Search

This paper focuses on a coordinated tracking planning method of multiple unmanned aerial vehicles (UAVs), which was deployed in the best positions to better fulfill the marine target localization tasks when approaching the target. The optimal planning of multi-UAVs was implemented using an online centralized nonlinear model predictive control (NMPC) based on the target state's uncertainty criteria. The penalty function is used to solve UAV platform dynamic performance in the model predictive control method to consider the more realistic situation. The coordinated planning problems of multi-UAVs are numerically simulated and compared with the Lyapunov vector field guidance (LVFG) method under classical mission scenarios. Simulation results demonstrate that the algorithm can maintain the optimal observation configuration of multi-UAVs to improve the marine target positioning accuracy, verifying the feasibility and superiority of this method. Furthermore, the simulation results can provide a useful reference for the flight control law design of multi-UAVs with optimal observation configuration. [ABSTRACT FROM AUTHOR]

Aiming at the problem of alignment deviation between shaft and hole caused by accumulated error in the assembly process of brake disc shaft hole, a trajectory planning method for compensating accumulated error is proposed. First, the path before the error is planned, and then the second compensation path is planned between the error position and the actual target point, so as to realize the accurate assembly of the brake disc. In this paper, the IRB 1410 robot is taken as the research object, and its kinematic model is established by using the improved D-H parameter method. The joint space quintic B-spline interpolation method was used to carry out trajectory planning, and the improved particle swarm optimization algorithm was introduced to solve the optimization. The optimal time and smooth trajectory were expected to be obtained. Then, using MATLAB software to simulate, compared with the nonoptimized trajectory, not only is the trajectory running time reduced from 8.6 s to 6.7 s but also the maximum joint change angle of each joint is reduced, which proves that the algorithm has optimization effect on trajectory running time and stability. Finally, the accuracy verification experiment of the algorithm is carried out, and the error between simulation and experiment is less than 6%, which shows the effectiveness of the method. This research provides a theoretical basis for improving the responsiveness and stability of brake disc assembly. [ABSTRACT FROM AUTHOR]

Aiming at the controllability of spin-stabilized projectile trajectory correction, a new two-dimensional trajectory correction projectile model with a controllable air-ducts structure suitable for the spin-stabilized projectile is proposed in this paper. Furthermore, control strategies of the projectile in the corrected configuration are studied to ensure a stable flight. The correction scheme of the projectile is innovated on the basis of the ram air control mechanism. The air-ducts structure is designed inside the projectile body, and the internal air valve is used to control the lateral air-jet to achieve trajectory correction of the projectile. This is a new two-dimensional trajectory correction scheme with a relatively simple control method. Firstly, the correction mechanism of the new air-ducts structure projectile is analyzed. Secondly, based on the dynamic equation of the projectile, the key parameters of the impulse air valve control, including the safe range of the working pulse width and frequency, are calculated, and the corresponding control strategies are proposed. Finally, the flow field of the projectile in the corrected configuration of the terminal trajectory is numerically simulated, and aerodynamic parameters of the projectile are obtained. Through stability conditions established in this paper and combined with aerodynamic parameters, the validity of the proposed projectile stable flight control strategies is confirmed. The innovations of this paper include: (1) a proposed new aerodynamic configuration model with the air-ducts structure for the spin-stabilized projectile and (2) proposed innovative stable flight control strategies of the corrected configuration projectile. The numerical simulation results show that, compared with the reference projectile without air-ducts structure, the lateral force of the air-ducts structure projectile can produce a radial correction effect on the moving projectile. The simulation results of control strategies indicate that the control strategies can ensure stable flight of the corrected configuration projectile under different conditions. [ABSTRACT FROM AUTHOR]

In this paper, an offline hybrid trajectory optimization approach is proposed for variable-sweep missiles to explore the superiority in the diving phase. Aiming at the maximal terminal velocity with the impact angle constraint, the trajectory optimization model is formulated under multiple constraints, and the aerodynamic analysis in different sweep angles is discussed. Unlike only the attack angle used for the optimization process traditionally, the two-variable optimization scheme on both the attack angle and sweep angle is investigated for variable-sweep missiles. Then, the trajectory optimization problem is transformed into the nonlinear programming problem via a hybrid optimization strategy combining the Gauss pseudospectral method and direct shooting method to obtain the high precision and fast convergence solution. Finally, to verify the feasibility of the optimal trajectory under uncertainties, the tracking guidance law is designed on basis of the gain scheduled linear quadratic regulator control. Numerical simulation results reveal not only of the proposed hybrid optimization strategy but also of the superiority of variable-sweep missiles compared with traditional missiles. [ABSTRACT FROM AUTHOR]

