Search

Relaxation time and frequency spectra are not directly available by measurement. To determine them, an ill-posed inverse problem must be solved based on relaxation stress or oscillatory shear relaxation data. Therefore, the quality of spectra models has only been assessed indirectly by examining the fit of the experiment data to the relaxation modulus or dynamic moduli models. As the measures of data fitting, the mean sum of the moduli square errors were usually used, the minimization of which was an essential step of the identification algorithms. The aim of this paper was to determine a relaxation spectrum model that best approximates the real unknown spectrum in a direct manner. It was assumed that discrete-time noise-corrupted measurements of a relaxation modulus obtained in the stress relaxation experiment are available for identification. A modified relaxation frequency spectrum was defined as a quotient of the real relaxation spectrum and relaxation frequency and expanded into a series of linearly independent exponential functions that are known to constitute a basis of the space of square-integrable functions. The spectrum model, given by a finite series of these basis functions, was assumed. An integral-square error between the real unknown modified spectrum and the spectrum model was taken as a measure of the model quality. This index was proved to be expressed in terms of the measurable relaxation modulus at uniquely defined sampling instants. Next, an empirical identification index was introduced in which the values of the real relaxation modulus are replaced by their noisy measurements. The identification consists of determining the spectrum model that minimizes this empirical index. Tikhonov regularization was applied to guarantee model smoothness and noise robustness. A simple analytical formula was derived to calculate the optimal model parameters and expressed in terms of the singular value decomposition. A complete identification algorithm was developed. The analysis of the model smoothness and model accuracy for noisy measurements was carried out. The equivalence of the direct identification of the relaxation frequency and time spectra has been demonstrated when the time spectrum is modeled by a series of functions given by the product of the relaxation frequency and its exponential function. The direct identification concept can be applied to both viscoelastic fluids and solids; however, some limitations to its applicability have been pointed out. Numerical studies have shown that the proposed identification algorithm can be successfully used to identify Gaussian-like and Kohlrausch–Williams–Watt relaxation spectra. The applicability of this approach to determining other commonly used classes of relaxation spectra was also examined. [ABSTRACT FROM AUTHOR]

Considerable development has been observed in the area of applying fractional-order rheological models to describe the viscoelastic properties of miscellaneous materials in the last few decades together with the increasingly stronger adoption of fractional calculus. The fractional Maxwell model is the best-known non-integer-order rheological model. A weighted least-square approximation problem of the relaxation modulus by the fractional Maxwell model is considered when only the time measurements of the relaxation modulus corrupted by additive noises are accessible for identification. This study was dedicated to the determination of the model, optimal in the sense of the integral square weighted model quality index, which does not depend on the particular sampling points applied in the stress relaxation experiment. It is proved that even when the real description of the material relaxation modulus is entirely unknown, the optimal fractional Maxwell model parameters can be recovered from the relaxation modulus measurements recorded for sampling time points selected randomly according to respective randomization. The identified model is a strongly consistent estimate of the desired optimal model. The exponential convergence rate is demonstrated both by the stochastic convergence analysis and by the numerical studies. A simple scheme for the optimal model identification is given. Numerical studies are presented for the materials described by the short relaxation times of the unimodal Gauss-like relaxation spectrum and the long relaxation times of the Baumgaertel, Schausberger and Winter spectrum. These studies have shown that the appropriate randomization introduced in the selection of sampling points guarantees that the sequence of the optimal fractional Maxwell model parameters asymptotically converge to parameters independent of these sampling points. The robustness of the identified model to the measurement disturbances was demonstrated by analytical analysis and numerical studies. [ABSTRACT FROM AUTHOR]

The viscoelastic relaxation spectrum is vital for constitutive models and for insight into the mechanical properties of materials, since, from the relaxation spectrum, other material functions used to describe rheological properties can be uniquely determined. The spectrum is not directly accessible via measurement and must be recovered from relaxation stress or oscillatory shear data. This paper deals with the problem of the recovery of the relaxation time spectrum of linear viscoelastic material from discrete-time noise-corrupted measurements of a relaxation modulus obtained in the stress relaxation test. A two-level identification scheme is proposed. In the lower level, the regularized least-square identification combined with generalized cross-validation is used to find the optimal model with an arbitrary time-scale factor. Next, in the upper level, the optimal time-scale factor is determined to provide the best fit of the relaxation modulus to experiment data. The relaxation time spectrum is approximated by a finite series of power–exponential basis functions. The related model of the relaxation modulus is proved to be given by compact analytical formulas as the products of power of time and the modified Bessel functions of the second kind. The proposed approach merges the technique of an expansion of a function into a series of independent basis functions with the least-squares regularized identification and the optimal choice of the time-scale factor. Optimality conditions, approximation error, convergence, noise robustness and model smoothness are studied analytically. Applicability ranges are numerically examined. These studies have proved that using a developed model and algorithm, it is possible to determine the relaxation spectrum model for a wide class of viscoelastic materials. The model is smoothed and noise robust; small model errors are obtained for the optimal time-scale factors. The complete scheme of the hierarchical computations is outlined, which can be easily implemented in available computing environments. [ABSTRACT FROM AUTHOR]