Search

Antimicrobial Polyvinyl chloride (PVC) was obtained by covalent bonding of zinc oxide nanoparticles, which have gained important achievements in antimicrobial fields because of their auspicious properties. This was achieved by grafting mercaptopropyltrimethoxysilane onto PVC, followed by the growth of zinc oxide nanoparticles covalently bonded on the polymer surface. In this study, the relationship between the physicochemical features of modified-surface PVC and antimicrobial activity on Staphylococcus aureus and Candida albicans was investigated. Zinc oxide with controllable morphologies (rods, rod flowers, and petal flowers) was synthesized on the polymer surface by tuning merely base-type and concentration using a hydrothermal process. The antimicrobial activity was more pronounced for rod flower morphology, because of their differences in microscopic parameters such as specific Zn-polar planes. This work provides an important hint for the safe use of PVC for biomedical devices by the structure surface tuning without injuring polymer bulk properties and a reduced risk of the covalently bonded nanoparticle dispersion in the host and the environment., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Zinc oxide (ZnO) nanostructures have been widely studied in biomedical fields due to their special properties. In recent years, ZnO spherical nanoparticles (SNPs) with nano-size as an anti-tumor agent have been widely concerned. While the effects of the non-spherical shaped ZnO nanoparticles on tumor cell death have been rarely reported. Here, we prepared ZnO spiky nanoparticles (SPNPs) as the research subject. We found that the SPNPs showed superiority in killing tumor cells. To be specific, SPNPs presented a long-term cytotoxicity effect on killing tumor cells, as plenty of SPNPs retained on the cell plasma membrane's exterior and still showed toxicity effect on tumor cells after co-incubation multiple times. Moreover, compared to SNPs, it was encouraging that SPNPs still showed stronger cytotoxicity in both simulated circulatory systems of tumor cells and 3D tumor cell spheroids. The stronger toxicity against tumor cells suggested that ZnO SPNPs have more advantages on killing tumor cells as a promising nanomedicine., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Nanostructured Zn 1-x Yb x O (0.0 ≤ x ≤ 0.1) powders were prepared by the solution method using polyvinyl alcohol (PVA) and sucrose. The effect of the ytterbium doping content on the structural, morphological, optical and antimicrobial properties was analyzed. X-ray diffraction (XRD) analysis revealed that the hexagonal wurtzite structure was retained, and no secondary phases due to doping were observed. The crystallite size was under 20 nm for all the Zn 1-x Yb x O (0.0 ≤ x ≤ 0.1) powders. The optical band gap was calculated, and the results revealed that this value increased with the ytterbium content, and the E g values varied from 3.06 to 3.10 eV. The surface chemistry of the powders was analyzed using X-ray photoelectron spectroscopy (XPS), and the results confirmed the oxidation state of ytterbium as 3+ for all the samples. Zn 1-x Yb x O (0.0 ≤ x ≤ 0.1) nanoparticles were tested as antimicrobial agents against Staphylococcus aureus and Escherichia coli, resulting in a potential antimicrobial effect at most of the tested concentrations. These results were used in an artificial neural network (ANN). The results showed that it is possible to generate a model capable of forecasting the absorbance with good precision (error of 1-2%)., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Development of biologically inspired green synthesis of silver nanoparticles has been extensively scrutinized owing to its uses in biomedical industry. In the last two decades, the demands of nanomaterial in bone remodelling have increased. Scutellaria baicalensis is a flowering plant usually used for many ailments. This work explores the zinc oxide nanoparticles (ZnO NPs) by green route method from S. baicalensis and the therapeutic potentials of Sb-ZnONPs on differentiation of osteoblast and osteoclast formation inhibition. The characterization of the fabricated ZnO-NPs from S. baicalensis was done via different spectroscopic and microscopic techniques; ultraviolet-visible spectroscopy (UV-Vis), Fourier transform-infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), and dynamic light scattering (DLS). The Osteogenic-related tests (MTT, Mineralization assay and Real-time PCR) were used to evaluate the properties of SB-ZnONPs on the growth and proliferation of human osteoblast-like MG-63 cells. The characterization of SB-ZnONPs discovered the crystalline properties with high zinc content and the existence of bioactive mixtures from S. baicalensis extract. In addition, SB-ZnONPs showed insignificant cytotoxicity with enhanced differentiation, proliferation, and mineralization on MG-63 cells. Overall, these results denote that SB-ZnONPs is expected to be a natural source for the development of medical agents to in bone healing and remodelling., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Despite of broad range application, the cost effective, highly stable and reproduceable synthesis of ZnO is needed, especially which can make it biosafe as well. Here, a unique bioinspired synthesis of ZnO nanoflowers (NFs) has been introduced using Withania coagulans extract as reducing agent. Different molar concentrations were assessed to counter the effect of structural, morphological, antibacterial activity and high efficiency of algae harvesting. The UV-spectroscopy authenticates the synthesis of ZnO NFs having Wurtzite hexagonal structure with the size in the range of 360-550 nm. While surface analysis revealed the presence of stabilizing agent like phenolic, amine, etc. on surface of ZnO NFs. These perineum ZnO NFs exhibited a stronger antibacterial with Gram-positive bacteria Staphylococcus aureus as compare to Gram-negative bacteria Pseudomonas aeruginosa and greater harvesting efficiency up to 94% on the account of greater surface area and unique surface chemistry, thus leading a new horizon of more efficient and effective applications for ethanol production., (Copyright © 2020. Published by Elsevier B.V.)

The Structural properties of Zinc oxide nanoparticles (ZnO-NPs) as well as their antibacterial properties against Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli and Pseudomonas aeruginosa; as well as bacteria that are usually found in the mouth of humans and are related to dental conditions, such as Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Prevotella intermedia, Streptococcus mutans and Streptococcus sanguinis, are presented in this report. ZnO-NPs were grown by green synthesis, using the Mexican plant Dysphania ambrosioides known in Mexico as "epazote", which was used by native populations of Mexico as a dewormer, is currently used widely in traditional Mexican cuisine and is rich in organic compounds as flavonoids and terpenes which may favor the synthesis of nanoparticles (NPs). ZnO-NPs were synthesized by the mentioned technology and were compared with commercial ZnO-NPs as a reference. Synthesized and commercial ZnO-NPs were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray energy dispersive spectroscopy (EDS), Fourier transformed infrared spectroscopy (FTIR) and thermogravimetry (TG). Antibacterial properties were evaluated using a disc diffusion test (Kirby-Bauer method). The results indicate that ZnO-NPs were synthesized in the size range of 5-30 nm. The presence of the ZnO crystalline phase was identified by high resolution transmission electron microscopy (HRTEM) and XRD analysis. The commercial ZnO-NPs were in the size range of 15-35 nm. The antibacterial test indicates that most of the bacterial strains used in this study were sensitive to synthesized and commercial NPs, with Prevotella intermedia being the most sensitive to ZnO-NPs., (Copyright © 2020 Elsevier B.V. All rights reserved.)

