56%, and outstanding fluorescence aptitude under the conditions of varied range of ionic strength and pH (1–12). The fluorescence emission behavior of R@CQDs displayed selective turn off fluorescence response to tartrazine over other interfering species with a limit of detection of 0.09 µM and quantitation limit of 0.30 µM. Theoretical calculations employing density functional theory (DFT) were carried out to complement experimental findings and getting insights into the underlying mechanism governing the sensing of tartrazine. The developed sensor holds significant potential for tartrazine detection in real samples and offering wider prospective in the food safety assessment. [ABSTRACT FROM AUTHOR]

A new type of carbon dots (D-NCCDs) was synthesized by 3, 5-diaminobenzoic acid, N,N-dimethyl-o-phenylenediamine, and D-cysteine. The morphology and structure of D-NCCDs were investigated by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and FT-IR spectra, and the chirality was characterized by circular dichroism. In the presence of hydrogen peroxide, the fluorescence of D-NCCDs at 487 nm (λex = 410 nm) showed great discrimination ability towards glutamine enantiomers. The ratio of fluorescence intensity (F/F0) to the concentration of D-Gln showed good linearity in the range 0.5–10 mM, with a detection limits of 0.11 mM. Meanwhile, the color of the solution gradually changed from light yellow to yellow–brown. The UV–Vis absorption ratio (A/A0) at 410 nm showed good linearity with the concentration of D-Gln in the range 0.5 to 20 mM; the detection limit is 7.7 μM. But the fluorescence and absorbance of D-NCCDs showed no significant change after the addition of L-glutamine. Thus, fluorescence and colorimetry dual-mode discrimination of glutamine enantiomers was achieved. The fluorescence enantioselectivity of Gln (FL-Gln/FD-Gln) is 1.62, and the colorimetric enantioselectivity of Gln (AD-Gln/AL-Gln) is 2.14. The chiral discrimination mechanism of D-NCCDs to Gln enantiomers was also investigated systematically. This work not only can discriminate glutamine enantiomers with high sensitivity and convenience, but also offers a new strategy for preparing new dual mode chiral nanoprobes. [ABSTRACT FROM AUTHOR]

A novel fluorescent sensor based on silver nanoparticle-carbon dot composites (Ag@CDs) has been developed for the rapid and quantitative detection of aquatic bacteria. The sensor operates on the principle of plasmon-enhanced resonance energy transfer, where the fluorescence of CDs is quenched by Ag nanoparticles and restored upon bacterial interaction due to the generation of reactive oxygen species. The Ag@CDs exhibit a linear response to bacterial concentration over the range 7 × 104 ~ 4 × 107 CFU·mL−1, with a low detection limit of 4 × 104 CFU·mL−1. The fluorescence recovery is rapid, reaching maximum intensity within 5 min. The method demonstrates high selectivity, with minimal interference from common ions and compounds found in municipal and industrial wastewater. The Ag@CDs-based 96-well plate assay for quantitative measurement of bacteria was developed. The assay's performance was further validated through the analysis of real water samples, showing a recovery of 94.0 ~ 102% for domestic wastewater and 97.6 ~ 106% for industrial wastewater. Also, Ag@CDs-based test strips assay for semi-quantitation were developed for rapid in-field aquatic bacteria detection. Ag@CDs can be conveniently integrated into 96-well plates and test strips, providing rapid on-site aquatic bacteria testing. [ABSTRACT FROM AUTHOR]

The development of an affordable chemiresistive biosensor enhanced with a multi-walled carbon nanotube–zinc oxide (MWCNT-ZnO) nanofiber composite is presented. The sensor leverages the precise interaction between lipoarabinomannan (LAM) tuberculosis (TB) antigens and antibodies to achieve high sensitivity and specificity. The MWCNT-ZnO nanofibers have a larger surface area and better electrical conductivity, which makes it easier for TB antibodies to stick to them. The binding of LAM TB antigens to the fixed Monoclonal Antibody-MBS320597 induces significant resistance changes in the chemiresistive sensor, enabling accurate TB detection. Performance evaluation reveals a linear detection range from 1.0 to 100.0 pg/mL in the lower concentration range and up to 6.0 ng/mL in the higher concentration range, with a sensitivity of 79.750 mA pg mL−1 cm−2 and a lower limit of detection of 40.54 fg/mL. The sensor exhibits a response time of 102 s. Featuring rapid response time and high sensitivity, this biosensor is ideally suited for point-of-care (PoC) applications. The incorporation of MWCNT-ZnO nanofibers shows great potential for enhancing the development of sensitive and cost-effective TB diagnostic tools, which could play a crucial role in advancing global TB control and management efforts. [ABSTRACT FROM AUTHOR]

The synthesis and characterization of pH-sensitive boron and nitrogen co-doped CDs (B, N-CDs) is reported. The fluorescence of B, N-CDs exhibited pH-responsive behavior within the range pH 3.0–6.0, attributed to their controlled aggregation and disaggregation. Interestingly, the fluorescence of B, N-CDs was quenched by the inner filter effect from chrome azurol S (CAS). With the subsequent addition of Al3+, the fluorescence of B, N-CDs was restored due to the formation of blue Al3+-CAS and B, N-CDs-Al3+ complexes. Consequently, a fluorescent and colorimetric dual-mode sensor for Al3+ detection was developed. The proposed sensor enabled Al3+ detection in the ranges and limits of detection of 3.75–22.5 μM and 2.67 μM for the fluorescent mode and 5–20 μM and 4.8 μM for the colorimetric mode, respectively. Furthermore, the efficacy of the sensor was validated through successful detection of Al3+ in tablet samples. The obtained B, N-CDs promised the application in acid condition and the proposed sensor is expected to be applied to in situ on-line detection of Al3+. [ABSTRACT FROM AUTHOR]

A highly sensitive molecularly imprinted electrochemiluminescence (MIECL) sensor was developed for detecting rifampicin (RIF) based on luminol@Co-MOF. Co-MOF had a significant enhancement of ECL signaling in the luminol-O2 system. Molecular imprinted polymers (MIPs) with the introduction of RIF provide new properties for the specific recognition of RIF. A noteworthy decrease in ECL intensity was observed with higher concentrations of RIF. Consequently, the ECL signal was controlled by RIF elution from and adsorption by the MIP, thus establishing a new method for RIF detection. Under optimal conditions, this sensor exhibited linear detection ranges of RIF between 1.0 × 10−11 mol L−1 and 1.0 × 10−6 mol L−1, with a detection limit of 3.3 × 10−12 mol L−1 (S/N = 3). The recoveries ranged between 98.1 and 106.0% in fish samples. This method can be used as a sensitive and rapid method to detect RIF in real samples. [ABSTRACT FROM AUTHOR]

