Search

During the service period, asphalt materials are affected by various natural factors, including heat, ultraviolet light, oxygen and moisture, etc., resulting in the reduction of pavement performance, the increase of pavement distress and shortening of service life. This study aims to investigate the aging performance of asphalt under multiple aging conditions of heat, UV and aqueous solution. Thermal-oxygen aging, UV aging and hydrostatic erosion tests were carried out sequentially on asphalt. The rheological properties, chemical structure and element composition of asphalt were characterized before and after aging, and the effect mechanism of multiple conditions was discussed. The results show that the multiple conditions of heat and UV can increase the rutting resistance and weaken the cracking resistance of asphalt. However, the effect degree of UV decreases gradually with the deepening of aging degree. Additionally, the effect of water on the physicochemical properties is less than that of UV; however, water can increase the sensitivity of physicochemical properties to UV. In summary, this study explored the short-term cycling effect of heat, light and water on asphalt and provided an idea for simulation test of asphalt under multiple aging condition. [ABSTRACT FROM AUTHOR]

When a fire occurs in a tunnel, the instantaneous high temperature and smoke cause great danger to people. Therefore, the asphalt pavement material in the tunnel must have sufficient fire resistance. In this study, the effects of aluminum hydroxide and layered double hydroxide on the fire resistance of styrene-butadiene-styrene (SBS) polymer-modified asphalt was investigated. The fire resistance of the asphalt was evaluated by using a limiting oxygen index (LOI). The impact of aluminum hydroxide (ATH), layered double hydroxide (LDHs), and mixed flame retardant (MFR) on LOI was studied. The synergistic fire resistance mechanism of ATH and LDHs in asphalt binder was analyzed by using an integrated thermal analyzer‒mass spectrometry combined system (TG-DSC-MS) and Fourier transform infrared spectrometer (FTIR). The experimental results indicated that the main active temperature range of these flame retardants was 221–483 °C. The main components of smoke were methane, hydroxyl, water, carbon monoxide, aldehyde, carbon dioxide, etc. The addition of flame retardants could inhibit the production of methane, carbon monoxide, and aldehyde. Moreover, due to the good synergistic effects of ATH and LDHs, 20 wt % MFR had the best fire resistance. [ABSTRACT FROM AUTHOR]

The properties of asphalt pavement are damaged under the effects of moisture. The pH value and salt concentration of water are the key factors that affect the chemical and rheological properties of asphalt during moisture damage. Four kinds of water solutions, including distilled water, an acidic solution, alkaline solution and saline solution were used to investigate the effects of aqueous solute compositions on the chemical and rheological properties of asphalt. Thin-layer chromatography with flame ionization detection (TLC-FID), Fourier transform infrared (FTIR) spectroscopy and dynamic shear rheometer (DSR) were applied to investigate the components, chemistry and rheology characteristics of asphalt specimens before and after water solute exposure. The experimental results show that moisture damage of asphalt is not only associated with an oxidation process between asphalt with oxygen, but it is also highly dependent on some compounds of asphalt dissolving and being removed in the water solutions. In detail, after immersion in water solute, the fraction of saturates, aromatics and resins in asphalt binders decreased, while asphaltenes increased; an increase in the carbonyl and sulphoxide indices, and a decrease in the butadiene index were also found from the FTIR analyzer test. The rheological properties of asphalt are sensitive to water solute immersing. The addition of aqueous solutes causes more serious moisture damage on asphalt binders, with the pH11 solution presenting as the most destructive during water solute exposure. [ABSTRACT FROM AUTHOR]

Diatomite is an inorganic natural resource in large reserve. This study consists of two phases to evaluate the effects of diatomite on asphalt mixtures. In the first phase, we characterized the diatomite in terms of mineralogical properties, chemical compositions, particle size distribution, mesoporous distribution, morphology, and IR spectra. In the second phase, road performances, referring to the permanent deformation, crack, fatigue, and moisture resistance, of asphalt mixtures with diatomite were investigated. The characterization of diatomite exhibits that it is a porous material with high SiO2 content and large specific surface area. It contributes to asphalt absorption and therefore leads to bonding enhancement between asphalt and aggregate. However, physical absorption instead of chemical reaction occurs according to the results of FTIR. The resistance of asphalt mixtures with diatomite to permanent deformation and moisture are superior to those of the control mixtures. But, the addition of diatomite does not help to improve the crack and fatigue resistance of asphalt mixture. [ABSTRACT FROM AUTHOR]