In order to improve the biological activity and antibacterial activity of magnesium alloy, the single zinc oxide (ZnO) coating was prepared on magnesium alloys using microwave aqueous synthesis method and followed heat treatment. Then, the coated magnesium alloys were irradiated with ultraviolet (UV) light for different time and subsequently immersed in simulated body fluids (SBF). The influences of UV-irradiated time on the morphology, composition, in vitro biological activity and antibacterial activity were investigated. The results indicated that the ability of the apatite formation on the ZnO coated magnesium alloys surface was significantly enhanced as UV irradiation time prolonged, and the bone-like apatite was formed after UV irradiation for 24 h and then immersing into SBF for 2 weeks, the newly formed apatite was dense and integrate, implying that UV irradiation could activate ZnO coating to improve the biological activity. Moreover, after immersing in SBF for 2 weeks, the antibacterial experiment results demonstrated that ZnO coated magnesium alloys with UV irradiation time of 24 h exhibited more effective antibacterial activity than those of naked magnesium alloys and ZnO coated magnesium alloys which were not irradiated by ultraviolet (UV) light. This work afforded a surface strategy for designing magnesium alloy implant with desirable osseointegration ability and antibacterial property simultaneously for orthopedic and dental applications., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Sprayable bioadhesives with exceptional properties were developed for application in wound healing. In this study, a visible light-crosslinkable nanocomposite bioadhesive hydrogel with multifunctional properties was proposed. While methacrylated Kappa-carrageenan (KaMA), mimicking the natural glycosaminoglycan was applied as the hydrogel matrix, various concentrations of polydopamine modified ZnO (ZnO/PD) nanoparticles (0, 0.5, 1 and 2 wt%) was loaded in it to improve its mechanical, antibacterial and cellular properties. Moreover, L-glutamic acid was incorporated in the nanocomposite hydrogel network to accelerate wound healing. The nanocomposite hydrogels revealed significant mechanical property and recovery ability, comparable elasticity with human skin and great adhesiveness. For instance, the tensile strength of KaMA hydrogel enhanced from 64.1 ± 10 to 80.3 ± 8 kPa and elongation jumped from 20 ± 4% to 61 ± 5% after incorporation of 1 wt% ZnO/PD nanoparticles. The nanocomposite hydrogels demonstrated effectual blood clotting ability and biocompatibility, >95% cell viability after 3 days of incubation. In vivo experiments also suggested that L-glutamic acid loaded nanocomposite hydrogel considerably accelerated wound healing with superior granulation tissue thickness than control in a full-thickness skin defect model. Taken together, this visible-light crosslinking nanocomposite hydrogel with significant properties could be used to spray on a wound area to eliminate wound infection and accelerate wound healing process., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

In this work, a new pH-responsive nanohybrid carrier was prepared with chelating ZnO-dopamine (Zn-d) on the surface of graphene oxide. Doxorubicin (DOX) as a model drug was loaded on the resulted nanohybrid. The characteristics of Zn-d-rGO nanohybrid (NH) determined using Fourier transformed infrared spectroscopy (FT-IR), X-ray Diffraction spectroscopy (XRD), UV-Visible spectroscopy, Scanning Electron Microscope (SEM), EDX and AFM. The BET analysis showed a specific surface area of 37.16 m 2 /g and the obtained nanohybrid indicated a high loading capacity of DOX up to 99.7%, and the release profile displayed a pH-dependent discharge in the acidic environment for14 days. The cytotoxicity of the prepared nanohybrid was measured against T47D and MCF10A cells and it confirmed that as-prepared nanohybrid has high toxicity against cancer cells and lower effect against human breast cell. Meanwhile, the prepared nanohybrids showed well antimicrobial activity against gram-positive and negative bacteria. The obtained results showed that the prepared nanohybrid (Zn-d-rGO) could potentially be used as a safe carrier for drug delivery systems., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Although silver based nanofibers possess excellent bactericidal and bacteriostatic characteristics. However, excess release/contact with silver may induce harmful side-effects including carcinoma, argyria, argyrosis and allergies. Similarly, silver depletion may limit prolonged antibacterial activities as well. Thus present research proposes electrospun CA/ZnO/AgNPs composite nanofibers for biologically safer and sustained antibacterial applications. The ZnO/AgNPs were synthesized using dopamine hydrochloride (Dopa) as reducing agent to immobilize AgNPs on ZnO nanoparticles. A simple solution-mixing procedure effectively generated AgNPs on ZnO nanoparticles. Strong adhesive characteristics of Dopa initiate adsorption of silver ions on ZnO nanoparticle surfaces and its metal ion reducing properties generate AgNPs. Additionally, the Dopa mediation generates strongly adhered AgNPs. The ZnO/AgNPs were used to fabricate CA/ZnO/AgNPs nanofibers. Characterization techniques, XRD, XPS, TEM, FTIR and SEM confirmed synthesis of nanocomposites. Crystallite sizes of ZnO and AgNPs calculated by Debye-Scherrer equation were 17.85 nm and 11.68 nm respectively. Antibacterial assays confirmed CA/ZnO/AgNP's effectiveness in growth inhibition of E. coli and S. aureus strains on agar plate and in liquid medium. The nanofiber composites demonstrated 100% bactericidal properties against both the test strains. Bacterial growth inhibition in LB medium for 108 h indicated suitability of CA/ZnO/AgNPs composite nanofibers in sustained antibacterial applications such as antibacterial wound dressings and other applications demanding sustained antimicrobial properties., (Copyright © 2019 Elsevier B.V. All rights reserved.)

