Search

In this work, a new and effective treatment on bamboo fiber (BF) is presented, and its effect on the interfacial bonding properties of the BF/resin matrix was studied. The interfacial functionary mechanism of rare earth solution (RES) modification to improve the interfacial bonding properties between BF and the resin matrix was analyzed. The hardness and elastic modulus of the interfacial zone between BF and the resin matrix were measured using nanoindentation. Fourier-transform infrared spectroscopy (FT-IR) was used to analyze the change in the surface functional group of BF in the modification process. The surface chemical composition of BF before and after the modification was characterized by X-ray photoelectron spectroscopy (XPS). The results show that the RES modification significantly increases the hardness and elastic modulus of BF and its interfacial zone with the resin matrix. The hydroxyl concentration on the surface of RES-treated BF decreases, which reduces the hydrophilicity of BF. Rare earth ions react with oxygen in the hydroxyl group at the C2 position in the glucosylic ring of cellulose. The RES-modified BF bonds with the resin matrix to form a rare earth complex, which significantly enhances the interfacial adhesion between BF and the resin matrix. [ABSTRACT FROM AUTHOR]

The single-layer molybdenum disulfide (SLMoS2) nanosheets have been experimentally discovered to exist in two different polymorphs, which exhibit different electrical properties, metallic or semiconducting. Herein, molecular dynamics (MD) simulations of nanoindentation and uniaxial compression were conducted to investigate the phase transition of SLMoS2 nanosheets. Typical load–deflection curves, stress–strain curves, and local atomic structures were obtained. The loading force decreases sharply and then increases again at a critical deflection under the nanoindentation, which is inferred to the phase transition. In addition to the layer thickness, some related bond lengths and bond angles were also found to suddenly change as the phase transition occurs. A bell-like hollow, so-called residual deformation, was found to form, mainly due to the lattice distortion around the waist of the bell. The effect of indenter size on the residual hollow was also analyzed. Under the uniaxial compression along the armchair direction, a different phase transition, a uniformly quadrilateral structure, was observed when the strain is greater than 27.7%. The quadrilateral structure was found to be stable and exhibit metallic conductivity in view of the first-principle calculation. [ABSTRACT FROM AUTHOR]