Search

The rapid technological progress of large-scale CNC (computer numerical control) systems for Screw Extrusion Additive Manufacturing (SEAM) has made the overprinting of composite laminates a much-discussed topic. It offers the potential to efficiently produce functionalised high-performance structures. However, bonding the 3D-printed structure to the laminate has proven to be a critical point. In particular, the bonding mechanisms must be precisely understood and controlled to ensure in situ bonding. This work investigates the applicability of healing models from 3D printing to the overprinting of thermoplastic laminates using semi-crystalline, high-performance material like PEEK (polyether ether ketone). For this purpose, a simulation methodology for predicting the bonding behaviour is developed and tested using experimental data from a previous study. The simulation consists of a transient heat analysis and a diffusion healing model. Using this model, a qualitative prediction of the bond strength could be made by considering the influence of wetting. It was shown that the thermal history of the interface and, in particular, the tolerance of the deposition of the first layer are decisive for in situ bonding. The results show basic requirements for future process and component developments and should further advance the maturation of overprinting. [ABSTRACT FROM AUTHOR]

As a result of continuing scientific and technological progress, electromagnetic waves have become increasingly pervasive across a variety of domains, particularly within the microwave frequency range. These waves have found extensive applications in wireless communications, high-frequency electronic circuits, and several related fields. As a result, absorptive materials have become indispensable for dual-use applications across both the military and civilian domains because of their exceptional electromagnetic wave absorption properties. This paper, beginning with the operating mechanisms of absorptive materials, aims to provide an overview of the strategies that have been used to enhance the absorption performance of iron-based magnetic absorbers (IBMAs) and discuss the current research status of absorptive material components. The fabrication of a ferromagnetic absorber in terms of morphology, heterointerface coupling, and macrostructural enhancements and the effect of powder characteristics on their electromagnetic properties are discussed. Additionally, the application of IBMAs in elastomers is summarized. Finally, this paper summarizes the limitations of existing ferromagnetic absorber materials and offers a perspective on their potential future developments. The objective of the ongoing research is to fabricate absorptive components that have thin profiles, lightweight construction, wide absorption frequency ranges, and strong absorption capabilities. [ABSTRACT FROM AUTHOR]

Continuous technological progress places significant demands on the materials used in increasingly modern devices. An important parameter is often the long-term thermal resistance of the material. The use of heat-resistant polymer materials worked well in technologically advanced products. An economically justified direction in searching for new materials is the area of polymer nanocomposite materials. It is necessary to appropriately select both the polymer matrix and the nanofillers best able to demonstrate the synergistic effect. A promising area of exploration for such nanocomposites is the use of organosilicon polymers, which results from the unique properties of these polymers related to their structure. This review presents the results of the analysis of the most important literature reports regarding organosilicon polymer nanocomposites with increased thermal resistance. Particular attention was paid to modification methods of silicone nanocomposites, focusing on increasing their thermal resistance related to the modification of siloxane molecular structure and by making nanocomposites using inorganic additives and carbon nanomaterials. Attention was also paid to such important issues as the influence of the dispersion of additives in the polymer matrix on the thermal resistance of silicone nanocomposites and the possibility of modifying the polymer matrix and permanently introducing nanofillers thanks to the presence of various reactive groups. The thermal stability mechanism of these nanocomposites was also analysed. [ABSTRACT FROM AUTHOR]

In recent years, high-ductility concrete (HDC) has gradually become popular in the construction industry because of its excellent ductility and crack resistance. Concrete itself is a kind of building material with poor tensile properties, and it is necessary to add a large number of steel bars to improve its tensile properties, which increases the construction cost of buildings. However, most of the research studies on high-ductility concrete are scattered. In this paper, the basic mechanical properties of high-ductility concrete and the effects of dry and wet cycles, freeze–thaw cycles, and salt erosion on the durability of high-ductility concrete are obtained by comprehensive analysis. The results show that the tensile properties of HDC can be significantly improved by adding appropriate fiber. When the volume fraction of steel fiber is 2.0%, the splitting tensile strength of concrete is increased by 98.3%. The crack width threshold of concrete chloride erosion is 55–80 μm, and when the crack width threshold is exceeded, the diffusion of CL-1 will be accelerated, and the HDC can control the crack within the threshold, thereby improving the durability of the concrete. Finally, the current research status of high-ductility concrete is analyzed, and the future development of high-ductility concrete is proposed. [ABSTRACT FROM AUTHOR]

