Search

Composites based on green high-density polyethylene (G-HDPE) and hydroxyapatite (HA) compatibilized with maleic anhydride grafted high-density polyethylene (HDPE-g-MAH) were developed in this work. The main objective was to evaluate the effects of HA and HDPE-g-MAH contents on the mechanical and thermal properties and hydrolytic degradation of composites through design of experiments and statistical analysis, as well as to evaluate the hemolytic stability. Hydroxyapatite acts as a reinforcing agent for the G-HDPE matrix while the HDPE-g-MAH acts as a compatibilizing agent, improving the dispersion of the HA particles in the polymer matrix and thus increasing the mechanical properties. The crystallization temperature and the degree of crystallinity of the polymer matrix were increased with the addition of HA, suggesting the filler acts as a heterogeneous nucleating agent. Hemolysis tests performed on a composite sample with best mechanical performance did not indicate significant hydrolytic degradation, which suggests this composite is a promising material to be used in bone tissue engineering, for application in implants and bone grafts.

Polymeric syntactic foams are composites made from the mixture of Hollow Glass Microspheres (HGM) and polymer matrices. One of their main characteristics is their low density and the production of these composites using a matrix derived from renewable sources potentiates their development without neglecting sustainability. In this paper , the properties of High Density Polyethylene (HDPE)/HGM syntactic foams containing 1% and 5% w/w HGM and 5% w/w of a compatibilizer are assessed. The composites were prepared by two processing routes: single screw extruder and twin screw extruder. The morphology and mechanical properties (tensile and impact) of the syntactic foams thus manufactured were ascertained. Morphological analysis indicated that matrix/filler adhesion was poor for all samples and that the best HGM dispersions were obtained in twin screw extruded samples. Mechanical properties were affected by the processing route adopted and by the content of hollow glass microspheres added. Elastic modulus, tensile strength and strain were reduced by 20, 10 and 23%, respectively, in systems processed in a twin screw extruder. Impact strength was the exception, with an increase of more than 300%. Higher contents of hollow glass microspheres led to reductions in mechanical strength of the syntactic foams, varying from 5% for the elastic modulus to 50% for strain.

Polyethylene (PE) is a polymer that has a low adhesion property, which is related to its low surface energy. However, the plasma treatment aims the modification of the surface properties without affecting the polymer structure. In this sense, the objective of this work was to prepare biocomposite films via flat extrusion with Green PE matrix and Expanded Vermiculite Clay (VMT), contents of 1, 3 and 6%. The films were treated by plasma in two different ways: Oxygen (O2) atmosphere (Condition 1); and Argon/Hydrogen (Ar/H2) atmosphere followed by a plasma treatment under O2 atmosphere (Condition 2). The results of the contact angle measurements indicated that the incorporation of VMT and the conditions used for plasma treatment increased the films wettability due to the hydrophilic character of VMT and also as a consequence of the plasma. In contrast, the XRD diffractograms indicated that there were no significant changes in the films structure.