Search

Hybrid polyacrylamide/bacterial cellulose nanofiber clusters (PAM/BC) hydrogels with high strength, toughness and recoverability were synthesized by in situ polymerization of acrylamide monomer in BC nanofiber clusters suspension. The hybrid gels exhibited an extremely large elongation at break of 2200%, and a high fracture stress of 1.35 MPa. Additionally, the original length of hydrogels could be recovered after releasing the tensile force. Compressive results showed that the PAM/BC hybrid gels could reach a strain of about 99% without break, and was able to completely recover its original shape immediately after releasing the compression force. The compressive stress at 99% reached as high as 30 MPa. Nearly no hysteresis in cyclic compressive tests was observed with these hybrid gels. The FT-IR, XRD and TGA analysis showed that hydrogen bonds between the PAM chains and BC nanofiber clusters mainly contributed to the superior mechanical properties of hybrid hydrogels. The cell viability results suggested that PAM/BC hybrid hydrogel was benign for biomedical application. These PAM/BC hydrogels offer a great promise as biomaterials such as bone and cartilage repair materials. [ABSTRACT FROM AUTHOR]

The purpose of this study was to facilely develop amino modified mesoporous silica xerogel synthesized using biomimetic method (B-AMSX) and to investigate its potential ability to be a drug carrier for loading poorly water-soluble drug indomethacin (IMC). For comparison, mesoporous silica xerogel without amino modification (B-MSX) was also synthesized using the same method. The changes of characteristics before and after IMC loading were systemically studied using fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), small angle X-ray scattering (SAXS) and nitrogen adsorption/desorption analysis. The results showed that B-MSX and B-AMSX were spherical nanoparticles with mesoporous structure. Compared with B-MSX, IMC loading capacity of B-AMSX was higher because more drug molecules can be loaded through stronger hydrogen bonding force. DSC and SAXS analysis confirmed the amorphous state of IMC after being loaded into B-MSX and B-AMSX. The in vitro drug release study revealed that B-MSX and B-AMSX improved IMC release significantly, and B-AMSX released IMC a little faster than B-MSX because of larger pore diameter of IMC-AMSX. B-MSX and B-AMSX degraded gradually in dissolution medium evidenced by color reaction and absorbance value, and B-AMSX degraded slower than B-MSX due to amino modification. In conclusion, B-AMSX with superiority of higher loading capacity and enhanced dissolution release can be considered to be a good candidate as drug carrier for IMC. [ABSTRACT FROM AUTHOR]

The present paper innovatively reports bimodal nanoporous silica synthesized using biomimetic method (B-BNS) with synthesized polymer (C 16 - l -serine) as template. Formation mechanism of B-BNS was deeply studied and exploration of its application as carrier of poorly water-soluble drug ibuprofen (IBU) was conducted. The bimodal nanopores and curved mesoscopic channels of B-BNS were achieved due to the dynamic self-assembly of C 16 - l -serine induced by silane coupling agent (3-aminopropyltriethoxysilane, APTES) and silica source (tetraethoxysilane, TEOS). Characterization results confirmed the successful synthesis of B-BNS, and particularly, nitrogen adsorption/desorption measurement demonstrated that B-BNS was meso–meso porous silica material. In application, B-BNS loaded IBU with high drug loading content due to its enlarged nanopores. After being loaded, IBU presented amorphous phase because nanoporous space and curved mesoscopic channels of B-BNS prevented the crystallization of IBU. In vitro release result revealed that B-BNS controlled IBU release with two release phases based on bimodal nanopores and improved dissolution in simulated gastric fluid due to crystalline conversion of IBU. It is convincible that biomimetic method provides novel theory and insight for synthesizing bimodal nanoporous silica, and unique functionalities of B-BNS as drug carrier can undoubtedly promote the application of bimodal nanoporous silica and development of pharmaceutical science. [ABSTRACT FROM AUTHOR]

This work initially illustrated the formation mechanism of chiral mesoporous silica (CMS) in a brand new insight named biomimetic synthesis. Three kinds of biomimetic synthesized CMS (B-CMS, including B-CMS1, B-CMS2 and B-CMS3) were prepared using different pH or stirring rate condition, and their characteristics were tested with transmission electron microscope and small angle X-ray diffraction. The model drug indomethacin was loaded into B-CMS and drug loading content was measured using ultraviolet spectroscopy. The result suggested that pH condition influenced energetics of self-assembly process, mainly packing energetics of the surfactant, while stirring rate was the more dominant factor to determine particle length. In application, indomethacin loading content was measured to be 35.3%, 34.8% and 35.1% for indomethacin loaded B-CMS1, indomethacin loaded B-CMS2 and indomethacin loaded B-CMS3. After loading indomethacin into B-CMS carriers, surface area, pore volume and pore diameter of B-CMS carriers were reduced. B-CMS converted crystalline state of indomethacin to amorphous state, leading to the improved indomethacin dissolution. B-CMS1 controlled drug release without burst-release, while B-CMS2 and B-CMS3 released indomethacin faster than B-CMS1, demonstrating that the particle length, the ordered lever of multiple helixes, the curvature degree of helical channels and pore diameter greatly contributed to the release behavior of indomethacin loaded B-CMS. [ABSTRACT FROM AUTHOR]