The self-assembly material N,N-bis-(3-dimethyl aminopropyl)-3,4,9,10-perylene tetracarboxylic acid diimide (PDI) is reported to show electrochemical (EC)/electrochemiluminescence (ECL) property for designing new dual-mode dopamine (DA) sensors. K2S2O8 significantly improved the EC reduction current at -0.346 V and ECL intensity at -0.25 V of the PDI self-assembly material. DA largely decreased the EC reduction current and ECL intensity of this homogeneous EC/ECL material due to the competitive consumption of K2S2O8 in the oxidization process of DA and the low electron conductivity of polyDA formed through the oxidization of DA by K2S2O8. In addition, the ECL quenching mechanism involved an energy-transfer process resulting from the collision between the produced o-benzoquinone species (oxidization of DA) and the excited state of PDI, which decreased the ECL intensity. This homogeneous EC/ECL material showed linear EC current response for DA from 5.0 nM to 50.0 µM with a detection of limit of 2.7 nM and linear ECL response for DA from 1.0 nM to 100.0 µM with a detection of limit of 0.41 nM. The proposed dual-mode EC/ECL sensors also showed good feasibility in urine sample analysis. [ABSTRACT FROM AUTHOR]

A method for detecting methamphetamine (MET), ketamine (KET), and morphine (MOP) molecules is presented using a reusable substrate based on SERS. The SERS substrate was prepared by etching the Au/Ag alloy film to synthesize a nanoporous Au membrane (AuNPM). By optimizing the preparation conditions and using rhodamine 6G (R6G) as an analyte, the AuNPM exhibited good SERS performance with a limit of detection (LOD) of 10−9 mol L−1. A competitive immunoassay category has been applied to the detection of MET, KET, and MOP. The MET, KET, and MOP antigens were functionalized on the surface of the AuNPM to specifically bind to the related drug antibodies. The Au nanoparticles (AuNPs) modified with 4-mercaptobenzoic acid (4-MBA) and antibodies against MET, KET, and MOP were used as nanotags. The 4-MBA served as the reporting molecule and drug antibodies were used to bind to free drug molecules in the target solution. The mixture of nanotags and target solution was dropped onto the antigen-modified AuNPM (antigen/AuNPM), and the free nanotags bind to the antigen/AuNPM. By comparing the SERS intensity of 4-MBA with the presence or absence of drug molecules, the drugs were qualitatively and quantitatively identified. Through this category, the LODs for detecting MET, KET, and MOP were 0.1, 1, and 1 ng mL−1, respectively. This study proposes an effective method for constructing SERS-based detection of drug molecules with good potential for practical applications. [ABSTRACT FROM AUTHOR]

A new type of label-free electrochemical immunosensor for the high-sensitivity determination of parathion was developed based on the oriented immobilization of nanobody (VHH9) on a gold nanoparticle-loaded polyvinyl alcohol/citric acid nanofiber membrane-modified electrode. The morphology characterization and assembly process of the modified materials were investigated using scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). Under the optimum conditions, the label-free electrochemical immunosensor for parathion exhibited a linear range of 0.0015–6400 ng/mL and a low detection limit of 0.48 pg/mL, the signal response of which was 10 times higher than that of the randomly immobilized VHH9. The immunosensor possessed high selectivity, good repeatability and reusability (keeping above 90% of its initial activity after repeating 8 times), and stability (remaining 90% after 9 weeks of storage). Finally, the average recoveries of parathion from food samples were 93.76–105.73% with the coefficient of variation being 2.65–6.85%, showing good correlation with UPLC (R2 = 0.9950). Therefore, our nanobody immobilization protocol is simple and effective and proves the potential to be utilized as a promising candidate for sensing platform. [ABSTRACT FROM AUTHOR]

A metal–organic-framework (MOF) fluorescent sensor is reported based on NH2-MIL-101(Fe) propelled pesticide and alkaline phosphatase (ALP) catalytic reaction. Different from previous reports, a cascade reaction system combined with MOF structural changes to generate fluorescence was employed. The rationale is that ALP can hydrolyze L-ascorbic acid 2-phosphate (AAP) into L-ascorbic acid (AA), which can reduce Fe3+ to decompose structurally NH2-MIL-101(Fe), resulting in 2-aminoterephthalic acid (NH2-BDC) with intense fluorescence. The fluorescence can be decreased to different degrees due to inhibition of organophosphate pesticides (OPPs) on the activity of ALP. By taking chlorpyrifos (CPY) as the model compound of an OPP pesticide and adding ALP and CPY into the NH2-MIL-101(Fe) framework, the resulting cascade reaction fluorescence sensors exhibit a good sensitivity for CPY and ALP sensing. The working ranges are 0.02–2 μg/L and 0.2–20 mU/mL with detection limits (LOD) of 5.31 ng/L and 0.05 mU/mL, respectively. The proposed sensor has been actually applied to satisfactory detection of CPY and ALP in food and serum samples. This fluorescence-based assay may extend the application of MOF-based biosensors. [ABSTRACT FROM AUTHOR]

A machine learning-assisted 3D-printed conducting microneedle-based electrochemical sensing platform was developed for wireless, efficient, economical, and selective determination of buprenorphine. The developed microneedle array-based sensing platform used 3D printing and air spray coating technologies for rapid and scalable manufacturing of a conducting microneedle surface. Upon optimization and understanding of the electrode stability, redox behavior, and electrochemical characteristics of as-prepared conducting microneedle array, the developed electrochemical platform was investigated for monitoring different levels of buprenorphine in the artificial intestinal fluid and found to be highly sensitive and selective towards buprenorphine for a wide detection range from 2 to 140 μM, with a low limit of detection of 0.129 μM. Furthermore, to make the sensing platform user accessible, the experimentally recorded sensing data was used to train a machine learning model and develop a web application for the numerical demonstration of buprenorphine levels at the point of site. Finally, the proof-of-concept study demonstrated that by advancing our prevailing 3D printing and additive manufacturing techniques, a low-cost, user-accessible, and compelling wearable electrochemical sensor could be manufactured for minimally invasive determination of buprenorphine in interstitial fluid. [ABSTRACT FROM AUTHOR]