This is a report on the antibacterial activity of ZnO and CuO nanoparticles synthesized via sol-gel method. The studies were performed on Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli and Pseudomonas aeruginosa bacteria using disc and well diffusion methods, bioluminescence and optical density analysis. The results show a strong decline of bacterial strains after a short contact with nanoparticles. The modelling allowed clarifying the bacterial sensitivity of toxic agents at different stages of their population evolution kinetics. It was concluded that the bacterial suppression is most effective at the exponential growth phase while it is of a lower effectiveness at the lag and stationary phases. The CuO and ZnO nanoparticles showed comparable effectiveness at the exponential growth phase. In the same time, ZnO was almost inactive at the lag phase and of lower effectiveness at the stationary phase, at which CuO conserved a significant activity., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Strategies for developing materials with the functionality to combat bacterial infection are targets for applications such as smart bandages and bone tissue integration. This work milestone was to develop ZnO-polyetherimide (ZnO/PEI) composite scaffolds with antibacterial activity against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria. The electrospinning process using suspensions of PEI with different ZnO nanoparticles content were heightened to promote spinnability, jet stability, and fibers with morphological homogeneity. Simulating harsh environments (laser ablation and solvent corrosion) was employed onto specimens and antibacterial functionality, morphology variations, contact angle, and tensile strength variability were evaluated. The antibacterial outcomes, accessed by a modified version of the Japanese Industrial Standard (JIS) Z 2801, presented an inhibition rate up to 100 and 99% after 24 h for S. aureus and E. coli, respectively. The treated samples presented alike responses against both bacteria, highlighting the robustness of the developed scaffolds., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Development of novel approach for cancer therapy, sparing healthy normal cells overcoming the limitation of available therapies is of prime importance for cervical cancer treatment. Recently metal oxide based chemotherapeutics has emanated as a promising approach for cancer therapy. Hence, the present study was carried out to assess the anticancer potential of zinc oxide nanoparticles (ZnONPs) synthesized using biogenic source, aqueous extract of Gracilaria edulis. The prepared ZnONPs were characterized using UV-Visible spectroscopy, FTIR, XRD, FESEM, EDX and HRTEM. The anticancer potential of ZnONPs against cervical cancer cell lines (SiHa cells) was evaluated using MTT and the mechanism of apoptosis was evaluated using various staining techniques. UV-Vis spectroscopy exhibited absorption band at 367 nm specific for ZnONPs and the average energy gap was calculated as 3.37 eV. Further characterization by XRD, TEM, and FESEM illustrated the formation of wurtzite structure (hexagonal phase) with size ranging between 20 and 50 nm. EDS of SEM analysis confirmed the presence of Zn and O, which was further substantiated by XPS analysis. PL emission studies showed UV emission peak at 387 nm and broad visible emission peak at 520 nm. Zeta potential value of -28.2 mV depicted the stability of ZnONPs in the dispersion medium. Results of anticancer potential illustrated that ZnONPs exhibited cytotoxic effect against SiHa cells in a dose dependent manner with IC 50 value of 35 ± 0.03 μg/ml. AO/EtBr dual staining, JC-1 staining, Hoechst 33258 nuclear staining and comet assay illustrated the ZnONPs induced ROS mediated mitochondrial dependent apoptotic cell death in SiHa cells. Further, flow cytometric analysis using Annexin V/FITC dye demonstrated that ZnONPs induced both apoptotic and necrotic mediated death in SiHa cells. Over all the results conclude that ZnONPs synthesized using algal sources might act as a new medicinal approach for the treatment of cervical carcinoma in conjugation with the current therapy., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Zinc Oxide (ZnO) is currently used in nano-cosmeceuticals and nano-pharmaceuticals topically due to their multifunctional efficiency irrespective of the synthetic method. Bio-reducers are cosmopolitically famed to attain stable, reliable, and toxic free synthesis. Thus, the objective of the current study is to prepare ZnO NPs in a greener approach using Annona squamosa (AS) leaf extract and to evaluate their antibiotic potentiation capacity and anticancer activity. The novel synthetic process of ZnO NPs was performed without using any chemicals (reducing or stabilizing agents) or high temperature processing under continuous stirring and refluxion in the presence of oxygen environment. AS have renowned phytochemicals with medicinal properties. Therefore, the mounting of secondary metabolites onto ZnO NPs during synthesis as reducing, stabilizing, capping agents may impart additional biomedical efficacy. The ZnO NPs were prepared with the assessment of stabilization (characteristic peak at 375 nm) from absorbance spectra. Further, SEM, TEM, XRD, FTIR, and Raman analysis of AS-ZnO NPs were performed to elucidate the size, shape, nature, chemical structure and composition. The characterization techniques revealed particles of 20-50 nm size, hexagonal shaped crystalline structure with diverse phytochemicals and functional groups. In addition, AS-ZnO NPs were investigated for antibacterial activity along with antibiotic potentiating capability through combinational assay. Furthermore, the anticancer potential of AS-ZnO NPs was evaluated against HeLa cell line along with assessment of biocompatibility on HEK-293 cell line using MTT assay. Based on the findings, our study exploits green-synthesized ZnO NPs as an effective strategy for potentiation of antibiotic activity and anticancer activity in a biocompatible perspective., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The purpose of this study was to investigate the radiation dose enhancement effects of gadolinium-doped zinc oxide nanoparticles (Gd-doped ZnO NPs) under the megavoltage (MV) X-ray irradiation. ZnO NPs have preferred photocatalytic properties under UV light for cancer killing. UV light has limited applications in cancer treatment and it is necessary to use X-ray photons with MV energies. In order to increase the absorption of radiation and also to enhance the imaging visualization capabilities of ZnO NPs, gadolinium (Gd) as a high atomic number element was selected for doping into the structure of ZnO NPs. Gd-doped ZnO NPs were synthesized by a chemical precipitation method and characterized by transmission electron microscopy, powder X-ray diffraction, ultraviolet-visible spectroscopy, and energy-dispersive X-ray techniques. Cellular uptake was assessed by TEM and inductively coupled plasma mass spectrometry. NPs cytotoxicity was analyzed by MTT assay and radiation dose enhancement was measured by clonogenic survival assay. Apoptosis induction, cell cycle progression, micronucleus formation and expression of DNA double-strand break repair genes of XRCC2 and XRCC4 were determined by flow cytometry, micronucleus assay, and quantitative real-time polymerase chain reaction. CT and MR imaging were used to analyze the image visualization capabilities of NPs. NPs characterization showed that highly pure crystalline Gd-doped ZnO NPs with a narrow size distribution and grain size of 9 nm were synthesized. Gd-doped ZnO NPs were distributed in the cells and showed dose-dependent toxicity. Combination of Gd-doped ZnO NPs with 6 MV X-rays induced dose-dependent radiosensitivity with sensitizer enhancement ratios (SER) of 1.47 and 1.61 for 10 and 20 μg/mL NPs concentrations. Cancer cells blocked in G1, apoptosis rates, and micronuclei formation was enhanced and inversely, the DNA repair efficiency was impaired by down regulation of the mRNA levels of XRCC2 and XRCC4 genes. Gd-doped ZnO NPs enhanced the contrasts of CT and MR images of cancer cells. Overall, the results of this study provide detailed biological insights on the dose enhancement of Gd-doped ZnO NPs at MV radiations, which would contribute to the further development of this potent theranostic platform for clinical applications., (Copyright © 2019. Published by Elsevier B.V.)