Abstract Herein, three kinds of mesoporous silica nanoparticles (BMSs) were biomimetically synthesized by using heterocyclic amino acid derivatives as template and their the basic capacity in being drug carriers that covered structure, wettability, degradation, brain uptake, hemocompatibility and toxicity were systematically evaluated. The results indicated that BMSs were kinds of spherical nanoparticles with good biocompatibility. Their in vitro and in vivo behaviors, including degradation, biodistribution and biocompatibility were mainly governed by the wettability which was closely related to the structure and pore diameter of mesoporous silica nanoparticles. BMSs can degrade completely under simulated physiological environments through a time period of 2–13 weeks. They showed the tendency of brain distribution, and the distribution amount peaked at 4 h post administration. Particularly, Trp-BMS (BMS templated by C 16 - l -tryptophan) with the largest amount of OH groups on the surface exhibited highest wettability, fastest degradation rate and the lowest brain distribution ability. Besides, His-BMS (BMS templated by C 16 - l -histidine) and Pro-BMS (BMS templated by C 16 - l -poline) were silica materials with good biocompatibility. Both in vitro and in vivo studies uncovered no significantly toxicity for BMSs and they were proved to be safe when they circulated into the blood. However, Trp-BMS might induce severe hemolysis and cell cycle arrest due to the high wettability. It is believed that appropriate wettability is required for the in vivo application of nanomaterials and the in vivo evaluation of mesoporous silica nanoparticles will provide useful information for understanding the underlining toxicity of biomaterials and bring new insights on designing efficient drug delivery systems. Graphical abstract Unlabelled Image Highlights • Biomimetically synthesized mesoporous silicas (BMSs) were kinds of nanoparticles with good biocompatibility and low toxicity. • The in vitro and in vivo behaviors of BMSs were mainly governed by their wettability. • The smaller the pore size was, the higher the density of –OH group was, the smaller the contact angle was. • BMSs can degrade completely under simulated physiological environments. • BMSs showed the tendency of brain distribution. [ABSTRACT FROM AUTHOR]

Abstract Despite being currently state-of-the-art to prevent the oxidation of irradiated ultrahigh molecular weight polyethylene (UHMWPE) bearings, vitamin E (VE) poses concerns in the loss of cross-linking efficiency and is limited to be used at very low concentrations. It thus emphasizes the urgent demand for more efficient stabilizers. In this study, oxidation stability of highly cross-linked UHMWPE was demonstrated to be enhanced by tea polyphenols, such as lipid-soluble tea polyphenols (ls PPT), epigallocatechin gallate (EGCG), and lipid-soluble epigallocatechin gallate (ls EGCG). These antioxidants were blended with UHMWPE granules and consolidated by compression molding prior to E-beam irradiation. The presence of tea polyphenols substantially prolonged oxidation induction time of the irradiated UHMWPE before and after accelerated aging. Especially, ls EGCG was significantly superior to VE in terms of stabilizing capacity. Explained by the hydrogen donation mechanism, tea polyphenols with multiple phenolic hydroxyls could scavenge more radiation-induced free radicals than VE with only one phenolic hydroxyl, which was verified by the electron spin resonance spectra. Intriguingly, tea polyphenols showed less inhibitive effect on the cross-link density of irradiated UHMWPE than VE. Besides, there is no significant difference in crystallinity, mechanical performance as well as in vitro biocompatibility between the irradiated UHMWPE stabilized by tea polyphenols and VE. These findings highlight tea polyphenols, especially ls EGCG, are promising alternatives to extend the life span of UHMWPE implants. Highlights • Tea polyphenols can capture more macroalkyl radicals triggered by irradiation than commercial VE. • Tea polyphenols significantly enhance oxidation resistance of irradiated UHMWPE with less inhibition on cross-linking. • Tea polyphenol-stabilized UHMWPE is promising candidate to extend the longevity of UHMWPE bearings. [ABSTRACT FROM AUTHOR]