The exploration of Hot Dry Rock (HDR) geothermal energy is essential to fulfill the energy demands of the increasing population. Investigating the physical and mechanical properties of heated rock under different cooling methods has significant implications for the exploitation of HDR. In this study, ultrasonic testing, uniaxial strength compression experiments, Brazilian splitting tests, nuclear magnetic resonance (NMR), and scanning electron microscope (SEM) were conducted on heated granite after different cooling methods, including cooling in air, cooling in water, cooling in liquid nitrogen, and cycle cooling in liquid nitrogen. The results demonstrated that the density, P-wave velocity (Vp), uniaxial compressive strength (UCS), tensile strength (σt), and elastic modulus (E) of heated granite tend to decrease as the cooling rate increases. Notably, heated granite subjected to cyclic liquid nitrogen cooling exhibits a more pronounced decline in physical and mechanical properties and a higher degree of damage. Furthermore, the cooling treatments also lead to an increase in rock pore size and porosity. At a faster cooling rate, the fracture surfaces of the granite transition from smooth to rough, suggesting enhanced fracture propagation and complexity. These findings provide critical theoretical insights into optimizing stimulation performance strategies for HDR exploitation. [ABSTRACT FROM AUTHOR]

In the last twenty years, nanofabrication progress has allowed for the emergence of a new photodetector family, generally called low-dimensional solids (LDSs), among which the most important are two-dimensional (2D) materials, perovskites, and nanowires/quantum dots. They operate in a wide wavelength range from ultraviolet to far-infrared. Current research indicates remarkable advances in increasing the performance of this new generation of photodetectors. The published performance at room temperature is even better than reported for typical photodetectors. Several articles demonstrate detectivity outperforming physical boundaries driven by background radiation and signal fluctuations. This study attempts to explain these peculiarities. In order to achieve this goal, we first clarify the fundamental differences in the photoelectric effects of the new generation of photodetectors compared to the standard designs dominating the commercial market. Photodetectors made of 2D transition metal dichalcogenides (TMDs), quantum dots, topological insulators, and perovskites are mainly considered. Their performance is compared with the fundamental limits estimated by the signal fluctuation limit (in the ultraviolet region) and the background radiation limit (in the infrared region). In the latter case, Law 19 dedicated to HgCdTe photodiodes is used as a standard reference benchmark. The causes for the performance overestimate of the different types of LDS detectors are also explained. Finally, an attempt is made to determine their place in the global market in the long term. [ABSTRACT FROM AUTHOR]

With the booming of renewable clean energies towards reducing carbon emission, demands for lithium-ion batteries (LIBs) in applications to transportation vehicles and power stations are increasing exponentially. As a consequence, great pressures have been posed on the technological development and production of valuable elements key to LIBs, in addition to concerns about depletion of natural resources, environmental impacts, and management of waste batteries. In this paper, we compile recent information on lithium, nickel, and cobalt, the three most crucial elements utilized in LIBs, in terms of demands, current identified terrestrial resources, extraction technologies from primary natural resources and waste. Most nickel and cobalt are currently produced from high-grade sulfide ores via a pyrometallurgical approach. Increased demands have stimulated production of Ni and Co from low-grade laterites, which is commonly performed through the hydrometallurgical process. Most lithium exists in brines and is extracted via evaporation–precipitation in common industrial practice. It is noteworthy that at present, the pyrometallurgical process is energy-intensive and polluting in terms of gas emissions. Hydrometallurgical processes utilize large amounts of alkaline or acidic media in combination with reducing agents, generating hazardous waste streams. Traditional evaporation–precipitation consumes time, water, and land. Extraction of these elements from deep seas and recycling from waste are emerging as technologies. Advanced energy-saving and environmentally friendly processes are under extensive research and development and are crucial in the process of renewable clean energy implementation. [ABSTRACT FROM AUTHOR]

Keratin waste, including keratin powder, is a significant byproduct of the poultry processing and meat industries. It is a major contributor to waste management problems due to its volume and the environmental pollutants that it can produce. The disposal of keratin waste is challenging due to the potential for odors and pathogens to enter the soil and water. The aim of this work is to present the possibility of using waste materials in accordance with the principles of upcycling and producing fully valuable products. In this research, the author focuses on the production and research of textile multilayer laminates using keratin flour that had been previously considered waste material. New textile composites should be characterized by increased thermal insulation properties with constant comfort in use. This research determines the physiological comfort interpreted as the state of the human–laminate system, which maintains the conditions of comfort in human perception, i.e., constant temperature and humidity of the body under changing conditions of a relative humidity environment. [ABSTRACT FROM AUTHOR]