Water dispersible L-glutamic acid (Glu) functionalized cesium lead bromide perovskite quantum dots (CsPbBr3 PQDs), namely CsPbBr3@Glu PQDs were synthesized and used for the fluorescence "turn-off" detection of myoglobin (Myo). The as-prepared CsPbBr3@Glu PQDs exhibited an exceptional photoluminescence quantum yield of 25% and displayed emission peak at 520 nm when excited at 380 nm. Interestingly, the fluorescence "turn-off" analytical approach was designed to detect Myo using CsPbBr3@Glu PQDs as a simple optical probe. The developed probe exhibited a wide linear range (0.1–25 µM) and a detection limit of 42.42 nM for Myo sensing. The CsPbBr3@Glu PQDs-based optical probe provides high ability to determine Myo in serum and plasma samples. [ABSTRACT FROM AUTHOR]

By combining boric acid-modified carbon dots (p-CDs) and alizarin red (ARS), a double emission probe p-CDs@ARS with fluorescence at 410 nm and 600 nm is designed for the detection of glyphosate. When Cu2+ is added, it binds with ARS to cause ARS release from p-CDs@ARS, which decreases the fluorescence at 600 nm. However, in the presence of glyphosate, glyphosate competes to the binding of Cu2+, releasing ARS to bind with p-CDs again. Therefore, the fluorescence of 600 nm recovers. Based on this, the fluorescence of 410 nm and 600 nm act as the reference and response signal, respectively, achieving the ratiometric fluorescence detection of glyphosate. The linear range of glyphosate detection is 0.5–50 µM with a limit of detection at 0.37 µM which is well below the maximum residue limit for glyphosate in food. When the probe is used to detect the glyphosate residue in Pearl River water and cucumber, the detection results are well consistent with those detected by HPLC. The established method based on p-CDs@ARS has the advantages that the assembly of ratiometric fluorescence probe is simple, and the detection speed is fast. Additionally, a typical INHIBIT logical system has been successfully constructed based on glyphosate, Cu2+, and the fluorescence signal of p-CDs@ARS. [ABSTRACT FROM AUTHOR]

Uniform PtCoRuRhFe high-entropy alloy nanoflowers (HEANFs) were fabricated by a simple wet-chemical co-reduction method in oleylamine for quantitative colorimetric determination of captopril (CAP) based on multi-site synergistic signal amplification. Specifically, the peroxidase mimetic activity of the PtCoRuRhFe HEANFs was examined through catalysis of 3,3′,5,5′-tetramethylbenzidine (TMB) oxidation, whose catalytic mechanism was investigated by electron paramagnetic resonance (EPR) spectroscopy. The role of the ·O2− was figured out during the catalytic procedure. Further, the oxidation of TMB (oxTMB) can be effectively reduced by CAP, accompanied by quickly transforming the solution color from blue to colorless. More importantly, the absorbance at 652 nm is linearly related to the CAP concentration in a range 5.0–50.0 mM with a low detection limit of 2.82 mM. The method has been applied to the determination of CAP in human urine samples. It offers a simple and high-efficiency method for facile and visual detection of CAP in hospitals. [ABSTRACT FROM AUTHOR]

Researchers have shown significant interest in three-dimensional DNA building blocks due to their potential applications in biomedicine and biosensing. This study focuses on the synthesis of an HgII ion-stabilized DNA capsule with T-HgII-T pairs for the purpose of detecting melamine (MA). MA reacts with HgII to form a MA-HgII-MA complex, which causes HgII to leave the capsule shell, ultimately leading to capsule collapse and release of fluorescent cargo as output signal. Density functional theory (DFT) calculations and X-ray absorption spectroscopy (XAS) were used to demonstrate the ability of MA to extract HgII from the T-HgII-T adducts. The DNA capsules were characterized using TEM, SEM, DLS, zeta-potential, and melting curve analysis, which indicated the successful construction of the HgII-intercalated DNA shell. The MA-triggered destruction of the DNA capsules was visualized by confocal microscopy, and the dynamics of decapsulation were evaluated through fluorescent cargo release. The HgII-stabilized DNA capsules enable MA detection with a detection limit of 0.037 µM and are insensitive to potential interfering ions and amino acids. The tests conducted using MA spiked milk solution resulted in recoveries ranging from 109 to 113% (0.1 µM) and 94.5 to 96% (0.5 µM). These results suggest that the system is promising for highly accurate and reproducible monitoring of MA adulteration. [ABSTRACT FROM AUTHOR]

A simple one-pot green synthesis method was used to prepare urease-inorganic hybrid nanoflowers (UE-HNFs), which had a high surface-to-volume ratio to improve enzyme catalytic efficiency and make urease reusable. A portable colorimetric microliter tube based on urease-inorganic hybrid nanoflowers (UE-HNFs-PCMT), as an urea colorimetric biosensor, was developed for determining urea concentration in milk. The combination of urea colorimetric biosensor and a smartphone is used for capturing the colour change of milk after reaction. There was a good linear relationship between colour intensity of the image (Δ intensity) and urea concentration (43–600 mg L−1), with a detection limit of 12.81 mg L−1. UE-HNFs-PCMT has the advantages of no need for complex equipment, easy operation, reusability, low detection cost, good portability, and environmental friendliness and can achieve urea detection in milk. [ABSTRACT FROM AUTHOR]

A Raman-active boronate modified surface-enhanced Raman scattering (SERS) microporous array chip based on the enzymatic reaction was constructed for reliable, sensitive, and quantitative monitoring of D-Proline (D-Pro) and D-Alanine (D-Ala) in saliva. Initially, 3-mercaptophenylboronic acid (3-MPBA) was bonded to Au-coated Si nanocrown arrays (Au/SiNCA) via Au–S bonding. Following this, H2O2 obtained from D-amino acid oxidase (DAAO)-specific catalyzed D-amino acids (D-AAs) further reduced 3-MPBA to 3-hydroxythiophenol (3-HTP) with a new Raman peak at 882 cm−1. Meanwhile, the original characteristic peak at 998 cm−1 remained unchanged. Therefore, the I882/I998 ratio increased with increasing content of D-AAs in the sample to be tested, allowing D-AAs to be quantitatively detected. The Au/SiNCA with large-area periodic crown structure prepared provided numerous, uniform "hot spots," and the microporous array chip with 16 detection units was employed as the platform for SERS analysis, realizing high-throughput, high sensitivity, high specificity and high-reliability quantitative detection of D-AAs (D-Pro and D-Ala). The limits of detection (LOD) were down to 10.1 µM and 13.7 µM throughout the linear range of 20–500 µM. The good results of the saliva detection suggested that this SERS sensor could rapidly differentiate between early-stage gastric cancer patients and healthy individuals. [ABSTRACT FROM AUTHOR]

