Search

Flammability and smoke generation of glass-fiber-reinforced polyester laminates (GFRPs) modified with L-arginine phosphate (ArgPA) have been investigated. The composition, structure, and thermal degradation processes of ArgPA were assessed by the elemental, FTIR, and thermogravimetric analyses. Flammability and smoke emission of GFRPs varying by different amounts (5–15 wt.%) of bio-based flame retardant (FR) prepared via hand lay-up method were assessed in terms of the limiting oxygen index (LOI) and smoke density tests. It was observed that the addition of ArgPA results in the formation of a charred layer with visible bubbles. The LOI of GFRP with 15 wt.% of ArgPA increased from 20.73 V/V % (non-modified GFRP) to 24.55 V/V %, and the material classification was improved from combustible to self-extinguishing. FRs usually increase the specific optical density of smoke, which was also observed for ArgPA-modified GFRPs. However, the specific optical density of smoke at the 4th minute of measurement (Ds(4)) obtained for ArgPA-modified GFRPs was lower than for GFRPs modified with commercially used APP. TG/FTIR studies of resin modified with ArgPA revealed the presence of phosphorus compounds and non-combustible gases in the decomposition products. Results demonstrate the potential of ArgPA as an effective, bio-based FR for the enhancement of GFRP fire safety. [ABSTRACT FROM AUTHOR]

Lightweight concrete exhibits many advantages over traditional concrete such as lower density and thermal conductivity and an easier, cheaper, less energy-consuming manufacturing process. In order to extend its applications, there is a need to study its behavior in fire situations. Due to that, the aim of this study was to assess the fire resistance of foam concrete, depending on its thickness and the foaming process applied. Fire resistance was assessed according to EN 1363-1. The results indicate the usefulness of foam concrete in terms of isolating fire temperatures for discontinuous partition filling that are consequently a real alternative to dedicated solutions in the field of passive fire protection. The density of foam concrete was shown to have a large effect on the ability to insulate fire temperatures with a standard material preparation process. It was also noted that changing the method to continuous foam feeding may result in the achievement of similar values while maintaining foam concrete low density. [ABSTRACT FROM AUTHOR]

For many years, efforts have been made to reduce the flammability of unsaturated polyester resins (UPRs), which are often used in the rail, shipbuilding, and construction industries. Without modification, they often fail to meet fire safety standards. Despite a rich history of flame retardants (FRs) applied to UPRs, researchers seek new solutions that will provide lower flammability and smoke density, as well as attaining a lower environmental impact from the composites. The objective of the study is to highlight the most important recent research on promising nano FRs in order to promote their further development. Mechanisms of action of several groups of nano FRs, such as clay-based, carbon-based, transition metal compounds, layered double hydroxides, polyhedral oligomeric silsesquioxanes, and others, including bio-based, have been studied. Particular emphasis has been laid on nano FRs applied to UPRs, and their influences on thermal stability, flammability, and mechanical properties. Moreover, the environmental impact and toxicity of nano FRs have been discussed. Results have proved that nano FRs applied at low loadings may significantly improve thermal stability, with a simultaneous increase or only a slight decrease in mechanical properties. However, attention on related environmental issues has highlighted the necessity of carefully selecting novel nano FRs. [ABSTRACT FROM AUTHOR]

This paper presents a review of flame retardants used for glass/polyester laminates. It concerns flame retardants withdrawn from use such as compounds containing halogen atoms and flame retardants currently used in the industry, such as inorganic hydroxides, phosphorus and nitrogen-containing compounds, antimony, and boron compounds, as well as tin–zinc compounds. Attention is also drawn to the use of nanoclays and the production of nanocomposites, intumescent flame retardant systems, and mats, as well as polyhedral oligomeric silsesquioxanes. The paper discusses the action mechanism of particular flame retardants and presents their advantages and disadvantages. [ABSTRACT FROM AUTHOR]