Non-spherical structures are beneficial to advance drug delivery effectiveness compared with common spherical ones, due to increased drug loading capability, improved bonding to a vascular wall, enhanced cellular uptake efficacy and prolonged circulation times. In this study, flower-like Zinc oxide-βcyclodextrin (βCD) nanostructures functionalized by 3-mercaptopropionic acid (MPA) as a non-spherical delivery system was successfully synthesized for aqueous delivery of curcumin (CUR) to enhance its targeting, bioavailability, and release profile. Terminal carboxyl functional groups were used for the conjugation of folic acid (FA) with the aim of active targeting to folate overexpressing breast cancer cells. The in vitro experimental study and mathematical modeling of CUR release revealed a sustained release with Fickian diffusion as the major release mechanism. MTT, colony formation and Annexin-V FITC/PI assays showed the superior anticancer effect of the system compared to free CUR against breast cancer cell line MDA-MB-231 by promoting the apoptotic respond with no cytotoxic effect on HEK293 normal cells. The efficacy of targeting strategy with FA moieties was demonstrated using the augmented cellular uptake of the FA-conjugated system on overexpressed folate receptor alpha (FRα) cells (MDA-MB-468 breast cancer cell line). Furthermore, loading of CUR to the delivery systems significantly lowered the MIC values (2.5 to 5-fold) against S. aureus and E. coli the infections of which are serious problems in cancer patients. According to the results of this study, the system can serve as a promising non-spherical delivery vehicle for enhancing bioavailability and targeting of hydrophobic anticancer agents in the future., (Copyright © 2019 Elsevier B.V. All rights reserved.)

In this present work, Zinc oxide (ZnO) nanorods (NRs) were synthesized by bio-mediated approach. The Ricinus communis L. leaf extract act as reducing as well as capping agent for the synthesize of ZnO NRs. The crystalline nature and phase purity of the as prepared ZnO NRs were identified by the Powder X-ray Diffraction (PXRD) studies. The formation of ZnO NRs was determined by the optical analysis. The morphological studies of the synthesized materials were identified by the Field Emission Scanning Electron Microscopy (FESEM) analysis. In this investigation, the antibacterial activity of ZnO NRs were tested against both Gram positive (Staphylococcus aureus, Bacillus subtilis) and Gram negative (Salmonella paratyphi, Escherichia coli) bacteria by agar disc diffusion method. In addition, the green synthesized ZnO NRs exhibits excellent antimicrobial activity than the chemically synthesized method., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The field of nanoscience or nanotechnology is gaining popularity day by day and it is now well established field of interdisciplinary sciences. Nanoparticles are synthesized by various methods but suffer from few limitations such as toxicity. To overcome the limitations of various synthesis methods, the focus has shifted to new radius which involves biological organisms such as plants i.e. green synthesis. This phyto-mediated approach using various plant parts and extracts thereof, is considered to be new, simple and cheaper strategy to synthesize metal nanoparticles. In the present work, we describe a simple, eco-friendly and low-cost procedure for biosynthesis of zinc oxide nanoparticles (ZnO NPs) using leaf extract of medicinally important plant, Berberis aristata. The synthesized zinc oxide nanoparticles was subsequently characterized by using UV-Visible spectroscopy, X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Analysis (EDX) and Dynamic Light Scattering (DLS) which proved the synthesized ZnO NPs to fall in the range of nanoparticles. Synthesized ZnO NPs were further characterized and screened for antimicrobial and antioxidant activity. ZnO NPs displayed antibacterial activities against Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, Bacillus subtilis, Bacillus cereus, Serratia marcescens but not for Proteus and Salmonella Typhi. ZnO NPs displayed antibacterial activities and moderate antioxidant potential. Our results display the synthesized ZnO NPs to fall in an important class of potential antibacterial, antioxidant agents and effective against urinary tract infections., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Zinc oxide nanostructures (ZnO-NS) have shown to be of great value for several biological and biomedical applications. In particular, they have been used in bioimaging and delivery applications as well as inhibitors of microbial growth. In this work a new methodology for producing highly crystalline, size controlled ZnO-NS using a chemical microwave assisted synthetic route is described. A wide range of sizes and shapes of ZnO-NS could be controlled by varying the molar ratio of zinc nitrate to hexamethylenetetramine (HMT) from 3:20 to 30:20. The produced ZnO-NS systematically changed from 25 nm spherical nanoparticles to well-shaped micro sized hexagonal nanorods. Pronounced oxygen defects were also noticed, particularly at higher molar ratios. However, this is not the case with the lattice constant c, whose value is found to decrease by increasing this ratio. The produced ZnO-NS were tested as antimicrobial agent against Gram-negative (E. coli), Gram-positive (B. subtilis) bacteria and yeast (S. cerevisiae). Significant inhibition of these microbial strains was noticed even at low concentrations of ZnO-NS. The ZnO-NS with the molar ratio 3:20 was the most effective against the microbes tested. The results showed 80, 71 and 50% inhibition of E. coli, B. subtilis and S. cerevisiae, respectively. Using the "surfactant stress model" we describe the nanostructure formation of ZnO-NS. The antimicrobial activity of ZnO-NS correlated well with lattice constant c and particle size, where smaller particles with higher value of c displayed increase inhibitory activity. No clear correlation between the oxygen defects and bacterial inhibitions was observed. This highly crystalline, size tunable ZnO-NS could prove to be effective antimicrobial agents at low concentrations (e.g. 20 μg per 10 mL) and might be tested against other microorganisms., (Copyright © 2019. Published by Elsevier B.V.)

This article reports the excellent antimicrobial response of nanoparticulate ZnO against multidrug-resistant organisms (MDROs). We demonstrate that the enhanced antimicrobial activity against MDROs depends on the crystalline defects of ZnO. Hence, this work provides insights on the ZnO-microorganism interactions, and we pose combined physico-chemical action mechanisms against resistant bacteria., (Copyright © 2019 Elsevier B.V. All rights reserved.)