Room temperature phosphorescent carbon dots (NCCDs@SiO2) were obtained by encapsulating hydrothermally synthesized CDs in a dense Si-O network structure after high-temperature calcination using silica as the matrix. This can avoid the quenching effect of dissolved oxygen in water and has a phosphorescence lifetime of up to 2.41 s. Using the phosphorescence property of NCCDs@SiO2, a phosphorescence quenching sensor was developed for the sensitive and selective detection of thiram with the assistance of Cu2+. Cu2+-thiram complexes led to a rapid phosphorescence quenching of NCCDs@SiO2 within 30 s through the inner filter effect. The linear range of phosphorescence for thiram was 0.5–100 µM with a detection limit of 0.121 µM. The proposed method was able to detect thiram in real samples and was validated by high-performance liquid chromatography (HPLC) confirming the potential of this phosphorescence sensing method for thiram detection. This work opens up a new avenue for the detection of thiram residues in fruits and vegetables and also provides a new idea for the design of a rapid detection platform using other room temperature phosphorescent materials. [ABSTRACT FROM AUTHOR]

Public health and environmental well-being have become increasingly threatened by the contamination of pharmaceuticals and heavy metal ions. This study focuses on addressing this critical issue by developing a novel electrochemical sensor for the dual-functional detection of acetaminophen (AP) and Cu2+. Utilizing willow catkins as a biomass template, a hollow tubular NiS@NSC composite was prepared by simple nickel salt impregnation combined with calcination and sulfurization. A highly sensitive dual-functional electrochemical sensor was thus constructed that can detect both acetaminophen (AP) and Cu2+. By examining its electrochemical properties, the sensor achieves an impressive detection limit of 1.33 pM for AP, with a linear range of 4.00 pM ~ 0.15 mM. The sensor can also detect Cu2+, with a detection limit of 1.04 µM, and a linear range of 3.13 µM ~ 0.66 mM. The sensor also exhibits strong resistance to interference, and good repeatability and stability. In addition, the sensor has demonstrated good performance in actual sample analysis, including the detection of AP in serum and Cu2+ in wastewater. This excellent electrochemical sensing performance is mainly attributed to the synergistic effect of its unique tubular structure and highly conductive N, S co-doped carbon. This results in the sensor exhibiting minimal charge transfer resistance, an extensive electrochemically active surface area, and a high density of active sites. [ABSTRACT FROM AUTHOR]

Helicobacter pylori (Hp) prevail globally as the primary cause of gastritis, gastric ulcer, and potential gastric cancer, highlighting the need for rapid and precise point-of-care (POC) detection of Hp nucleic acid. Upconversion nanoparticle-based lateral flow assay (UCNPs-LFA) exhibit great potential in POC detection, due to their high optical stability and absence of background fluorescence. However, insufficient sensitivity for nucleic acid detection remains a key challenge. This study systematically optimizes UCNPs-LFA by focusing on target capture, signal transduction, signal separation, and signal analysis, to enhance its detection capabilities for Hp nucleic acid. The optimized UCNPs-LFA platform features a significantly decreased detection limit, a broadened detection range, and high reliability. Results demonstrate that the limit of detection (LOD) is 25 fM, a 105-fold improvement over the initial platform. This systematic optimization strategy is versatile and can be applied to optimize other nanoparticle-based LFAs. [ABSTRACT FROM AUTHOR]

A novel immunoassay platform is presented utilizing a cardiac troponin T antibody (Ab-cTnT) labelled with 5-carboxyfluorescein (5-FAM) integrated into a two-dimensional (2D) manganese dioxide nanosheet (MnO2 NS) matrix. This strategy enables a turn-on response towards cTnT antigen within a mere 10-min incubation period, boasting an impressive lower detection limit of 0.038 ng/mL. Crucially, our probe demonstrates exceptional selectivity amidst the presence of coexisting biomolecules and ions, ensuring precise detection of cTnT. Moreover, the developed platform showcases promising utility in sensing cTnT from spiked human serum samples, yielding satisfactory recovery percentages ranging from 82 to 105%. Additionally, we introduce and easy-to-use and cost-effective test strip for point-of-care detection of cTnT, further enhancing accessibility to critical cardiovascular diagnostics. [ABSTRACT FROM AUTHOR]

A novel approach is introduced using nanoplasmonic microarray–based solid-phase recombinase polymerase amplification (RPA) that offers high sensitivity and multiplexing capabilities for gene detection. Nanoplasmonic microarrays were developed through one-step immobilization of streptavidin/biotin primers and fine-tuning the amplicon size to achieve high plasmon-enhanced fluorescence (PEF) on the nanoplasmonic substrate, thereby improving sensitivity. The specificity and sensitivity of solid-phase RPA on nanoplasmonic microarrays was evaluated in detecting E, N, and RdRP genes of SARS-CoV-2. High specificity was achieved by minimizing primer-dimer formation and employing a stringent washing process and high sensitivity obtained with a limit of detection of four copies per reaction within 30 min. In clinical testing with nasopharyngeal swab samples (n = 30), the nanoplasmonic microarrays demonstrated a 100% consistency with the PCR results for detecting SARS-CoV-2, including differentiation of Omicron mutations BA.1 and BA.2. This approach overcomes the sensitivity issue of solid-phase amplification, as well as offers rapidity, high multiplexing capabilities, and simplified equipment by using isothermal reaction, making it a valuable tool for on-site molecular diagnostics. [ABSTRACT FROM AUTHOR]

A fluorescence and colorimetric dual-signal sensing system for the determination of ascorbic acid (AA) in complex media was developed by using 5,10,15, 20-tetrakis(4-sulfonyl) porphyrin (TSPP) as a sensing probe and sodium 2,6-dichloroindophenol (DCIP) as a bridge. A fluorescence resonance energy transfer (FRET) effect occurred when DCIP was added to the TSPP solution, resulting in the quenching of the fluorescence signal of TSPP and a change in the color of the solution from pink to blue. The DCIP in the system reacted with AA in a redox reaction to produce colorless phenol imine, the color of the solution changed from blue to green causing an obvious colorimetric response, and the TSPP/DCIP sensing system's fluorescence signal restored owing to AA introduced. The fluorescence method for AA showed good linearity in the ranges 0.08 mM ~ 1 mM and 1 mM ~ 43.6 mM with a detection limit of 6.4 μM. And the colorimetric method for AA showed excellent linearity in the range 0.46 mM ~ 40.2 mM with a detection limit of 76.0 μM. The constructed "dual-signal" probe in the study has been successfully applied to the detection of AA in practical samples. The method proposed has great potential for practical applications and provides new ideas for the visual inspection of portable measurements. [ABSTRACT FROM AUTHOR]