The trajectory information generated by the moving object plays an important role in studying the object movement. In this paper, a trajectory data compression algorithm based on the motion state changing is proposed to reduce trajectory data storage space and increase compression speed, which can accurately show the motion state and trajectory characteristics. This study has certain significance for the exploration of mass traffic data and the planning of traffic network. Combining the angle threshold with the velocity threshold of a moving object, the key data points are found and the redundant information is removed. Subsequently, the compressed trajectory is obtained. The experimental results show that the new algorithm can help to improve compression efficiency. The compressed trajectory has high similarity with the original trajectory in movement tendency. [ABSTRACT FROM AUTHOR]

A hybrid double-loop optimization algorithm combing particle swarm optimization (PSO) and nonintrusive polynomial chaos (NIPC) is proposed for solving the robust trajectory optimization of hypersonic glide vehicle (HGV) under uncertainties. In the outer loop, the PSO method searches globally for the robust optimal control law according to a penalized fitness function that contains the system robustness considerations. In the inner loop, uncertainty propagation of the stochastic system is performed using the NIPC method, to provide statistical moments for the iterative scheme of the PSO method in the outer loop. Only control variables are discretized, and the state constraints are satisfied implicitly through the numerical integration process, which reduces the number of decision variables as well as the huge amount of computation increased by NIPC. In the end, the robust optimal control law is achieved conveniently. Numerical simulations are carried out considering a classical time-optimal trajectory optimization problem of HGV with uncertainties in both initial states and aerodynamic coefficients. The results demonstrate the feasibility and effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

This paper presents a novel method of dynamic modeling and design optimization integrated with dynamics for parallel robot manipulators. Firstly, a computationally efficient modeling method, the discrete time transfer matrix method (DT-TMM), is proposed to establish the dynamic model of a 3-PRR planar parallel manipulator (PPM) for the first time. The numerical simulations are performed with both the proposed DT-TMM dynamic modeling and the ADAMS modeling. The applicability and effectiveness of DT-TMM in parallel manipulators are verified by comparing the numerical results. Secondly, the design parameters of the 3-PRR parallel manipulator are optimized using the kinematic performance indices, such as global workspace conditioning index (GWCI), global condition index (GCI), and global gradient index (GGI). Finally, a dynamic performance index, namely, driving force index (DFI), is proposed based on the established dynamic model. The described motion trajectory of the moving platform is placed into the optimized workspace and the initial position is determined to finalize the end-effector trajectory of the parallel manipulator by the further optimization with the integrated kinematic and dynamic performance indices. The novelty of this work includes (1) developing a new dynamic model method with high computation efficiency for parallel robot manipulators using DT-TMM and (2) proposing a new dynamic performance index and integrating the dynamic index into the motion and design optimization of parallel robot manipulators. [ABSTRACT FROM AUTHOR]

In this work, the concept of a multipurpose mission that can explore both the Moon and Mars with a single launch is proposed, and potential launch opportunities are analyzed to establish an early-phase trajectory concept. The proposed mission applies the concept of a piggyback ride to a small-sized lunar probe, i.e., the daughtership, of the main Mars orbiter, i.e., the mothership. For the trajectory design, the Earth-Moon-Mars gravity assist (EMMGA) trajectory is adopted for the mothership to reach Mars, and the daughtership is assumed to be released from the mothership during lunar flyby. To investigate the early-phase feasibility of the proposed mission, the launch windows have been analyzed and the associated delta-Vs have been directly compared with the solutions obtained for typical Earth-Mars direct (EMD) transfer options. The identified launch windows (in the years 2031 and 2045) could be the strongest candidates for the proposed conceptual mission. Under the current assumptions, up to approximately 15% (in 2031) and 9% (in 2045), more dry mass is expected to be delivered to Mars by appropriately selecting one of the currently available launch vehicles, regardless of whether the EMMGA transfer option is used. For missions around the Moon using a SmallSat in 2031, the feasibility of a lunar orbiter case and an impactor case is briefly analyzed based on the delta-Vs required to divert the SmallSat from the mothership. Although the current work is performed under numerous assumptions for a simplified problem, the narrowed candidate launch window from the current work represents a good starting point for more detailed trajectory design optimization and analysis to realize the proposed conceptual mission. [ABSTRACT FROM AUTHOR]

