Search

We propose a strategy to solve the tracking and regulation problem for a 2DOF underactuated mass-spring-damper system with backlash on the underactuated joint, parametric uncertainties, and partial measurement of the state vector. The design of the controller is divided into two stages; in the first stage, it is assumed that the full state vector and all perturbations in the system are available. The model is divided into one actuated subsystem and one underactuated subsystem. The position of the actuated mass is defined as the control input of the underactuated subsystem, which is designed as an ideal controller that solves the tracking and regulation control problems for the underactuated mass. Finally, the control input of the actuated subsystem is designed to solve the tracking problem considering as a reference signal the control signal of the underactuated subsystem. The second stage solves the problem of the implementation of the previously designed ideal controller using the active disturbances rejection control structure (ADRC). Here state observers estimate the nonmeasured state variables and, at the same time, estimate perturbations and auxiliary signals for their compensation. The performance of the closed-loop system is illustrated by numerical simulations and experimental results. [ABSTRACT FROM AUTHOR]

Sliding mode control (SMC) is rapped for the chattering due to high gain control. However, high gain control causes the system robust. For developing a system with robustness of SMC, a servo motor motion controller combining the two-degree-of-freedom (2DOF) system and SMC is proposed. The discussed motion type is point-to-point control with the constraint of trapezoid velocity profile. SMC is designed to guide the motor motion to follow a predefined trail, and the inner 2DOF system is used to compensate the deterioration due to the adoption of load observer. The proposed hybrid system is realized on a PC-based motion controller, and the validness is verified by simulation and experimental results. [ABSTRACT FROM AUTHOR]

A two-degree-of-freedom control structure is proposed for a class of unstable processes with time delay based on modified Smith predictor control; the superior performance of disturbance rejection and good robust stability are gained for the system. The set-point tracking controller is designed using the direct synthesis method; the IMC-PID controller for disturbance rejection is designed based on the internal mode control design principle. The controller for set-point response and the controller for disturbance rejection can be adjusted and optimized independently. Meanwhile, the two controllers are designed in the form of PID, which is convenient for engineering application. Finally, simulation examples demonstrate the validity of the proposed control scheme. [ABSTRACT FROM AUTHOR]