Ce2(SO4)3 was doped into 4,6-diamino-2-mercaptopyrimidine (DAMP)-encapsulated copper nanoclusters (CuNCs) via a facile, rapid, low-temperature, and green self-assembly synthesis method to obtain fluorescent S,N-codoped Cu/Ce-DAMP nanoparticles (S,N-codoped Cu/CeNPs) for the detection of Cr(VI). The prepared Cu/CeNPs exhibit double emission peaks at 470 nm and 610 nm. The fluorescence emission at 610 nm is significantly enhanced due to the aggregation-induced emission (AIE) effect, and the quantum yield is as high as 20.19%. The fluorescence emission at 610 nm can be selectively quenched by Cr(VI) due to the internal filter effect (IFE) and dynamic quenching, whereas the weak fluorescence at 470 nm remains almost stable. On this basis, a fluorescence assay method for Cr(VI) was established, with good linearity in the concentration range 0.5–120 µM and a detection limit (LOD) of 134 nM. Using a smartphone to take photos of the fluorescence signals changes caused by Cr(VI) rapid visual detection is achieved with a linear range of 10–130 μM and a LOD of 2.35 μM. The proposed method was successfully applied to the detection of Cr(VI) in actual water samples. [ABSTRACT FROM AUTHOR]

Matrix metalloproteinase-2 (MMP-2) plays a pivotal role in anti-aging research. Developing advanced detection platforms for MMP-2 with high specificity, sensitivity, and accessibility is crucial. This study introduces a novel electrochemiluminescence (ECL) biosensor for MMP-2 determination, leveraging the CRISPR/Cas13a system and Exponential Amplification Reaction (EXPAR). The biosensor operates by utilizing the T7 RNA polymerase to transcribe RNA from a DNA template upon MMP-2 interaction. This RNA activates Cas13a, leading to signal amplification and ECL detection. The incorporation of the "photoswitch" molecule [Ru(phen)2dppz]2+ streamlines the process by eliminating the need for extensive electrode modification and cleaning. Under optimized conditions, the biosensor achieved an impressive detection limit of 12.8 aM for MMP-2. The platform demonstrated excellent selectivity, reproducibility, and stability, making it highly suitable for detecting MMP-2 in complex biological samples. This innovative approach shows great potential for applications in molecular diagnostics and anti-aging research. [ABSTRACT FROM AUTHOR]

A sandwich-type electrochemical aptasensor for ultrasensitive detection of glypican-3 (GPC3) was constructed using GPC3 aptamer (GPC3Apt) labelled reduced graphene oxide-cerium oxide-gold nanoparticles (RGO-CeO2-Au NPs) as the signal probe and the same GPC3Apt as the capture probe. The electrochemical redox properties of CeO2 (Ce3+/Ce4+) in the RGO-CeO2-Au NPs indicate the electrochemical signals. When the target GPC3 was present, an "aptamer-protein-aptamer" sandwich structure was formed on the sensing interface due to the specific binding between the protein and aptamers, resulting in an increased electrochemical redox signal detected by differential pulse voltammetry (DPV) technique. Under optimal conditions, the established aptasensor exhibited a logarithmic linear relationship between the current response and GPC3 concentration in the range 0.001–100.0 ng/mL, with a minimum detection limit of 0.74 pg/mL. Using the spike-recovery tests for measurement of the human serum samples, the recovery was from 99.26 to 114.01%, and the RSD range was 3.04 to 5.34%. Furthermore, the sandwich-type electrochemical aptasensor exhibited excellent performance characteristics such as good stability, high specificity, and high sensitivity, demonstrating effective detection of GPC3 in human serum samples and can be used as a clinical detection tool for GPC3. [ABSTRACT FROM AUTHOR]

With SARS-CoV-2 N protein as a model target, a signal-enhanced LFIA based on Au@Pt nanoparticles (NPs) as labels is proposed. This Au@Pt NPs combined the distinguished localized surface plasma resonance (LSPR) effect of Au NPs and the ultrahigh peroxidase-like catalytic activity of Pt NPs. Au@Pt NPs could trigger substrate chromogenic reaction, generating a color signal orders of magnitude darker than their intrinsic color. In the detection, after the coloration of the strips, 3,3′,5,5′-tetramethylbenzidine (TMB) and H2O2 were added, and a dark blue chelate (OxTMB) was produced soon, enhancing the band color significantly. After the signal amplification, the naked-eye detection limit for N protein reached 40 pg/mL. The detection sensitivity enhanced more than 1000 times than that without signal amplification. Compared with mainstream LFIA requiring complex readout instruments, the Au@Pt-based LFIA achieved a comparable sensitivity using naked eyes detection. This point is crucial, especially for unprofessional users or low-resource areas. Hence, this signal-enhanced LFIA may serve as a sensitive, cost-effective, and user-friendly detection method. It can shorten the testing window period and help identify early infections. [ABSTRACT FROM AUTHOR]

A novel glow-type chemiluminescence (CL)-based nanosensing system was developed for sensitive and rapid point-of-care testing (POCT) of H2O2 in food. CuSe nanoparticles (CuSeNPs) have excellent peroxidase-like activity. After being modified with thiols of 4-mercaptophenylboronic acid (MBA) (CuSeNPs@MBA), luminol can be catalyzed to produce long-lasting CL in the presence of H2O2. The possible reason for the long-lasting glow-type CL behavior was explored. Under the optimized condition, H2O2 can be sensitively detected with improved repeatability. The limit of detection is as low as 0.30 μM. To meet the requirement of in situ and outside of laboratory detection, a 3D-printed portable device was designed which can eliminate the environmental interference to improve detection accuracy. The developed multifunctional platform also has the advantages of simple operation and low cost, suggesting its great potential for applications in food and agricultural fields. [ABSTRACT FROM AUTHOR]

Public health and environmental well-being have become increasingly threatened by the contamination of pharmaceuticals and heavy metal ions. This study focuses on addressing this critical issue by developing a novel electrochemical sensor for the dual-functional detection of acetaminophen (AP) and Cu2+. Utilizing willow catkins as a biomass template, a hollow tubular NiS@NSC composite was prepared by simple nickel salt impregnation combined with calcination and sulfurization. A highly sensitive dual-functional electrochemical sensor was thus constructed that can detect both acetaminophen (AP) and Cu2+. By examining its electrochemical properties, the sensor achieves an impressive detection limit of 1.33 pM for AP, with a linear range of 4.00 pM ~ 0.15 mM. The sensor can also detect Cu2+, with a detection limit of 1.04 µM, and a linear range of 3.13 µM ~ 0.66 mM. The sensor also exhibits strong resistance to interference, and good repeatability and stability. In addition, the sensor has demonstrated good performance in actual sample analysis, including the detection of AP in serum and Cu2+ in wastewater. This excellent electrochemical sensing performance is mainly attributed to the synergistic effect of its unique tubular structure and highly conductive N, S co-doped carbon. This results in the sensor exhibiting minimal charge transfer resistance, an extensive electrochemically active surface area, and a high density of active sites. [ABSTRACT FROM AUTHOR]