This paper presents the problem of robust finite-time H∞ control with transients for ocean surface vessels equipped with dynamic positioning (DP) system in presence of input delay. The main objective of this work is to design a finite-time H∞ state feedback controller, which ensures that all states of ship do not exceed a given threshold over a fixed time interval, with better robustness and transient performance subject to time-varying disturbance. Based on a novel augmented Lyapunov-Krasovskii-like function (LKLF) with triple integral terms and a method combining the Wirtinger inequality and reciprocally convex approach, a less conservative result is derived. In particular, an H∞ performance index with nonzero initial condition is introduced to attenuate the overconservatism caused by the assumption of zero initial condition and enhance the transient performance of ship subject to external disturbance. More precisely, the controller gain matrix for the DP system can be achieved by solving the linear matrix inequalities (LMIs), which can be easily facilitated by using some standard numerical packages. Finally, a numerical simulation for a ship is proposed to verify the effectiveness and less conservatism of the controller we designed. [ABSTRACT FROM AUTHOR]

By taking account of double-wishbone independent suspension with two unequal-length arms, the coordinate values of articulated geometry are based on structural limitations and constraint equations of alignment parameters. The sensitivities of front wheel alignment parameters are analyzed using the space analytic geometry method with insight module in ADAMS® software. The multiobjective optimization functions are designed to calculate the coordinate values of hardpoints with front suspension since the effect of time delay due to wheelbase can be easily obtained by vehicle speed. The K&C characteristics have been investigated using GA solutions in the simulation environment. The camber angle decreases from 1.152° to 1.05° and toe-in angle reduces from 1.036° to 0.944°. The simulation results demonstrate that the suggested optimization method is able to satisfy the suspension motion to enhance ride comfort. Experimental results, obtained by K&C test bench, also indicate that the optimized suspension can track the desired trajectory while keeping the vehicle performance in various road conditions. [ABSTRACT FROM AUTHOR]

Reentry trajectory optimization has been researched as a popular topic because of its wide applications in both military and civilian use. It is a challenging problem owing to its strong nonlinearity in motion equations and constraints. Besides, it is a high-dimensional optimization problem. In this paper, an improved chicken swarm optimization (ICSO) method is proposed considering that the chicken swarm optimization (CSO) method is easy to fall into local optimum when solving high-dimensional optimization problem. Firstly, the model used in this study is described, including its characteristic, the nonlinear constraints, and cost function. Then, by introducing the crossover operator, the principles and the advantages of the ICSO algorithm are explained. Finally, the ICSO method solving the reentry trajectory optimization problem is proposed. The control variables are discretized at a set of Chebyshev collocation points, and the angle of attack is set to fit with the flight velocity to make the optimization efficient. Based on those operations, the process of ICSO method is depicted. Experiments are conducted using five algorithms under different indexes, and the superiority of the proposed ICSO algorithm is demonstrated. Another group of experiments are carried out to investigate the influence of hen percentage on the algorithm’s performance. [ABSTRACT FROM AUTHOR]

Multiobjective trajectory optimization and adaptive backstepping control method based on recursive fuzzy wavelet neural network (RFWNN) are proposed to solve the problem of dynamic modeling uncertainties and strong external disturbance of the rubber unstacking robot during recycling process. First, according to the rubber viscoelastic properties, the Hunt-Crossley nonlinear model is used to construct the robot dynamics model. Then, combined with the dynamic model and the recycling process characteristics, the multiobjective trajectory optimization of the rubber unstacking robot is carried out for the operational efficiency, the running trajectory smoothness, and the energy consumption. Based on the trajectory optimization results, the adaptive backstepping control method based on RFWNN is adopted. The RFWNN method is applied in the main controller to cope with time-varying uncertainties of the robot dynamic system. Simultaneously, an adaptive robust control law is developed to eliminate inevitable approximation errors and unknown disturbances and relax the requirement for prior knowledge of the controlled system. Finally, the validity of the proposed control strategy is verified by experiment. [ABSTRACT FROM AUTHOR]

