Search

Most natural materials have rotational and hierarchical properties, so they can show excellent mechanical properties such as shear resistance and impact resistance. In order to further improve the energy absorption characteristics of vibration absorbing structures, a new type of honeycomb structure with integral rotation and group rotation is designed and characterized. The effects of the geometrical parameters of rotation Angle on the impact deformation mode, stress response curve and energy absorption characteristics of the honeycomb structure are studied through numerical simulation and experimental design. The results show that the overall honeycomb performance of 15° is better than that of 0°, the specific energy absorption is the results show that the overall honeycomb performance of 15° is better than that of 0°, the specific energy absorption is increased by 6%, the bearing capacity is increased by 320 N, and the crushing force efficiency is increased by 2%. Compared with the whole cell and the group cell, the specific absorption energy increased by 35%, 73% and 71%. The results of this paper provide a new insight into the impact performance of monolithic and grouped rotating honeycomb structures, which is helpful for the results of this paper provide a new insight into the impact performance of monolithic and grouped rotating honeycomb structures, which is helpful for the optimization of crashworthiness structural design. [ABSTRACT FROM AUTHOR]

Laser Engineered Net Shaping (LENSTM) is currently a promising and developing technique. It allows for shortening the time between the design stage and the manufacturing process. LENS is an alternative to classic metal manufacturing methods, such as casting and plastic working. Moreover, it enables the production of finished spatial structures using different types of metallic powders as starting materials. Using this technology, thin-walled honeycomb structures with four different cell sizes were obtained. The technological parameters of the manufacturing process were selected experimentally, and the initial powder was a spherical Ti6Al4V powder with a particle size of 45–105 µm. The dimensions of the specimens were approximately 40 × 40 × 10 mm, and the wall thickness was approximately 0.7 mm. The geometrical quality and the surface roughness of the manufactured structures were investigated. Due to the high cooling rates occurring during the LENS process, the microstructure for this alloy consists only of the martensitic α' phase. In order to increase the mechanical parameters, it was necessary to apply post processing heat treatment leading to the creation of a two-phase α + β structure. The main aim of this investigation was to study the energy absorption of additively manufactured regular cellular structures with a honeycomb topology under static and dynamic loading conditions. [ABSTRACT FROM AUTHOR]