In this work we compare the antifungal capacity of zinc oxide nanoparticles (ZnO-NPs) synthesized by a chemical route and a ZnO-based nanobiohybrid obtained by green synthesis in an extract of garlic (Allium sativum). To find out the characteristics of the materials synthesized, X-ray diffraction (XRD), IR spectroscopy and absorption in UV-Vis were used, as well as both scanning (SEM) and transmission (TEM) electron microscopy. The results showed that the samples obtained were of nanometric size (<100 nm), with a predominance of the wurtzite crystal phase of ZnO and little crystallization of the nanobiohybrids. Their antifungal capacity on two pathogenic fungi of coffee, Mycena citricolor (Berk and Curt) and Colletotrichum sp. was also evaluated. Both nanomaterials showed an efficient antifungal capacity, particularly the nanobiohybrids, with ~97% inhibition in growth of M. citricolor, and ~93% for Colletotrichum sp. The microstructural study with high resolution optical (HROM) and ultra-structural microscopy (using TEM) carried out on the fungi treated with the synthesized nanomaterials showed a strong nanofungicidal effect on the vegetative and reproductive structures and fungal cell wall, respectively. The inhibition of the growth of the fungi and micro and ultra-structural affectations were explained considering that the size of the nanomaterials allows them to pass easily through the cell membranes. This indicates that they can be absorbed easily by the fungi tested here, causing cellular dysfunction. Nanofungicide effects are also attributable to the unique properties of nanomaterials, such as the high surface-to-bulk ratio of atoms and their surface physicochemical characteristics that could directly or indirectly produce reactive oxygen species (ROS), which affect the proteins of the cell wall., (Published by Elsevier B.V.)