In order to improve the optimization accuracy and convergence rate for trajectory optimization of the air-to-air missile, a multi-interval mesh refinement Radau pseudospectral method was introduced. This method made the mesh endpoints converge to the practical nonsmooth points and decreased the overall collocation points to improve convergence rate and computational efficiency. The trajectory was divided into four phases according to the working time of engine and handover of midcourse and terminal guidance, and then the optimization model was built. The multi-interval mesh refinement Radau pseudospectral method with different collocation points in each mesh interval was used to solve the trajectory optimization model. Moreover, this method was compared with traditional h method. Simulation results show that this method can decrease the dimensionality of nonlinear programming (NLP) problem and therefore improve the efficiency of pseudospectral methods for solving trajectory optimization problems. [ABSTRACT FROM AUTHOR]

The rapid spreading of positioning devices leads to the generation of massive spatiotemporal trajectories data. In some scenarios, spatiotemporal data are received in stream manner. Clustering of stream data is beneficial for different applications such as traffic management and weather forecasting. In this article, an algorithm for Continuous Clustering of Trajectory Stream Data Based on Micro Cluster Life is proposed. The algorithm consists of two phases. There is the online phase where temporal micro clusters are used to store summarized spatiotemporal information for each group of similar segments. The clustering task in online phase is based on temporal micro cluster lifetime instead of time window technique which divides stream data into time bins and clusters each bin separately. For offline phase, a density based clustering approach is used to generate macro clusters depending on temporal micro clusters. The evaluation of the proposed algorithm on real data sets shows the efficiency and the effectiveness of the proposed algorithm and proved it is efficient alternative to time window technique. [ABSTRACT FROM AUTHOR]

An adaptive mesh iteration method based on Hermite-Pseudospectral is described for trajectory optimization. The method uses the Legendre-Gauss-Lobatto points as interpolation points; then the state equations are approximated by Hermite interpolating polynomials. The method allows for changes in both number of mesh points and the number of mesh intervals and produces significantly smaller mesh sizes with a higher accuracy tolerance solution. The derived relative error estimate is then used to trade the number of mesh points with the number of mesh intervals. The adaptive mesh iteration method is applied successfully to the examples of trajectory optimization of Maneuverable Reentry Research Vehicle, and the simulation experiment results show that the adaptive mesh iteration method has many advantages. [ABSTRACT FROM AUTHOR]

The problem of minimum time-jerk trajectory planning for a robot is discussed in this paper. The optimal objective function is composed of two segments along the trajectory, which are the proportional to the total execution time and the proportional to the integral of the squared jerk (which denotes the derivative of the acceleration). The augmented Lagrange constrained particle swarm optimization (ALCPSO) algorithm, which combines the constrained particle swarm optimization (CPSO) with the augmented Lagrange multiplier (ALM) method, is proposed to optimize the objective function. In this algorithm, falling into a local best value can be avoided because a new particle swarm is generated per initial procedure, and the best value gained from the former generation is saved and delivered to the next generation during the iterative search procedure to enable the best value to be found more easily and more quickly. Finally, the proposed algorithm is tested on a planar 3-degree-of-freedom (DOF) robot; the simulation results show that the algorithm is effective, offering a solution to the time-jerk optimal trajectory planning problem of a robot under nonlinear constraints. [ABSTRACT FROM AUTHOR]

As the advances in computer control technology keep emerging, robotic hydraulic excavator becomes imperative. It can improve excavation accuracy and greatly reduce the operator’s labor intensity. The 12-ton backhoe bucket excavator has been utilized in this research work where this type of excavator is commonly used in engineering work. The kinematics model of operation device (boom, arm, bucket, and swing) in excavator is established in both Denavit-Hartenberg coordinates for easy programming and geometric space for avoiding blind spot. The control approach is based on trajectory tracing method with displacements and velocities feedbacks. The trajectory planning and autodig program is written by Visual C++. By setting the bucket teeth’s trajectory, the program can automatically plan the velocity and acceleration of each hydraulic cylinder and motor. The results are displayed through a 3D entity simulation environment which can present real-time movements of excavator kinematics. Object-Oriented Graphics Rendering Engine and skeletal animation are used to give accurate parametric control and feedback. The simulation result shows that a stable linear autodig can be achieved. The errors between trajectory planning command and simulation model are analyzed. [ABSTRACT FROM AUTHOR]