Three-dimensional printing technology in construction is a rapidly growing field that offers innovative opportunities for design and construction execution. A key component of this process is the automated production of high-performance construction mixtures that meet specific requirements for strength, fluidity, and setting speed. This overview article outlines the history and development of 3D printing technology in the construction industry, describes various printing technologies, and discusses the properties and requirements for construction mixes. Special attention is given to automated systems for batching and mixing ingredients, which increase the precision and efficiency of production. The different types of construction mixes used in 3D printing and the main technical and operational challenges associated with their application are also presented. The article's conclusions highlight the potential of this technology to revolutionize the construction industry by improving efficiency and reducing costs and project lead times. [ABSTRACT FROM AUTHOR]

Bismuth-based compounds have been regarded as a kind of promising material due to their narrow bandgap, high carrier mobility, low toxicity, and strong oxidation ability, showing potential applications in the field of photoelectrochemical (PEC) activities. They can be applied in sustainable energy production, seawater desalination and treatment, optical detection and communication, and other fields. As a member of the broader family of bismuth-based materials, β-Bi2O3 exhibits significant advantages for applications in engineering, including high photoelectric response, stability in harsh environments, and excellent corrosion resistance. This paper presents the synthesis of β-Bi2O3 thin films utilizing the mist chemical vapor deposition (CVD) method at the optimal temperature of 400 °C. Based on the β-Bi2O3 thin film synthesized at optimal temperature, a PEC-type photodetector was constructed with the highest responsivity R of 2.84 mA/W and detectivity D of 6.01 × 1010 Jones, respectively. The photodetection performance was investigated from various points like illumination light wavelength, power density, and long-term stability. This study would broaden the horizontal and practical applications of β-Bi2O3. [ABSTRACT FROM AUTHOR]

Bio-inspired hydrogel robots have become promising due to their advantage of the interaction safety and comfort between robots and humans, while current hydrogel robots mainly focus on underwater movement due to the hydration–dehydration process of thermo-responsive hydrogels, which greatly limits their practical applications. To expand the motion of the thermo-responsive hydrogel robot to the ground, we constructed a hydrogel robot inspired by a caterpillar, which has an anisotropic double-layered structure by the interfacial diffusion polymerization method. Adding PVA and SA to PNIPAm will cause different conformation transitions. Therefore, sticking the two layers of hydrogel together will form a double-layer anisotropic structure. The ultra-high hydrophilicity of PVA and SA significantly reduces the contact angle of the hydrogel from 53.1° to about 10° and reduces its hydration time. The responsive time for bending 30° of the hydrogel robot has been greatly reduced from 1 h to half an hour through the enhancement of photo-thermal conversion and thermal conductivity via the addition of Fe3O4 nanoparticles. As a result, the fabricated hydrogel robot can achieve a high moving speed of 54.5 mm·h−1 on the ground. Additionally, the fabricated hydrogel has excellent mechanical strength and can endure significant flexibility tests. This work may pave the road for the development of soft robots and expand their applications in industry. [ABSTRACT FROM AUTHOR]

The present investigation addresses the mechanical properties, wear behaviour, and high-temperature oxidation of cermets and hardmetals based on either Ti(C,N) or WC and a metal binder based on Fe15Ni or Fe15Ni10Cr. This study also includes a commercial-grade WC-Co for comparative purposes. The production of these materials involved a powder metallurgy and sinter-HIP processing route under identical conditions. It is found that WC-based materials have superior mechanical properties, including hardness, fracture toughness, transversal rupture strength (TRS), and wear response, compared to Ti(C,N)-based materials. However, the latter show better oxidation behaviour than the former. Notably, WC-FeNi exhibits a higher hardness and TRS than the commercial-grade material (an increase of 7% and 9%, respectively). The difference in wear behaviour is due to the difference in wear mechanisms. In this regard, cermets wear through a tribolayer of Ti and Fe oxides, while hardmetals primarily wear through abrasion from ploughing. Thus, hardmetals exhibit a lower coefficient of friction (COF) and wear rate than cermets. Furthermore, Ti(C,N)-based materials form a protective layer of TiO2, which enhances their integrity and reduces mass gain. The addition of Cr to the FeNi binder only appears to have a clear effect on the TRS of the materials. [ABSTRACT FROM AUTHOR]

