Search

In this study, a three-rib intersecting composite diamond honeycomb structure is fabricated by interlocking technology. The mechanical properties of the composite interlocked diamond honeycomb (CIDH) and corresponding sandwich structure (CIDHSS) are experimentally tested. The stiffness, strength, and failure characteristics of CIDH and CIDHSS are analyzed. The results show that CIDH has better mechanical properties than the interlocked Kagome and square honeycombs. The edge effect limits the edge compressive strength and stiffness of CIDH. Debonding is the main failure mode that limits both bending and compressive strength of CIDHSS. The reinforced plate added to the edge effectively improves the anti-debonding ability. [ABSTRACT FROM AUTHOR]

With the increase of demands for anti-collision performance in many fields, the negative Poisson's ratio structure has attracted the attention of researchers due to its light weight and high shear stiffness. Therefore, a new negative Poisson's ratio (NPR) structure named three-beam star honeycomb (TBSH) is proposed based on the classical star honeycomb (CSH). The stress equation of TBSH is derived by energy method, and its deformation characteristics and mechanical properties are studied. The results show that the structural deformation modes are different under different impact velocities, and TBSH has more obvious NPR effect. In addition, the influence of geometrical parameters on energy absorption of structures is also investigated. Finally, the thickness gradient is introduced into this structure, and the thickness gradient is optimized by multi-island genetic algorithm (MIGA). After optimization, the specific energy absorption (SEA) of the structure is significantly improved, while the initial peak stress (IPS) is decreased. The new structure proposed in this paper is expected to provide a novel design thinking and optimization idea for superstructure design. [ABSTRACT FROM AUTHOR]

The structure of non-pneumatic tire is complex and various, but its performance is superior to ordinary tire, so it has broad prospects. In this paper, a design method of honeycomb structure was proposed based on tangent method, and the hexagonal and circular honeycomb structure were established. The rules of displacement, radial stiffness and ground pressure of honeycomb structure with different density were studied. Meanwhile, the most basic bearing performance of non-pneumatic tire was analyzed by finite element method under static conditions. The results show that the radial stiffness of honeycomb increases with the increase of density. When the density is small, the bearing capacity of circular structure is stronger than that of hexagonal structure, the ground pressure decreases with the increase of density and the maximum stress of the two is located on the honeycomb structure. When the density is high, the maximum stress is on the contact surface between the rim and the inner circumference. This study provides a reference for other types of non-pneumatic tire structure design and builds the foundation to study contact performance analysis of non-pneumatic tire under complex working conditions. [ABSTRACT FROM AUTHOR]

Honeycomb structure containing curved reentrant sides with negative Poisson's ratio (NPR) was designed and the impact dynamics behaviors were studied by finite element method. The Poisson's ratio and the energy absorption capacity of the honeycomb structure with different arc angle were studied under different compression velocities. The results show that the Poisson's ratio of the honeycomb structure can reach −0.373 with arc angle of 180°. The energy absorption capacity of the honeycomb structure increased with an increasing compression velocity, and the deformation mode changed from X type to V type and I type. When the compression velocity is low, the dynamic response curve of the honeycomb structure with arc angle of 180° has the characteristics of two-stage plateau region. When the compression velocity is high, the energy absorption capacity of the honeycomb structure increased with an increasing arc angle. When the arc angle is higher than 120°, the honeycomb structure has NPR effect, and the energy absorption capacity of the honeycomb structure is better than the honeycomb structure with other arc angles. [ABSTRACT FROM AUTHOR]