Abstract The present paper reported a biomimetic synthesis of mesoporous silicas (BMSs) at room temperature by using synthesized polymers (C 16 - l -His, C 16 - l -Pro and C 16 - l -Trp) which derived from amino acid with ring structures as template under basic condition via co-structural-directing-agent method. The formation mechanism of BMSs and effect of initial synthesis conditions (such as surfactant structure, pH and co-solvents) on morphology and structure of BMSs were systematically studied. Synthesized BMSs were characterized by transmission electron microscope (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and nitrogen adsorption/desorption isotherms. The results showed that the surfactant structure was the dominant factor to direct the final mesostructure of BMSs, since the structure of surfactant affected the structure and size of clusters. Meanwhile the generation of BMSs required very rigorous alkaline condition which controlled the ionization degree of the surfactant and thus contributing to adequate stacking energy. Higher pH resulted in construction of channels with higher curvature. The presence of ethanol was found to facilitate the formation of BMSs with larger particle size. In application, aspirin can be loaded into BMSs with high efficiency, and the drug crystalline state of aspirin transformed from crystalline state to amorphous state during this process, which undoubtedly lead to the improvement of drug dissolution from 72.8% to 100% within 90 min. It is convincible that the biomimetic method presented here provided novel insight on precisely control of mesoporous silica and undoubtedly promoted the application of mesoporous silica materials. Graphical abstract Unlabelled Image Highlights • Heterocyclic amino acid derivatives templated mesoporous silicas were synthesized using biomimetic method. • Curved channels were obtained due to dynamic self-assembly of C 16 -L-aminoacid. • Surfactant structure, pH and co-solvents influenced the final morphology and structure of mesoporous silicas. • Biomimetic synthesized mesoporous silicas possessed excellent drug loading capacity and significantly improved the drug release rate in vitro. [ABSTRACT FROM AUTHOR]

Degradation properties play a vital role in long-term in situ drug delivery systems. In vitro degradation behaviours of organogels were investigated via two approaches in this study: a weight loss method and a drug release method. Through the two methods, parameters that affect the degradation of organogels (such as gelator type, gelator concentration and oil type) were systematically tested under a lipase solution to better mimic in vivo circumstances. The gelator structure had the greatest influence on degradation behaviour. By regulating the parameters that influence degradation, the drug release method can properly predict in vivo degradation. Our investigation of organogel degradation provides a theoretical basis for in vivo organogel use as a biodegradable in situ implant for drug delivery. [ABSTRACT FROM AUTHOR]

In the present work, control-release microcapsule of famotidine (FMT) loaded biomimetic synthesized mesoporous silica nanoparticles (B-MSNs) was developed, and controlled release effect and stomach adhesion of this formulation in vitro were mainly investigated. B-MSN was previously synthesized and it was amorphous mesoporous nanoparticles with helical channels. Cytotoxicity of B-MSN was studied using human breast cancer cells (MCF-7) and the result indicated that cytotoxicity of B-MSN can be neglected. After loading FMT into B-MSN, specific surface area, pore volume and pore diameter of B-MSN were obviously reduced. In vitro dissolution test showed that B-MSN had the ability to slow down FMT release for 15 min. In order to prolong controlled release effect and remained the advantage of B-MSN (improve drug stability due to its rigid silica framework), the combined application of control-release microcapsule (using cellulose and hydroxypropyl methylcellulose K15M as excipients) with B-MSN was designed. It was obvious that newly designed formulation significantly controlled FMT release with Fickian diffusion mechanism and showed enhanced stomach adhesion in vitro, which has significant value in widening the application of B-MSN in formulation design. [ABSTRACT FROM AUTHOR]

In this study, twisted rod-like chiral mesoporous silicas (CMSs) with discriminating chiral characteristics (D/L) were designed and biomimetic synthesized by using L- and d -alanine derivatives as templates, and employed as poorly water-soluble chiral drug ibuprofen (IBU) carriers. The morphology and mesoscopic characteristics of CMSs were determined by transmission electron microscope (TEM) and small-angle X-ray scattering (SAXS). Meanwhile, the physicochemical properties of CMSs before and after drug loading were systematically characterized by infrared spectroscopy (IR), nitrogen adsorption, X-ray diffraction (XRD), differential scanning calorimetry (DSC) and induced circular dichroism (ICD). The results suggested that, the CMSs exhibited local chiral characteristics, which were successfully endowed by the alanine-derivative surfactants templates with a reversal of chirality. The crystalline state of IBU was effectively converted to amorphous state after being incorporated into CMSs, and the drug delivery systems shared the chiral characteristic of carriers. Besides, in vitro drug release experiments were respectively performed in simulated gastric fluid (SGF, pH 1) and simulated intestinal fluid (SIF, pH 6.8) medium, and the results demonstrated that both l -CMS and d -CMS could improve the dissolution of IBU in SGF medium, which could be explained by the amorphization of IBU. Particularly, due to the different pore geometry of these two materials, CMSs with different chirality (D/L) could be applied as carriers to accomplish drug release differentiation. Unlabelled Image • Mesoporous silicas (CMSs) with chiral structures (D/L) were synthesized using biomimetic method. • CMSs could be used to accomplish drug release differentiation. • The solubility of ibuprofen was significantly improved after being loaded into CMSs. • The drug delivery systems shared the chiral characteristic of carriers. [ABSTRACT FROM AUTHOR]