Due to their remarkable intrinsic physical properties, carbon nanotubes (CNTs) can enhance mechanical properties and confer electrical and thermal conductivity to polymers currently being investigated for use in advanced applications based on thermal management. An epoxy resin filled with varying concentrations of CNTs (up to 3 wt%) was produced and experimentally characterized. The electrical percolation curve identified the following two critical filler concentrations: 0.5 wt%, which is near the electrical percolation threshold (EPT) and suitable for exploring mechanical and piezoresistive properties, and 3 wt% for investigating thermo-electric properties due to the Joule effect with applied voltages ranging from 70 V to 200 V. Near the electrical percolation threshold (EPT), the CNT concentration in epoxy composites forms a sparse, sensitive network ideal for deformation sensing due to significant changes in electrical resistance under strain. Above the EPT, a denser CNT network enhances electrical and thermal conductivity, making it suitable for Joule heating applications. Numerical models were developed using multiphysics simulation software. Once the models have been validated with experimental data, as a perfect agreement is found between numerical and experimental results, a simulation study is performed to investigate additional physical properties of the composites. Furthermore, a statistical approach based on the design of experiments (DoE) was employed to examine the influence of certain thermal parameters on the final performance of the materials. The purpose of this research is to promote the use of contemporary statistical and computational techniques alongside experimental methods to enhance understanding of materials science. New materials can be identified through these integrated approaches, or existing ones can be more thoroughly examined. [ABSTRACT FROM AUTHOR]

Building formwork is a kind of temporary supporting structure consumable material used in the construction field. In recent years, building formwork has gradually developed to become lighter, more environmentally friendly, and have higher performance. This sets higher requirements for the materials used to make building formwork. There is an urgent need to find a lighter and more durable material for building formwork. Magnesium alloys possess the advantages of low density, high alkali resistance, and high strength. As a building formwork material, it can reduce the weight of formwork and improve its durability. Therefore, a magnesium alloy is considered a material with high potential for building formwork. Currently, magnesium alloy building formwork has attracted the attention of many companies and research and development institutions, with preliminary research applications and good feedback on usage effects. It is highly possible to obtain the opportunity to put it into market application. However, to be applied on a large scale, there are still some important problems that need to be solved. These problems fall into three main areas, including the relatively low processing efficiency of magnesium alloy materials, the unstable price of magnesium alloys, and the fact that the formwork is easily corroded during storage. Firstly, at present, the main processing methods for magnesium alloy building formwork are casting and extrusion, and the production efficiency of both methods needs to be improved. Secondly, high-performance magnesium alloy materials are usually more expensive, which is not conducive to the large-scale application of the formwork. The price of magnesium alloys has fluctuated greatly in recent years, which increases the difficulty of promoting magnesium alloy building formwork. Thirdly, in the atmosphere, the oxide film on the surface of the magnesium alloy cannot play an effective role in corrosion resistance. So, surface treatment is necessary for magnesium alloy building formwork. Among the various surface treatment methods for magnesium alloys, the chemical conversion method has the advantages of being easy to operate, cost-effective, and having good corrosion resistance. It may be a very suitable protective method for large-scale applications of magnesium alloy building formwork and possesses excellent potential for application. The future of magnesium alloy building formwork will focus on new low-cost materials, high-efficiency processing technology, and low-cost green anti-corrosion technology. With in-depth research and the maturation of technology, magnesium alloy formwork is expected to play a more important role in the construction industry. [ABSTRACT FROM AUTHOR]

This paper provides a comprehensive review of recent advancements in computational methods for modeling, simulation, and optimization of complex systems in materials engineering, mechanical engineering, and energy systems. We identified key trends and highlighted the integration of artificial intelligence (AI) with traditional computational methods. Some of the cited works were previously published within the topic: "Computational Methods: Modeling, Simulations, and Optimization of Complex Systems"; thus, this article compiles the latest reports from this field. The work presents various contemporary applications of advanced computational algorithms, including AI methods. It also introduces proposals for novel strategies in materials production and optimization methods within the energy systems domain. It is essential to optimize the properties of materials used in energy. Our findings demonstrate significant improvements in accuracy and efficiency, offering valuable insights for researchers and practitioners. This review contributes to the field by synthesizing state-of-the-art developments and suggesting directions for future research, underscoring the critical role of these methods in advancing engineering and technological solutions. [ABSTRACT FROM AUTHOR]

