Search

RILEM TC 267 TRM– "Tests for Reactivity of Supplementary Cementitious Materials" recommends the Rapid Reliable Relevant (R3) test as a method for determining the chemical reactivity of supplementary cementitious materials (SCMs) in Portland cement blends. In this paper, the R3 test was applied to 52 materials from a wide range of conventional and alternative SCMs with the aim to validate such test. An excellent correlation was found between the cumulative heat release and the bound water determined following the R3 test method. Comparison of the R3 test results to mortar compressive strength development showed that all conventional SCMs (e.g. blast furnace slag and fly ashes) followed the same trend, with the notable exception of very reactive calcined kaolinitic clays. It is discussed, through an in-depth statistical regression analysis of the R3 reactivity test results and the 28 days relative compressive strengths, how reactivity threshold values for classification of the chemical reactivity of SCMs could be proposed based on the R3 test results. [ABSTRACT FROM AUTHOR]

The results of phase 1 of an interlaboratory test, coordinated by the RILEM TC 267-TRM "Tests for Reactivity of Supplementary Cementitious Materials" showed that the R3 (rapid, relevant, reliable) test method, by measurement of heat release or bound water, provided the most reliable and relevant determination of the chemical reactivity of supplementary cementitious materials (SCMs), compared to other test methods. The phase 2 work, described in this paper aimed to improve the robustness of the test procedure and to develop precision statements for the consolidated test procedure. The effect of the pre-mixing and mixing conditions, and the impact of the mix design on the test method robustness were assessed and fixed for optimal conditions to carry out the R3 heat release test. The effect of the drying step was evaluated to define the R3 bound water test procedure in more detail. Finally, the robustness of the consolidated final test methods was determined by an interlaboratory study to define the precision statements. [ABSTRACT FROM AUTHOR]

RILEM TC 267-TRM is studying tests for the reactivity supplementary cementitious materials (SCMs). In the first phase, the lime reactivity (LR) test, which is standardised in Indian standard (IS)-1727, gave promising correlations with 90-days cement mortar strength. In Phase 2, working group 1 has looked at further optimisation and robustness study of the LR test. A parameter screening approach for improving the mix design to use fixed mass proportions targeting enhanced reproducibility and robustness was focused. The parameters studied include mixture properties such as the effects of lime (hydrated lime/calcium hydroxide-CH) to SCM ratio, water to binder (binder = CH + SCM) ratio (w/b), activators, curing temperature, and testing age as well as the impact of factors from different national standards (IS and European Committee for Standardisation-EN) such as mould size, shape & type of sand. The modified mixture recommended by the TC uses a fixed CH to SCM mass ratio of 1:1 and the addition of activators. Also, a higher curing temperature of 50 °C in comparison to the 27 °C specified in IS 1727, for the first 2 days is proposed to accelerate the early hydration especially for slowly reacting SCMs. It is also recommended that, the minimum purity and fineness of the CH need to be specified to obtain reproducible results. [ABSTRACT FROM AUTHOR]

This paper is the work of working group 3 of the RILEM Technical Committee on Hydration and Microstructure of Concrete with SCM (TC 238-SCM). The pore solution is an essential but often overlooked part of hydrated cements. The composition of the cement pore solution reflects the ongoing hydration processes and determines which solid phases are stable and may precipitate, and which phases are unstable and may dissolve. The study of the cement pore solution therefore contributes to the understanding of the mechanisms as well as of the kinetics of cement hydration. This paper reviews the impact of supplementary cementitious materials (SCMs) on the pore solution composition of blended cements. In a first part, the extraction and analysis methods of cement pore solutions are reviewed, leading to a set of practical guidelines and recommendations. In a second part, an extensive literature survey is used to document the effect of the addition of SCMs (blast furnace slag, fly ash and silica fume) on the pore solution. Finally, in a third part the collected literature data are compared to thermodynamic simulations. The performance and current limitations of thermodynamic modelling of blended cement hydration are demonstrated and discussed in view of future progress. [ABSTRACT FROM AUTHOR]

A primary aim of RILEM TC 267-TRM: "Tests for Reactivity of Supplementary Cementitious Materials (SCMs)" is to compare and evaluate the performance of conventional and novel SCM reactivity test methods across a wide range of SCMs. To this purpose, a round robin campaign was organized to investigate 10 different tests for reactivity and 11 SCMs covering the main classes of materials in use, such as granulated blast furnace slag, fly ash, natural pozzolan and calcined clays. The methods were evaluated based on the correlation to the 28 days relative compressive strength of standard mortar bars containing 30% of SCM as cement replacement and the interlaboratory reproducibility of the test results. It was found that only a few test methods showed acceptable correlation to the 28 days relative strength over the whole range of SCMs. The methods that showed the best reproducibility and gave good correlations used the R3 model system of the SCM and Ca(OH)2, supplemented with alkali sulfate/carbonate. The use of this simplified model system isolates the reaction of the SCM and the reactivity can be easily quantified from the heat release or bound water content. Later age (90 days) strength results also correlated well with the results of the IS 1727 (Indian standard) reactivity test, an accelerated strength test using an SCM/Ca(OH)2-based model system. The current standardized tests did not show acceptable correlations across all SCMs, although they performed better when latently hydraulic materials (blast furnace slag) were excluded. However, the Frattini test, Chapelle and modified Chapelle test showed poor interlaboratory reproducibility, demonstrating experimental difficulties. The TC 267-TRM will pursue the development of test protocols based on the R3 model systems. Acceleration and improvement of the reproducibility of the IS 1727 test will be attempted as well. [ABSTRACT FROM AUTHOR]