A phenyl-modified silica isoporous membrane (Ph-SIM) was prepared on the indium-tin-oxide (ITO) electrode using the electrochemically assisted self-assembly (EASA) method. The resulting Ph-SIM preserved vertically ordered nanochannels while exhibiting outstanding hydrophobicity due to the incorporation of phenyl groups within the nanochannels. As a result, the Ph-SIM/ITO sensor exhibited a remarkable affinity for PCNB extraction through hydrophobic interactions, leading to high detection sensitivity. The electrochemical response showed a linear enhancement with the logarithmic concentration of PCNB ranging from 0.1 to 20.0 µM, and the limit of detection was 4.64 nM. Practical results demonstrated that the Ph-SIM/ITO sensor possessed good anti-fouling capability and robust stability, making it a promising candidate for portable detection of non-polar contaminants. [ABSTRACT FROM AUTHOR]

Stainless steel sheets were coated with carbon ink to obtain disposable carbon electrodes, which were used as supports for moleculary imprinted polymer (MIP) electrochemical sensors by electropolymerizing o-phenylenediamine and o-aminophenol along with indole-3-acetic acid (IAA) as the template. After optimization, the MIP biosensors could be used for sensitive and selective detection of IAA with the limit of quantification of 0.1 µM. Our experimental results showed that stable and reproducible electrochemical responses could be achieved for the disposable MIP biosensors. This approach was successfully used for detection of IAA in different tissues of pea sprouts. This study reveals the potential of MIP electrochemical sensors in practical applications and shrinks the trench between the research and the real world. [ABSTRACT FROM AUTHOR]

A hydrothermal synthetic method is established to produce blue fluorescent Eu3+-doped niobium carbide MXene quantum dots (Eu3+-Nb2C MQDs). The synthesized Eu3+-Nb2C MQDs demonstrated a quantum yield of 20.61% and a maximum emission intensity at 405 nm. The as-prepared Eu3+-Nb2C MQDs acted as a sensor for the rapid and sensitive detection of hypoxanthine through fluorescence quenching, and of fluoxetine through fluorescence enhancement mechanisms. The emission peak of Eu3+-Nb2C MQDs at 405 nm exhibited a linear response for hypoxanthine and fluoxetine in the ranges of 0.5–25 µM and 0.125–2.5 µM, with detection limits of 15.0 and 3.7 nM, respectively. The newly developed probe was effectively used for the selective detection of hypoxanthine and fluoxetine in biofluids and pharmaceutical samples. Remarkably, the Eu3+-Nb2C MQDs exhibited minimal cytotoxicity towards A549 lung cancer cells and showed great potential as imaging agent for imaging of Saccharomyces cerevisiae cells. [ABSTRACT FROM AUTHOR]

A cortisol biosensor was developed based on double-conducting polymer nanowires, which exhibits excellent conductivity, resistance to biological contamination, and outstanding sensing performance. The biosensor employs dual-mode electrochemical techniques, namely, differential pulse voltammetry (DPV) and chronoamperometry (CA), for the sensitive and low fouling detection of the glucocorticoid hormone cortisol. Experimental results demonstrated that the linear detection range of the biosensor in DPV mode was 1.0 × 10−14–1.0 × 10−8 M, with a detection limit of 0.131 × 10−14 M. In CA mode, the biosensor exhibited a detection range of 1.0 × 10−13–1.0 × 10−7 M and a detection limit of 0.313 × 10−13 M. The biosensor was successfully utilized for the rapid detection of cortisol in human saliva. The combination of a high-specificity cortisol aptamer and functionalized double-conducting polymer nanowires ensured the exceptional specificity and sensitivity of the biosensor in detecting real biological samples. [ABSTRACT FROM AUTHOR]

Different morphological Cu2O nanoparticles including cube, truncated cube, and octahedron were successfully prepared by a selective surface stabilization strategy. The prepared cube Cu2O exhibited superior peroxidase-like activity over the other two morphological Cu2O nanoparticles, which can readily oxidize 3,3′,5,5′-tetramethylbenzidine (TMB) to form visually recognizable color signals. Consequently, a sensitive and simple colorimetric biosensor was proposed for deoxynivalenol (DON) detection. In this biosensor, the uniform cube Cu2O was employed as the vehicle to label the antibody for the recognition of immunoreaction. The sensing strategy showed a detection limit as low as 0.01 ng/mL, and a wide linear range from 2 to 100 ng/mL. Concurrently, the approximate DON concentration can be immediately and conveniently observed by the vivid color changes. Benefiting from the high sensitivity and selectivity of the designed biosensor, the detection of DON in wheat, corn, and tap water samples was achieved, suggesting the bright prospect of the biosensor for the convenient and intuitive detection of DON in actual samples. [ABSTRACT FROM AUTHOR]

An oxidase (OXD) -like AuAg@AuNPs nanozyme was prepared by Au seeds growth using dopamine carbon dots as reducing and capping agents. The AuAg@AuNPs show excellent OXD-like and surface-enhanced Raman spectroscopy (SERS) activities and can oxidize the non-Raman-active leucomalachite green (LMG) into the Raman-active malachite green (MG). The research displays that D-penicillamine (D-PA) can effectively inhibit the OXD-like activity of Au@AgNPs and enhance the SERS signals as substrate. It is attributed to the formation of S–Au bond due to thiol (-SH) in D-PA. Therefore, a highly sensitive and specific SERS dual-readout sensing platform was proposed to assay D-PA with a limit of detection of 0.1 μg/mL (direct SERS mode) and 6.64 μg/L (indirect SERS mode). This approach was successfully used to determine D-PA in actual pharmaceutical formulations. [ABSTRACT FROM AUTHOR]

Recently, MOFs@AuNPs composites-based catalysts via anchoring of AuNPs onto metal–organic-frameworks (MOFs) have attracted great attention. However, the influence of the AuNPs loading amounts on the catalytic activity of MOFs@AuNPs composites remains largely unexplored. Here, ficin (Fic) protected AuNPs (Fic@AuNPs) anchored onto the surface of UiO-66-NH2 (UiO) modified with poly(2-vinyl-4,4-dimethyl-2-oxazolidine) (PV) were designed and constructed. The UiOPVFic@AuNPs composites with longer PV chains leading to high-loading Fic@AuNPs exhibited intense peroxidase (POD)-mimetic activity in 3,3′5,5′-tetramethylbenzidine (TMB) oxidation. Further, following the colour-fading, dopamine (DA) was sensitively and selectively monitored in the composites-TMB-H2O2 system. The portable smartphone sensing platform-based colourimetric method had good linearity ranging from 3.34 to 36.7 μM (R2 = 0.995), with a limit of detection of 0.3 μM. This protocol explores high-loading AuNPs on polymer-MOFs composites, providing deep insights into understanding catalytic activity improvements of polymer-MOFs@AuNPs catalysts and revealing their application potential in real biological samples analysis. [ABSTRACT FROM AUTHOR]