Green synthesis of ZnO nanoparticles (NPs) using the plants' extract and their potential application have driven a tremendous interest in recent years. This study reports a green microwave-assisted method for synthesis of ZnO NPs using Silybum marianum L. seed extract. Characteristics of the as-prepared sample was explored in terms of crystalline phase, morphology, composition, surface area, optical, and thermal properties. The particles of the biosynthesized sample (ZnO/extract) had smaller sizes than the chemically produced one (ZnO). The existence of biomolecules from Silybum marianum L seed extract linked to the ZnO/extract sample was approved by various analyses. The ZnO/extract sample was used for treating alloxan-induced diabetic rats and its efficiency was compared with ZnO, extract, and insulin treatments. For this purpose, the levels of blood glucose, insulin, total cholesterol, total triglyceride, and high-density lipoprotein were measured before and after treating with the studied treatment agents and compared with each other. Moreover, the antibacterial activities of both ZnO samples were investigated against E. coli to assess their potential antibacterial application. From the results, ZnO/extract NPs represented an outstanding performance in overcoming the diabetic disorders and good antibacterial activity against the studied bacteria., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Metal oxide nanoparticles are a new class of important materials used in a wide variety of biomedical applications. Bulk zinc oxide (ZnO) particles have been used for temporal or permanent luting cement because of their excellent mechanical strength and biocompatibility. ZnO nanoparticles have distinct optical and antibacterial properties and a high surface-to-volume ratio. We investigated the mechanical and antibacterial properties of luting cement with different ratios of ZnO nanospheres. We showed that luting cement with 5% and 10% ZnO nanospheres was less soluble in low-pH (pH 3) artificial saliva. Antibacterial activity was 40% higher for Streptococcus mutans and 90% higher for Porphyromonas gingivalis when >10% (w/v) of the bulk particles were replaced with ZnO nanospheres in ZnO polycarboxylate cement. ZnO nanospheres were also biocompatible with mammalian cells. Additionally, the compressive strength was 1.2 times greater and the diametral tensile strength was 1.5 times greater for cements with 10% ZnO nanospheres than for conventional ZnO polycarboxylate cement. We propose a new method for improving dental luting cement by integrating it with ZnO nanospheres. This method simultaneously adds their greater antibacterial, mechanical, and acid resistance properties and retains an outstanding degree of biocompatibility., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Far-flung evolution in tissue engineering enabled the development of bioactive and biodegradable materials to generate biocomposite nanofibrous scaffolds for bone repair and replacement therapies. Polymeric bioactive nanofibers are to biomimic the native extracellular matrix (ECM), delivering tremendous regenerative potentials for drug delivery and tissue engineering applications. It's been known from few decades that Zinc oxide (ZnO) nanoparticles are enhancing bone growth and providing proliferation of osteoblasts when incorporated with hydroxyapatite (HAp). We attempted to investigate the interaction between the human foetal osteoblasts (hFOB) with ZnO doped HAp incorporated biocomposite poly(L-lactic acid)-co-poly(ε-caprolactone) and silk fibroin (PLACL/SF) nanofibrous scaffolds for osteoblasts mineralization in bone tissue regeneration. The present study, we doped ZnO with HAp (ZnO(HAp) using the sol-gel ethanol condensation technique. The properties of PLACL/SF/ZnO(HAp) biocomposite nanofibrous scaffolds enhanced with doped and blended ZnO/HAp were characterized using Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), Contact angle and Tensile studies to determine the morphology, functionality, wettability and stability. The in vitro study results showed that the addition of ZnO and HAp enhances the secretion of bone mineral matrix (98%) with smaller fiber diameter (139.4 ± 27 nm) due to the presence of silk fibroin showing potential tensile properties (322.4%), and increased the proliferation of osteoblasts for bone tissue regeneration., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Up to date, tissue regeneration of large bone defects is a clinical challenge under exhaustive study. Nowadays, the most common clinical solutions concerning bone regeneration involve systems based on human or bovine tissues, which suffer from drawbacks like antigenicity, complex processing, low osteoinductivity, rapid resorption and minimal acceleration of tissue regeneration. This work thus addresses the development of nanofibrous synthetic scaffolds of polycaprolactone (PCL) - a long-term degradation polyester - compounded with hydroxyapatite (HA) and variable concentrations of ZnO as alternative solutions for accelerated bone tissue regeneration in applications requiring mid- and long-term resorption. In vitro cell response of human fetal osteoblasts as well as antibacterial activity against Staphylococcus aureus of PCL:HA:ZnO and PCL:ZnO scaffolds were here evaluated. Furthermore, the effect of ZnO nanostructures at different concentrations on in vitro degradation of PCL electrospun scaffolds was analyzed. The results proved that higher concentrations ZnO may induce early mineralization, as indicated by high alkaline phosphatase activity levels, cell proliferation assays and positive Alizarin-Red-S-stained calcium deposits. Moreover, all PCL:ZnO scaffolds particularly showed antibacterial activity against S. aureus which may be attributed to release of Zn 2+ ions. Additionally, results here obtained showed a variable PCL degradation rate as a function of ZnO concentration. Therefore, this work suggests that our PCL:ZnO scaffolds may be promising and competitive short-, mid- and long-term resorption systems against current clinical solutions for bone tissue regeneration., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Inorganic metal oxides Ag 2 O, CuO and ZnO were examined using SEM, XRD, TGA and ICP spectroscopy to analyze their structures and physical properties in terms of resistance to germs and toxic chemicals. Zone of inhibition testing and the plate-counting method were used in this study to examine the antibacterial activities of the metal oxides against Gram-negative Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa), and Gram-positive Staphylococcus aureus (S. aureus) and Bacillus subtilis (B. subtilis). Furthermore, 2‑chloro‑ethyl ethyl sulfide (2‑CEES) was used to study the degradation efficacy of the metal oxides by the NMR method. The objective of the study was to develop and evaluate metal oxides that are able to protect against chemical and biological warfare agents. Excellent antibacterial and catalytic toxic chemical degradation properties were obtained., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Herein, eco-friendly composite was synthesized by embedding silver (Ag) nanospheres onto aragonitic cuttlefish bone (CB)-stabilized samarium doped zinc oxide (Sm-doped ZnO) nanorods. The operating interaction profile and the photoactive behavior of this nanocomposite were assessed via XRD, FTIR, Raman, TEM, FE-SEM, DLS, DRS and PL techniques. Locality of Sm-doped ZnO and its attaching modes to the cuttlefish bone lamella were highly dominated by embedding Ag NPs that encouraged Zn 2+ Lewis acid sites to electrostatically interact with aragonite carbonates in the channeled porous CB system. Such interacting approach enhanced photoactivity of Sm-doped ZnO by lowering its energy band gap (from 3.26 eV for Sm-doped ZnO/CB to 2.12 eV for Ag@Sm-doped ZnO/CB). Besides, plasmon-induced silver electrons provided Sm-doped ZnO by extra photosensitivity. Ag@Sm-doped ZnO/CB nanocomposite exhibited pronounced photo-activated disinfection efficiencies for Staphylococcus aureus (80%), Pseudomonas aeruginosa (60%), and Schistosoma mansoni cercariae (100%) linked with progressive demolition in cercarial body. Such nanocomposite also possessed exterminating action against Schistosoma mansoni adult worms serving near 100% worm-mortality accompanied by significant disintegration of worm body. These findings were successfully drawn Ag@Sm-doped ZnO/CB as an efficient weapon in the biocides arsenal being even capable of destructing pathogenic bacteria and parasites in dark- and photo- conditions., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Most cancer patients die as a consequence of distant metastases, which are frequently unresponsive to cancer therapy. This study focuses on the anti-tumorigenic and anti-metastatic properties of tangeretin-zinc oxide quantum dots (Tan-ZnO QDs) against the NCI-H358 cell line. Tan-ZnO QDs are pH-sensitive and capitalize on the acidic pH maintained in the tumor microenvironment; therefore, targeted drug delivery is directed specifically to cancer cells, leaving the normal cells less affected. Tan was loaded into synthesized ZnO QDs, and drug loading was analyzed using Fourier transform infrared (FTIR) spectroscopy and ultraviolet-visible (UV-Vis) spectrometry. Crystalline phase and particle size were measured using transmission electron microscopy (TEM) and X-ray diffraction (XRD). Drug release was evaluated in buffered solutions with differing pH for up to 15 h. The results confirmed stable drug release (80%) in an acidic pH. Tan-ZnO QDs induced significant cytotoxicity in NCI-H358 metastatic cells, while not markedly affecting HK-2 human normal cells. Morphology of treated H358 cells analyzed via atomic force microscopy (AFM) showed an increased surface roughness and pores. Further, the number of terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL)-positive cells increased after treatment with Tan-ZnO QDs. DNA fragmentation was also induced after treatment with increasing concentrations of Tan-ZnO QDs in H358 cells. We also confirmed regulation of apoptosis via expression levels of Bax and Bcl-2 proteins; G2/M phase cell cycle arrest was observed. Additionally, cell proliferation and migration drastically decreased, and cell invasion and migration, hallmarks of metastasis, were significantly inhibited in H358 cells. Matrix metalloproteinase (MMP)2 and MMP9, markers of metastasis, as well as vascular endothelial growth factor (VEGF), a marker of angiogenesis, were significantly downregulated upon treatment with Tan-ZnO QDs. In conclusion, our novel formulation destabilized H358 cells by using its acidic tumor microenvironment, thereby regulating cell apoptosis, proliferation, and metastatic properties., (Copyright © 2018 Elsevier B.V. All rights reserved.)