The article discusses the phenomena and destructive mechanisms occurring on the surface of 1.2344 steel dies used during the hot forging of disc-type forgings. Preliminary research has shown that gas nitriding alone, used so far, is insufficient due to the occurrence of destructive mechanisms other than abrasive wear, such as thermal and thermomechanical fatigue, which cause the average durability of such tools to be approximately 5000 forgings. Analyses were also carried out to assess the load on forging tools using numerical modeling (Forge 3.0NxT), which confirmed the occurrence of large and cyclically changing thermal and mechanical loads during the forging process. Therefore, in order to increase operational durability, it was decided to use two types of hybrid layers, differing in the PVD coating used: TiCrAlN and CrN, and then subjected to gas nitriding (GN). The obtained results showed that, depending on the area of the tool and the current working conditions, the applied PVD coatings protect the surface layer of the tool against the dominant destructive mechanisms. In both cases, the strength increased to the level of 7000 forgings, the tools could continue to work, and globally, slightly better results were obtained for the GN+TiCrAlN layer. The CrN-type layer protects the tool more against thermal fatigue, while the TiCrAlN layer is more resistant to abrasive wear. In areas where the hybrid layer was worn, a decrease in hardness was observed from 1300 HV to 600–700 HV, and in places of intense material flow (front—point 2 and tool bridge—point 9) the hardness dropped to below 400 HV, which may indicate local tempering of the material. Moreover, the research has shown that each process and tool should be analyzed individually, and the areas in the tool where particular destructive mechanisms dominate should be identified, so as to further protect the forging tool by using appropriate protective coatings in these areas. [ABSTRACT FROM AUTHOR]

This review focuses on recent advances in concrete durability using graphene oxide (GO) as a nanomaterial additive, with a goal to fill the gap between concrete technology, chemical interactions, and concrete durability, whilst providing insights for the adaptation of GO as an additive in concrete construction. An overview of concrete durability applications, key durability failure mechanisms of concrete, transportation mechanisms, chemical reactions involved in compromising durability, and the chemical alterations within a concrete system are discussed to understand how they impact the overall durability of concrete. The existing literature on the durability and chemical resistance of GO-reinforced concrete and mortar was reviewed and summarized. The impacts of nano-additives on the durability of concrete and its mechanisms are thoroughly discussed, particularly focusing on GO as the primary nanomaterial and its impact on durability. Finally, research gaps, future recommendations, and challenges related to the durability of mass-scale GO applications are presented. [ABSTRACT FROM AUTHOR]

This study aims to develop a procedure for the production of 3D-printed forearm prostheses (especially hard outer sockets). The production procedure is designed in the form of a parametric workflow (CAD model), which significantly speeds up the designing process of the prosthesis. This procedure is not fixedly dependent on the software (SW) equipment and is fully transferable into another SW environment. The use of these prostheses will significantly increase the comfort of their patients' lives. It is possible to produce prostheses faster and in larger amounts and variants by the usage of additive technology. The input for the own production of the prosthesis is a model of the internal soft socket of the patient. This soft socket (soft bed) is made by a qualified prosthetist. A 3D-scanned CAD model is obtained afterward using the scanning method by an automatic laser projector. An editable, parametric external socket (modifiable in any CAD format) is generated from the obtained 3D scan using a special algorithmic model. This socket, after the necessary individual modifications, is transferred to 3D printing technology and produced using powder technology Multi Jet Fusion (HP MJF). The result of the designed and tested procedure is a quickly editable 3D-printed outer socket (main part of prosthesis), which is able to fully replace the current long-fiber composite solution. Production of current solutions is relatively time-consuming, and only one piece is produced in a given time. The newly designed technology eliminates this. This study summarized the possibilities of speeding up the production of forearm prostheses (but not only these) by creating a parametric CAD model that is applicable to different patients. [ABSTRACT FROM AUTHOR]

