Search

Global warming has led to a change in climatic conditions. Since 2006, drought has contributed to a reduction of food production and other agriculture-based products in many countries. The accumulation of greenhouse gases in the atmosphere has caused some changes in the composition of fruits and vegetables, making them less nutritious. To analyse this situation, a study was conducted on the effect of drought on the quality of fibres provided by the main fibre crops in Europe, namely flax (Linum usitatissimum). The experiment consisted of growing flax under controlled comparative conditions with designed different irrigation levels, such as 25%, 35% and 45% field soil moisture. Three varieties of flax were grown in 2019, 2020 and 2021 in the greenhouses of the Institute of Natural Fibres and Medicinal Plants in Poland. Fibre parameters, such as linear density, length and strength, were evaluated according to relevant standards. In addition, scanning electron microscope images of the cross-section and longitudinal view of the fibres were analysed. The results of the study indicated that deficiency of water during the flax growing season resulted in lowering of fibre linear density and tenacity. [ABSTRACT FROM AUTHOR]

A persistent rise in the costs of construction materials has led to the need to address this problem in line with the Sustainable Development Goals. This research employed vegetal soft and rigid fibers in a screed mortar to produce a sustainable fabric–cement matrix. Four different vegetal-dried fibers (hemp, flax, miscanthus, and bamboo) with dosages of 0.4, 0.6, 0.8, 1.2, 2, and 4 kg/m3 were used. Laboratory investigations were slump test, bulk density, air occluded, shrinkage, and mechanical strength. Scanning Electron Microscope (SEM) assessments were performed and analyzed on the natural fibers and the screed formulation. The results highlight that fiber dosages significantly influence the above-mentioned properties. [ABSTRACT FROM AUTHOR]

The study investigated the effectiveness of the combination of chemical and physical methods of natural fibers' modification. The long flax fibers were subjected to various types of modification. These were silanization, plasma modification and a combination of these methods. For the silanization process, two types of silanes were used: amino- and vinylsilane. The application of structurally different compounds allowed us to acquire knowledge about the effect of the modifier structure on its properties. Various properties of flax fibers were investigated, comparing the results before and after different modification processes. The flammability of prepared samples were tested by pyrolysis combustion flow calorimeter (PCFC). In the effect of the natural fibers' modifications, flammability was reduced even by 30%. The thermal stability of modified fibers increased. The FTIR tests of the gases released during thermal degradation of the tested fibers allowed us to determine the important compounds and prove a lower degree of flax-fiber decomposition after modification. Flax fibers were also tested to evaluate their physical properties (linear mass, average diameter, aspect ratio and hygroscopicity). Changes in surface morphology were observed by scanning electron microscope (SEM). The properties of natural fibers improved significantly, thus contributing to an increase in their suitability for the use in composites. [ABSTRACT FROM AUTHOR]