Search

This paper describes methods for evaluating the thermal properties of textile materials, clothing composites, and clothing using an integrated measurement system that includes a hot plate, a multi-purpose differential conductometer, a thermal manikin, a temperature gradient measurement device, and a device for measuring the physiological parameters of the human body during the exact evaluation of garment thermal comfort. In practice, measurements were taken on four types of materials widely used in the production of conventional and protective clothing. The measurements were carried out using a hot plate and a multi-purpose differential conductometer, determining the thermal resistance of the material both in its uncompressed form and when a force was applied that was ten times greater than that needed to determine its thickness. Using a hot plate and a multi-purpose differential conductometer, thermal resistances of textile materials were assessed at different levels of material compression. On hot plates, both conduction and convection had an impact on thermal resistance, but in the multi-purpose differential conductometer, only conduction did. Moreover, a reduction in thermal resistance was observed as a result of compressing textile materials. [ABSTRACT FROM AUTHOR]

The transport of liquid sweat in clothing worn close to human skin is very important from the point of view of the thermo-physiological comfort of clothing users. It ensures the drainage of sweat secreted by the human body and condensed on the human skin. In the presented work, knitted fabrics made of cotton and cotton blends with other fibers (elastane, viscose, polyester) were measured in the range of liquid moisture transport using the Moisture Management Tester MMT M290. The fabrics were measured in unstretched form and stretched to 15%. Stretching of the fabrics was performed using the MMT Stretch Fabric Fixture. Obtained results confirmed that stretching significantly changed the values of parameters characterizing the liquid moisture transport in the fabrics. Before stretching, the best liquid sweat transport performance was stated for the KF5 knitted fabric made of 54% cotton and 46% polyester. For this, the greatest value (10 mm) of maximum wetted radius for the bottom surface was obtained. The Overall Moisture Management Capacity (OMMC) of the KF5 fabric was 0.76. This was the highest value among all values obtained for the unstretched fabrics. The lowest value of the OMMC parameter (0.18) was stated for the KF3 knitted fabric. After stretching, the KF4 fabric variant was assessed as the best one. Its OMMC improved from 0.71 before stretching to 0.80 after stretching. The value of the OMMC for the KF5 fabric remained after stretching at the same level (0.77) than before stretching. The most significant improvement was observed for the KF2 fabric. Before stretching, the value of the OMMC parameter for the KF2 fabric was 0.27. After stretching, the OMMC value increased to 0.72. It was also stated that the changes in the liquid moisture transport performance of the investigated knitted fabrics were different for the particular fabrics being investigated. Generally, in all cases, the ability of the investigated knitted fabrics to transfer liquid sweat was improved after stretching. [ABSTRACT FROM AUTHOR]