Nanomanufacturing and digital manufacturing (DM) are defining the forefront of the fourth industrial revolution—Industry 4.0—as enabling technologies for the processing of materials spanning several length scales. This review delineates the evolution of nanomaterials and nanomanufacturing in the digital age for applications in medicine, robotics, sensory technology, semiconductors, and consumer electronics. The incorporation of artificial intelligence (AI) tools to explore nanomaterial synthesis, optimize nanomanufacturing processes, and aid high-fidelity nanoscale characterization is discussed. This paper elaborates on different machine-learning and deep-learning algorithms for analyzing nanoscale images, designing nanomaterials, and nano quality assurance. The challenges associated with the application of machine- and deep-learning models to achieve robust and accurate predictions are outlined. The prospects of incorporating sophisticated AI algorithms such as reinforced learning, explainable artificial intelligence (XAI), big data analytics for material synthesis, manufacturing process innovation, and nanosystem integration are discussed. [ABSTRACT FROM AUTHOR]

The optimization of structure and thermal properties in 3D-printed insulation materials remains an underexplored area in the literature. This study aims to address this gap by investigating the impact of 3D printing on the thermal properties of manufactured cellular composites. The materials studied were closed-cell foams with a complex cell structure based on the Voronoi cell model, manufactured using incremental technology (3D printing). The influence of the cellular structure of the composite, the type of material used, and the number of layers in the composite structure on its thermal properties, i.e., thermal conductivity coefficient, thermal resistance, and coefficient of heat transfer, was analyzed. Samples of different types of thermosetting resins, characterized by different values of emissivity coefficient, were analyzed. It was shown that both the type of material, the number of layers of the composite, and the number of pores in its structure significantly affect its thermal insulating properties. Thermal conductivity and permeability depended on the number of layers and decreased up to 30% as the number of layers increased from one to four, while thermal resistance increased to 35%. The results indicate that material structure is key in regulating thermal conduction. Controlling the number of cells in a given volume of composite (and thus the size of the air cells) and the number of layers in the composite can be an effective tool in designing materials with high insulation performance. Among the prototype composites produced, the best thermal performance was that of the metalized four-layer cellular composites (λ = 0.035 ± 0.002 W/m·K, Rc = 1.15 ± 0.02 K·m2/W, U = 0.76 ± 0.01 W/m2·K). [ABSTRACT FROM AUTHOR]

The cellular automata (CA) method has played an important role in the research and development of metallic materials. CA can interpret the microstructure changes of materials and obtain more abundant, accurate and intuitive information of microstructure evolution than conventional methods. CA can visually represent the process of grain formation, growth, development and change to us in a graphical way, which can assist us in analysis, thinking and solving problems. In the last five years, the application of CA in materials research has been rapidly developed, and CA has begun to occupy an increasingly important position in the simulation research of metallic materials. After introducing the advantages and limitations of CA compared to other widely used simulation methods, the purpose of this paper is to review the recent application progress on the microstructure simulation of metallic materials using CA, such as solidification, recrystallization, phase transformation and carbide precipitation occurring during forming and heat treatment. Specifically, recent research advances on microstructure simulation by CA in the fields of additive manufacturing, welding, asymmetrical rolling, corrosion prevention, etc., are also elaborated in this paper. Furthermore, this paper points out the future work direction of CA simulation in the research of metallic materials, especially in the simulation of the crystal structure, the prediction of mechanical properties, CA simulation software and rule systems, etc. These are expected to attract wide attention of researchers in the field of metallic materials and promote the development of CA in materials research. [ABSTRACT FROM AUTHOR]

Ce-doped gadolinium gallium aluminum oxide (Ce: GGAG) precursors were first prepared by the microwave-assisted homogeneous precipitation method (MAHP). Thermal gravity-differential thermal analysis (TG-DTA), X-ray diffraction (XRD), specific surface area analysis (BET) and field emission scanning electron microscopy (FE-SEM) were employed to investigate the crystal structure, phase evolution and morphologies of the Ce: GGAG precursors and powders. The influence of Ga ion concentration in the salt solution on the properties of Ce: GGAG powders was investigated. All the precursors were transformed into single-phase GGAG after being calcined at 950 °C in a furnace for 3 h. Monodispersed Ce: GGAG powders were obtained as the Ga ion concentration was lower than 0.06 mol/L. Single-phase and dense Ce: GGAG ceramics were obtained after sintering at 1600 °C in a flowing oxygen atmosphere for 10 h. Specifically, the Ce: GGAG ceramic reached its maximum density of ~6.68 g/cm3, which was close to its theoretical density of 6.70 g/cm3, and exhibited the highest optical transmittance of 65.2% at 800 nm after hot isostatic pressing sintering (HIP) as the Ga ion concentration was 0.02 mol/L. The decay time and light yield of the GGAG ceramic were 35 ns and 35,000 ± 1250 ph/MeV, respectively, suggesting that Ce: GGAG ceramics prepared using MAHP-synthesized nanopowders are promising for scintillation applications. [ABSTRACT FROM AUTHOR]