In this study, we report the synthesis, structural and morphological characteristics of zinc oxide (ZnO) nanoparticles using solution combustion synthesis method where lemon juice was used as the fuel. In vitro anti-tubercular activity of the synthesized ZnO nanoparticles and their biocompatibility studies, both in vitro and in vivo were carried out. The synthesized nanoparticles showed inhibition of Mycobacterium tuberculosis H37Ra strain at concentrations as low as 12.5μg/mL. In vitro cytotoxicity study performed with normal mammalian cells (L929, 3T3-L1) showed that ZnO nanoparticles are non-toxic with a Selectivity Index (SI) >10. Cytotoxicity performed on two human cancer cell lines DU-145 and Calu-6 indicated the anti-cancer activity of ZnO nanoparticles at varied concentrations. Results of blood hemolysis indicated the biocompatibility of ZnO nanoparticles. Furthermore, in vivo toxicity studies of ZnO nanoparticles conducted on Swiss albino mice (for 14days as per the OECD 423 guidelines) showed no evident toxicity., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Zinc oxide (ZnO) nanoparticles (NPs) exhibit antibacterial activity against both Gram-positive and Gram-negative bacteria. However, the antimicrobial mechanism of ZnO NPs remains unclear. In this study, we investigated the interactions among ZnO NPs, released chemicals (Zn(2+) and Reactive Oxygen Species, ROS) and Escherichia coli (E. coli) cells. ZnO NPs without contacting with bacterial cells showed strong antibacterial effect. The results of the leakage of intracellular K(+) and integrity of carboxyfluoresce in-filled liposomes showed that ZnO NPs have antimicrobial activity against E. coli by non-specifically disrupting E. coli membranes. Traces of zinc ions (1.25mg/L) and hydrogen peroxide (from 1.25 to 4.5μM/L) were detected in ZnO NPs suspensions, but was insufficient to cause the antibacterial effect. However, the addition of radical scavengers suppressed the bactericidal effect of ZnO coated films against E. coli, potentially implicating ROS generation, especially hydroxyl radicals, in the antibacterial ability of ZnO NPs., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Nanocomposites of zinc oxide loaded on a zeolite (Zeolite/ZnO NCs) were prepared using co-precipitation method. The ratio effect of ZnO wt.% to the Zeolite on the antibacterial activities was investigated. Various techniques were used for the nanocomposite characterization, including UV-vis, FTIR, XRD, EDX, FESEM and TEM. XRD patterns showed that ZnO peak intensity increased while the intensities of Zeolite peaks decreased. TEM images indicated a good distribution of ZnO-NPs onto the Zeolite framework and the cubic structure of the zeolite was maintained. The average particle size of ZnO-nanoparticles loaded on the surface of the Zeolite was in the range of 1-10nm. Moreover, Zeolite/ZnO NCs showed noticeable antibacterial activities against the tested bacteria; Gram- positive and Gram- negative bacteria, under normal light. The efficiency of the antibacterial increased with increasing the wt.% from 3 to 8 of ZnO NPs, and it reached 87% against Escherichia coli E266., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The use of plant extract in the biosynthesis of nanoparticles (NPs) can be an eco-friendly approach and have been suggested as a possible alternative to classic methods namely physical and chemical procedures. In this study, the biosynthesis of zinc oxide (ZnO) NPs by both "conventional heating" (CH) and "microwave irradiation" (MI) methods has been reported. Stable and spherical ZnONPs were produced using zinc nitrate and flesh extract of Rosa canina fruit (rosehip) which was used as a precursor. The flesh extract acts as a reducing and capping agent for generation of ZnONPs. The structural, morphological and colloidal properties of the as-synthesized NPs have been confirmed by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), Fourier transform Infrared (FT-IR) and Dynamic Light Scattering (DLS). In comparison with the CH method, the MI method has some advantages such as significantly short reaction time (within 8min) owing to the high heating rate and thus the accelerated reaction rate. Both methods led to the synthesis of nearly identical NPs with respect to shape and size according to the results of DLS, XRD and SEM techniques. The possible mechanism for synthesis pathway has been proposed based on FT IR results, XRD patterns, potentiometric data and antioxidant activity. In addition, the antibacterial activity of as-prepared ZnONPs was investigated against several bacteria such as Listeria monocytogenes, Escherichia coli, Salmonella typhimurium. Moreover, the efficacy of ZnONPs to treat cancer cell lines were measured by means of cell viability test via MTT assay in which concentrations of 0.05 and 0.1mg/mL of ZnONPs induced a very low toxicity. Thus, the present investigation reveals that ZnONPs have the potential for various medical and industrial applications., (Copyright © 2015 Elsevier B.V. All rights reserved.)

This research concerned the simultaneous polyester surface modification and synthesis of zinc oxide nano-reactors to develop durable photo-bio-active fabric with variable hydrophobicity/hydrophilicity under sunlight. For this purpose, triethanolamine (TEA) was applied as a stabilizer and pH adjusting chemical for the aminolysis of polyester surface and enhancing the surface reactivity along with synthesis and deposition of ZnO nanoparticles on the fabric. Therefore, TEA played a crucial role in providing the alkaline condition for the preparation of zinc oxide nanoparticles and acting as stabilizer controlling the size of the prepared nanoparticles. The stain-photodegradability regarded as self-cleaning efficiency, wettability and weight change under the process was optimized based on zinc acetate and TEA concentrations, using central composite design (CCD). Findings also suggested the potential of the prepared fabric in inhibiting Staphylococcus aureus and Escherichia coli bacteria growth with greater than 99.99% antibacterial efficiency. Besides, the proposed treatment had no detrimental effect on tensile strength and hand feeling of the polyester fabric., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Recent advances in nanotechnology have opened new windows in active food packaging. Nano-sized ZnO is an inexpensive material with potential antimicrobial properties. The aim of the present study is to evaluate the antibacterial effect of low density Polyethylene (LDPE) containing ZnO nanoparticles on Bacillus subtilis and Enterobacter aerogenes. ZnO nanoparticles have been synthesized by facil molten salt method and have been characterized by X-ray diffraction (XRD), and scanning electron microscopy (SEM). Nanocomposite films containing 2 and 4 wt.% ZnO nanoparticles were prepared by melt mixing in a twin-screw extruder. The growth of both microorganisms has decreased in the presence of ZnO containing nanocomposites compared with controls. Nanocomposites with 4 wt.% ZnO nanoparticles had stronger antibacterial effect against both bacteria in comparison with the 2 wt.% ZnO containing nanocomposites. B. subtilis as Gram-positive bacteria were more sensitive to ZnO containing nanocomposite films compared with E. aerogenes as Gram-negative bacteria. There were no significant differences between the migration of Zn ions from 2 and 4 wt.% ZnO containing nanocomposites and the released Zn ions were not significantly increased in both groups after 14 days compared with the first. Regarding the considerable antibacterial effects of ZnO nanoparticles, their application in active food packaging can be a suitable solution for extending the shelf life of food., (Copyright © 2015. Published by Elsevier B.V.)