An electrochemical sensor composed of conductive metal–organic framework [Ni3(HITP)2] and molecular imprinted polymers (MIP) is fabricated to detect dopamine. Ni3(HITP)2 promotes electrons transfer due to the structure of in-plane charge delocalization and layered expansion conjugation. The combination of MIP with Ni3(HITP)2 improves the selectivity and conductivity, exhibiting a wide detection range (0.06 ~ 200 µM) and a low detection limit (0.109 µM). The kinetic mechanism on the electrode surface is an adsorption controlled process, with the equal number of electrons and protons participating in oxidation in the electrocatalytic process of catechol converting to o-quinone. [ABSTRACT FROM AUTHOR]

A thermoresponsive molecularly imprinted hydrogel sensor was constructed for the specific selective recognition of enterovirus 71 (EV71). Due to the introduction of the thermosensitive monomer N-isopropylacrylamide (NIPAM), when the imprinted hydrogel is incubated with the virus at 37℃, the surface specific imprinting cavity will specifically recognize and capture the target virus EV71. When the temperature rises to 45℃, the combined EV71 is rapidly released due to changes in the shape and function of the imprinted sites. The MIP hydrogel-based viral sensor developed recognized, captured, and released the target virus in a non-invasive way. The imprinting factor of the target virus was 5.2, suggesting high selectivity, and the detection limit was 7.1 fM, suggesting high sensitivity. Detection was rapid, as adsorption equilibrium was achieved within 30 min. This method provides a new sustainable avenue for the simple and rapid detection of viruses. [ABSTRACT FROM AUTHOR]

A fluorescent and photoelectrochemical (PEC) dual-mode biosensor based on target biorecognition-triggered cyclic amplification was constructed for Kana detection. With the assistance of the catalyzed reaction of exonuclease III, a Kana-aptamer DNA duplex was designed for conducting the cyclic release of G-rich DNA sequence as well as output DNA S2. The released G-rich sequence triggers the fluorescence (FL) of thioflavin T (ThT), the intensity of which is positively correlated with the Kana concentration. The linear range is 0.2 to 30 nM, and the detection limit reaches 0.07 nM. Simultaneously, the released output DNA S2 was captured by Fe3O4@CdTe-probe ssDNA and then combined with methylene blue to realize the transduction of polarity-reversed PEC signal, leading to the sensitive detection of Kana with a linear range of 0.2 to 40 nM and a calculated detection limit of 0.2 nM. The outstanding performance endows the dual-mode biosensor a promising prospect for practical application. [ABSTRACT FROM AUTHOR]

A wax-patterned paper analytical device (µPAD) has been developed for point-of-care colourimetric testing of serum glutamic oxaloacetic transaminase (SGOT). The detection method was based on the transamination reaction of aspartate with α-ketoglutarate, leading to the formation of oxaloacetate which reacts with the reagent Fast Blue BB salt and forms a cavern pink colour. The intensity of the cavern pink colour grows as the concentration of SGOT increases. UV–visible spectroscopy was utilized to optimize reaction conditions, and the optimized reagents were dropped onto the wax-patterned paper. The coloured PADs, after the addition of SGOT, have been photographed, and a colour band has been generated to correlate the SGOT concentration visually. The images were used to calculate the intensity values using ImageJ software, which inturn was used to calculate the SGOT concentration. The PADs were also tested with serum samples, and SGOT spiked serum samples. The PAD could detect the SGOT concentration ranging from 5 to 200 U/L. The analysis yielded highly accurate results with less than 6% relative error compared to the clinical sample. This colourimetric test demonstrated exceptional selectivity in the presence of other biomolecules in the blood serum, with a detection limit of 2.77 U/L and a limit of quantification of 9.25 U/L. Additionally, a plasma separation membrane was integrated with the PAD to directly test SGOT from finger-prick blood samples. [ABSTRACT FROM AUTHOR]

A ratiometric fluorescence sensor (Fe-MIL-88-NH2/curcumin) based on luminescent metal–organic frameworks (LMOFs) for the determination of curcumin was constructed. Upon the addition of curcumin, the 535-nm emission of curcumin was enhanced, while the fluorescence emission at 438 nm was quenched, under 367-nm excitation. This sensor demonstrated a broad linear range from 1.5 to 40 μM, a low detection limit of 35 nM, and a fast response time of at most 30 s. We verified the Förster resonance energy transfer (FRET) mechanism between donor (Fe-MIL-88-NH2) and acceptor (curcumin), which further proved the selectivity of the approach. The sensing system enabled the detection of curcumin in the traditional Chinese medicine (TCM) Turmeric. A smartphone-assisted sensing platform was prepared to visually detect curcumin in a portable manner. This study represents the first attempt to fabricate LMOFs for ratiometric fluorescence detection of curcumin, which has promising potential for application in TCM. [ABSTRACT FROM AUTHOR]

Highly stable copper nanocluster (CuNCs) with aggregation-induced emission (AIE) properties was synthesized. α-, β-, and γ- MnO2 were utilized as quenchers, with CuNCs fluorescence quenching of 48.9%, 91.5%, and 96.6%, respectively. L-ascorbate-2-phosphate (AAP) was hydrolyzed by acid phosphatase (ACP), and ascorbic acid (AA) was formed. Then, MnO2 could be restored by AA, and the fluorescence of the CuNCs could be restored. An on–off–on detection platform with a high signal/noise ratio was constructed for the sensing of ACP. The fluorescence recovery rate of the CuNCs was related to the crystal forms of MnO2. Then, the equilibrium constants (K) for the reaction between AA and MnO2 were calculated to evaluate the reaction process. Compared with the K values of CuNCs/α-MnO2 and CuNCs/γ-MnO2, the K values for AA and β-MnO2 were maximum. The CuNCs/β-MnO2 system exhibited optimal fluorescence recovery for the sensitive detection of ACP. In the concentration range 0.005–0.06 U/mL, the detection limit was 0.0028 U/mL. The determination of serum ACP levels also revealed satisfactory results. This study provides novel insights into enhancing the sensitivity of the determination of quenchers in different crystal form. [ABSTRACT FROM AUTHOR]