A hybrid trajectory optimization method consisting of Gauss pseudospectral method (GPM) and natural computation algorithm has been developed and utilized to solve multiphase return trajectory optimization problem, where a phase is defined as a subinterval in which the right-hand side of the differential equation is continuous. GPM converts the optimal control problem to a nonlinear programming problem (NLP), which helps to improve calculation accuracy and speed of natural computation algorithm. Through numerical simulations, it is found that the multiphase optimal control problem could be solved perfectly. [ABSTRACT FROM AUTHOR]

To solve the multiobjective optimization problem on hypersonic glider vehicle trajectory design subjected to complex constraints, this paper proposes a multiobjective trajectory optimization method that combines the boundary intersection method and pseudospectral method. The multiobjective trajectory optimization problem (MTOP) is established based on the analysis of the feature of hypersonic glider vehicle trajectory. The MTOP is translated into a set of general optimization subproblems by using the boundary intersection method and pseudospectral method. The subproblems are solved by nonlinear programming algorithm. In this method, the solution that has been solved is employed as the initial guess for the next subproblem so that the time consumption of the entire multiobjective trajectory optimization problem shortens. The maximal range and minimal peak heat problem is solved by the proposed method. The numerical results demonstrate that the proposed method can obtain the Pareto front of the optimal trajectory, which can provide the reference for the trajectory design of hypersonic glider vehicle. [ABSTRACT FROM AUTHOR]

A Gauss pseudospectral method is proposed in this study to solve the optimal trajectory-planning problem for satellite rapid large-angle maneuvers. In order to meet the requirement of rapid maneuver capability of agile small satellites, Single Gimbal Control Moment Gyros (SGCMGs) are adopted as the actuators for the attitude control systems (ACS). Because the singularity problem always exists for SGCMGs during the large-angle maneuvering of the satellites, a trajectory optimization method for the gimbal rates is developed based on the Gauss pseudospectral method. This method satisfies the control requirement of satellite rapid maneuvers and evades the singularity problem of SGCMGs. The method treats the large-angle maneuver problem as an optimization problem, which meets the boundary condition and a series of the physical constraints including the gimbal angle constraint, the gimbal rates constraint, the singularity index constraint, and some other performance criteria. This optimization problem is discretized as a nonlinear programming problem by the Gauss pseudospectral method. The optimal nonsingularity gimbal angle trajectory is obtained by the sequence of quadratic programming (SQP). This approach avoids the difficulties in solving the boundary value problem. The simulations reveal that the Gauss pseudospectral method effectively plans an optimal trajectory and satisfies all the constraints within a short time. [ABSTRACT FROM AUTHOR]

The lunar landing stage is usually divided into two parts: deorbit burn and powered descent phases. The optimal lunar landing problem is likely to be transformed to the trajectory design problem on the powered descent phase by using continuous thrusters. The optimal lunar landing trajectories in general have variety in shape, and the lunar lander frequently increases its altitude at the initial time to obtain enough time to reduce the horizontal velocity. Due to the increment in the altitude, the lunar lander requires more fuel for lunar landing missions. In this work, a hybrid engine for the lunar landing mission is introduced, and an optimal lunar landing strategy for the hybrid engine is suggested. For this approach, it is assumed that the lunar lander retrofired the impulsive thruster to reduce the horizontal velocity rapidly at the initiated time on the powered descent phase. Then, the lunar lander reduced the total velocity and altitude for the lunar landing by using the continuous thruster. In contradistinction to other formal optimal lunar landing problems, the initial horizontal velocity and mass are not fixed at the start time. The initial free optimal control theory is applied, and the optimal initial value and lunar landing trajectory are obtained by simulation studies. [ABSTRACT FROM AUTHOR]