Zinc oxide (ZnO) is explicitly used in sunscreens and cosmetic products; however, its effect in vivo is toxic in some cases. The UV blocking efficacy of ZnO nanoparticles is lost due to photocatalysis. To isolate a lower toxic species of sunblockers, ZnO nanoparticles were synthesized and coated with chitosan - a natural polymer (ZnO-CTS) and polyethylene glycol (PEG) - a synthetic polymer (ZnO-PEG). Coating with CTS and PEG circumvented the photocatalytic activity, increased the stability and improved the UV absorption efficacy. The effect of ZnO, ZnO-CTS and ZnO-PEG nanoparticles in vivo on zebrafish embryo revealed lower deposition of ZnO-CTS and ZnO-PEG nanoparticles atop the eggs compared to ZnO. The survival of zebrafish embryos was always found to be higher in case of ZnO-CTS with respect to ZnO-treated ones. PEG coating exhibited better UV attenuation, but, in vivo it induced delayed hatching. Thus, one of the reasons for better survival could be attributed to lower aggregation of ZnO-CTS nanoparticles atop eggs thereby facilitating the breathing of embryos., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The present study reports on the influence of partial replacement of MgO by ZnO on the structure, crystallisation behaviour and bioactivity of alkali-free bioactive glass-ceramics (GCs). A series of glass compositions (mol%): 36.07 CaO-(19.24-x) MgO-x ZnO-5.61 P2O5-38.49 SiO2-0.59 CaF2 (x=2-10) have been synthesised by melt-quench technique. The structural changes were investigated by solid-state magic angle spinning nuclear magnetic resonance (MAS-NMR), X-ray diffraction and differential thermal analysis. The sintering and crystallisation behaviours of glass powders were studied by hot-stage microscopy and differential thermal analysis, respectively. All the glass compositions exhibited good densification ability resulting in well sintered and mechanically strong GCs. The crystallisation and mechanical behaviour were studied under non-isothermal heating conditions at 850 °C for 1h. Diopside was the primary crystalline phase in all the GCs followed by fluorapatite and rankinite as secondary phases. Another phase named petedunnite was identified in GCs with ZnO content >4 mol. The proliferation of mesenchymal stem cells (MSCs) and their alkaline phosphatase activity (ALP) on GCs was revealed to be Zn-dose dependent with the highest performance being observed for 4 mol% ZnO., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Self-assembled 3D flower-like yttrium-doped zinc oxide (YZO) microstructures composed of nanorods were prepared by hydrothermal-precipitation, and tested their antibacterial activity. The morphological, structural, and compositional properties of YZO nanoflowers were characterized by various techniques, which confirmed a well-crystallized wurtzite hexagonal phase. X-ray photoelectron spectroscopy (XPS) of YZO nanopowder showed the 3d core level spectra of yttrium (Y), which formed by two components at about 158.2 eV (3d5/2) and 160.4 eV (3d3/2). The antibacterial activity of YZO nanoflowers were investigated using both gram-positive and gram-negative microorganisms. Enhancement in antibacterial activity was observed by the incorporation of yttrium (Y: 2 at.%) of nanorod-based-flowers because of increased surface area. The prepared YZO nanocomposite showed potential as an antibacterial agent with applications in controlling the spread of infections and also the ability of fast antibacterial activity which can hinder the re-emergence of infection., (Copyright © 2015 Elsevier B.V. All rights reserved.)

ZnO nanoparticles are utilized in an ever growing number of products and can, therefore, be readily encountered in our everyday life. Human beings' outermost tissues consist of different epithelia and are, therefore, the most exposed to materials from the environment. In this paper, Caco-2 and Calu-3 cell lines were used, having been previously broadly applied for in vitro modelling of intestinal and respiratory epithelia, respectively. The toxicity of synthesized micro-, submicro- and nanoparticulate ZnO on these epithelia was measured and compared to the efficacy of the same ZnO particles as antibacterial agents. An approximately four-fold excess in antibacterial activity of ZnO nanoparticles over ZnO granulate was observed. The results of this paper reveal a sharp distinction between toxic nanoparticulate ZnO and safe ZnO particles of larger sizes in intestinal and airway in vitro epithelial models. In contrast, ZnO of larger particle sizes had only modestly lower antibacterial activity, which can be compensated for with higher dosing. These results show that nanoparticulate ZnO requires critical in vivo assessment before application., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The antifungal ability of pure and alkaline metal ion (Mg(2+), Ca(2+), Sr(2+) and Ba(2+)) doped ZnO nanoparticles (NPs) prepared by the co-precipitation method was tested against the pathogenic yeast, Candida albicans (C. albicans), and the results showed that the Mg-doped ZnO NPs possessed greater effect than the other alkaline metal ion doped ZnO NPs. The impact of the concentration of Mg doped ZnO sample on the growth of C. albicans was also studied. The Minimal Fungicidal Concentration (MFC) of the Mg doped ZnO NPs was found to be 2000 μg/ml for which the growth of C. albicans was completely inhibited. The ZnO:Mg sample (1.5mg/ml) with various concentrations of histidine reduced the fungicidal effect of the nanoparticles against C. albicans, which was deliberately explained by the role of ROS. The ZnO:Mg sample added with 5mM of histidine scavenged the ample amount of generated ROS effectively. The binding of the NPs with fungi was observed by their FESEM images and their electrostatic attraction is confirmed by the zeta potential measurement., (Copyright © 2015. Published by Elsevier B.V.)

The ever increasing resistance of pathogens towards antibiotics has caused serious health problems in the recent years. It has been shown that by combining modern technologies such as nanotechnology and material science with intrinsic antimicrobial activity of the metals, novel applications for these substances could be identified. According to the reports, metal and metal oxide nanoparticles represent a group of materials which were investigated in respect to their antimicrobial effects. In the present review, we focused on the recent research works concerning antimicrobial activity of metal and metal oxide nanoparticles together with their mechanism of action. Reviewed literature indicated that the particle size was the essential parameter which determined the antimicrobial effectiveness of the metal nanoparticles. Combination therapy with the metal nanoparticles might be one of the possible strategies to overcome the current bacterial resistance to the antibacterial agents. However, further studies should be performed to minimize the toxicity of metal and metal oxide nanoparticles to apply as proper alternatives for antibiotics and disinfectants especially in biomedical applications., (Copyright © 2014 Elsevier B.V. All rights reserved.)

In the present work, the physiological effects of the ZnO nanorods on the Gram positive (Staphylococcus aureus and Bacillus subtilis) and Gram-negative (Escherichia coli and Aerobacter aerogenes) bacterial cells have been studied. The analysis of bacterial growth curves for various concentrations of ZnO nanorods indicates that Gram positive and Gram negative bacterial cells show inhibition at concentrations of ~64 and ~256 μg/mL respectively. The marked difference in susceptibility towards nanorods was also validated by spread plate and disk diffusion methods. In addition, the scanning electron micrographs show a clear damage to the cells via changed morphology of the cells from rod to coccoid etc. The confocal optical microscopy images of these cells also demonstrate the reduction in live cell count in the presence of ZnO nanorods. These, results clearly indicate that the antibacterial activity of ZnO nanorods is higher towards Gram positive bacterium than Gram negative bacterium which indicates that the structure of the cell wall might play a major role in the interaction with nanostructured materials and shows high sensitivity to the particle concentration., (Copyright © 2012 Elsevier B.V. All rights reserved.)