Loofah sponge-like carbon nanofibers (LF-Co,N/CNFs) were utilized as a carrier for Ru(bpy)32+, and then combined with CdS to create a novel solid-state electrochemiluminescence sensor capable of detecting trace amounts of fenpropathrin. LF-Co,N/CNFs, obtained through the high-temperature pyrolysis of ZIF-67 coaxial electrospinning fibers, were characterized by a loofah-like morphology and exhibited a significant specific surface area and porosity. Apart from serving as a carrier, LF-Co,N/CNFs also functioned as a luminescence accelerator, enhancing the system's luminescence efficiency by facilitating electron transmission and reducing the transmission distance. The inclusion of CdS in the luminescence reaction, in conjunction with Ru(bpy)32+, further boosted the sensor's luminescence signal. The resulting sensor demonstrated a satisfactory signal, with fenpropathrin causing significant quenching of the ECL signal. Under optimized conditions, a linear relationship between the signal quench value and fenpropathrin concentration in the range 1 × 10–12 to 1 × 10–6 M was observed, with a detection limit of 3.3 × 10–13 M (S/N = 3). This developed sensor is characterized by its simplicity, sensitivity, and successful application in detecting fenpropathrin in real samples. The study not only presents a straightforward detection platform for fenpropathrin but also introduces new avenues for the rapid determination of various food contaminants, thereby expanding the utility of carbon fibers in electrochemiluminescence sensors. [ABSTRACT FROM AUTHOR]

Staphylococcus aureus (S. aureus) is a common foodborne pathogen, posing a serious threat to public health. Consequently, it is crucial to establish a platform for sensitive and specific determination of S. aureus in food. Herein, phage SapYZUH5, isolated by our lab, was covalently immobilized on Co3O4 to synthesize SapYZUH5@Co3O4. Notably, SapYZUH5@Co3O4 exhibited remarkable oxidase-like activity, enabling the catalysis of dissolved oxygen to generate superoxide anion free radicals and accelerate the TMB chromogenic reaction. Upon introduction of S. aureus, specific capture by SapYZUH5@Co3O4 resulted in inhibiting its oxidase-like activity and decelerating the 3,3′,5,5′-tetramethylbenzidine (TMB) chromogenic reaction. Moreover, S. aureus can be lysed to release the reductive bacterial contents, which can further inhibit the TMB chromogenic reaction. Based on this principle, SapYZUH5@Co3O4 + TMB reaction system was employed for detection with enhanced sensitivity of S. aureus, yielding an equation: A = − 0.092 Log (CSA) + 0.79 (R2 = 0.987), with an ultralow limit of detection (LOD) of 28 CFU mL−1. This system exhibited remarkable specificity and anti-interfere towards S. aureus, owing to the excellent affinity of SapYZUH5 towards S. aureus. In addition, S. aureus in the actual food samples was detected using this system, yielding recoveries ranging from 96.34 to 109.43%, demonstrating its exceptional accuracy. Hence, our proposed covalent immobilization of phage on the nanozyme can realize sensitive and specific colorimetric determination of S. aureus in food samples. [ABSTRACT FROM AUTHOR]

A fluorescent and colorimetric dual-mode strategy based on carbon dots (CDs) was rationally designed for sensitive determination of Cu2+. Green fluorescent CDs with high absolute quantum yield of 72.9% were synthesized by facile one-step hydrothermal treatment of triethylenetetramine and Rose Bengal. Cu2+ could trigger the oxidative and chromogenic reaction of p-phenylenediamine (PPD) to generate chromogenic PPDox, accompanied by the fluorescence quenching of the CDs. The quenching mechanism was identified as the inner filter effect between PPDox and CDs. Therefore, a colorimetric/fluorescent dual-mode detection method for Cu2+ recognition was constructed. The limits of detection for Cu2+ were 4.14 μM and 1.28 μM for colorimetric and fluorescent mode, respectively. In addition, this method had achieved satisfactory results in the detection of Cu2+ in real serum samples. [ABSTRACT FROM AUTHOR]

A novel "turn-on" aptasensor for kanamycin (Kana) detection based on a new Förster resonance energy transfer (FRET) pair is reported. A new organic small molecule was employed as a high-efficiency quencher for fluorophore. Based on specific interactions between ssDNA and the quencher, an ingenious and amplified strategy was designed. In the absence of the target, the fluorescence of the fluorophore labeled at the end of the aptamer was quenched. After the binding of the aptamer to the target, the fluorescence was recovered and amplified. The proposed aptasensor showed high specificity, selectivity, and stability in complicated systems. With the P3-based strategy, the limit of detection for Kana is estimated to be 10 nM, which is much lower than the maximum allowable concentration in milk. The recoveries of spiked Kana in milk were in the range 99.8 ~ 105.3% (n = 3). Fortunately, this novel method can be easily extended to other antibiotics such as tobramycin by simply replacing the aptamer, showing great potential as a universal platform for selective, sensitive, and rapid detection of hazardous analytes in food samples. [ABSTRACT FROM AUTHOR]

Atherosclerosis cardiovascular disease (ASCVD) has become one of the leading death causes in humans. Low-density lipoprotein (LDL) is an important biomarker for assessing ASCVD risk level. Thus, monitoring LDL levels can be an important means for early diagnosis of ASCVD. Herein, a novel electrochemical aptasensor for determination LDL was designed based on nitrogen-doped reduced graphene oxide-hemin-manganese oxide nanoparticles (NrGO-H-Mn3O4 NPs) integrated with clustered regularly interspaced short palindromic repeats and associated proteins (CRISPR/Cas12a) system. NrGO-H-Mn3O4 NPs not only have a large surface area and remarkable enhanced electrical conductivity but also the interconversion of different valence states of iron in hemin can provide an electrical signal. Nonspecific single-stranded DNA (ssDNA) was bound to NrGO-H-Mn3O4 NPs to form a signaling probe and was immobilized on the electrode surface. The CRISPR/Cas12a system has excellent trans-cleavage activity, which can be used to cleave ssDNA, thus detaching the NrGO-H-Mn3O4 NPs from the sensing interface and attenuating the electrical signal. Significant signal change triggered by the target was ultimately obtained, thus achieving sensitive detection of the LDL in range from 0.005 to 1000.0 nM with the detection limit of 0.005 nM. The proposed sensor exhibited good stability, selectivity, and stability and achieved reliable detection of LDL in serum samples, demonstrating its promising application prospects for the diagnostic application of LDL. [ABSTRACT FROM AUTHOR]