Particle assembly is a promising technique to create functional materials and devices from nanoscale building blocks. However, the control of particle arrangement and orientation is challenging and requires careful design of the assembly methods and conditions. In this study, the static and dynamic methods of particle assembly are reviewed, focusing on their applications in biomaterial sciences. Static methods rely on the equilibrium interactions between particles and substrates, such as electrostatic, magnetic, or capillary forces. Dynamic methods can be associated with the application of external stimuli, such as electric fields, magnetic fields, light, or sound, to manipulate the particles in a non-equilibrium state. This study discusses the advantages and limitations of such methods as well as nanoarchitectonic principles that guide the formation of desired structures and functions. It also highlights some examples of biomaterials and devices that have been fabricated by particle assembly, such as biosensors, drug delivery systems, tissue engineering scaffolds, and artificial organs. It concludes by outlining the future challenges and opportunities of particle assembly for biomaterial sciences. This review stands as a crucial guide for scholars and professionals in the field, fostering further investigation and innovation. It also highlights the necessity for continuous research to refine these methodologies and devise more efficient techniques for nanomaterial synthesis. The potential ramifications on healthcare and technology are substantial, with implications for drug delivery systems, diagnostic tools, disease treatments, energy storage, environmental science, and electronics. [ABSTRACT FROM AUTHOR]

Hoard finds from the Bronze Age have appeared all over Europe, prompting questions about their functions (either as raw materials for recycling or votive objects). The hoard trove of raw materials from Przybysław in Greater Poland is an interesting example of a discovery that is related to the foundry activities of Late Bronze Age and Early Iron Age communities (c. 600 BC). The deposit consists of fragments of raw materials that were damaged end products intended for smelting. The research included the characterisation of the material in terms of the variety of the raw materials that were used. The individual elements of the hoard were characterised in terms of their chemical compositions, microstructures, and properties. A range of modern instrumental research methods were used: metallographic macroscopic and microscopic observations by optical microscopy (OM), scanning electron microscopy (SEM), chemical-composition analysis by X-ray fluorescence spectroscopy (ED-XRF), X-ray microanalysis (EDS), and detailed crystallisation analysis by electron microscopy with an emphasis on electron backscatter diffraction (EBSD). As part of this study, model alloys were also prepared for two of the selected chemical compositions, (i.e., CuPbSn and CuPb). These alloys were analysed for their mechanical and technological properties. This research of the hoard from Przybysław (Jarocin district, Greater Poland) has contributed to the recognition and interpretation of the function and nature of the hoard by using modern research and modelling methods as a cultic raw material deposit. [ABSTRACT FROM AUTHOR]

This document is an editorial for a special issue of the journal "Materials" that focuses on "Soft Magnetic Materials and Their Applications." Soft magnetic materials are easily magnetized and demagnetized within magnetic fields and are used in electronics, energy conversion, and information processing. The special issue presents the latest advancements in the synthesis, characterization, and applications of soft magnetic materials, including soft ferrites, alloys, and composites. The papers cover topics such as improving high-frequency properties of soft ferrites, developing FeCo thin films for high-frequency electronic devices, and measuring and characterizing soft magnetic materials. The document discusses the applications of soft magnetic materials in electrical machines, motors, magnetic shielding structures, and atomic sensors. Various studies on the magnetic properties and performance of different soft magnetic materials are presented, suggesting their potential for enhancing the efficiency, sensitivity, and precision of electrical machines and sensors. The document concludes by acknowledging the authors and funding support for the research. [Extracted from the article]

This document discusses the progress in engineering polymeric materials and the importance of understanding their mechanical, electrical, and thermal properties. The use of modern materials in manufacturing is crucial for addressing global environmental pollution and achieving sustainable development. The document emphasizes the need for research and testing of new materials, particularly in the context of recycling and technological advancements. It also highlights the development of eco-innovative materials and the use of composites and polymer blends in various industries. The authors stress the importance of collaboration and knowledge exchange in achieving advancements in material recycling and energy recovery. [Extracted from the article]