Search

Curved welds were designed and the effects of the weld curvature radius and tool rotation direction on the microstructure of friction stir welded cast aluminum alloy joints were investigated. Results show that both the weld curvature radius and tool rotation direction have a significant influence on the microstructure of the curved joints during FSW. With decreasing weld curvature radius, the size of the tunnel defect is reduces and the proportion of fine Si particles in the stir zone increases. Si particles are finer and denser in the retreating side (RS) than that in the advancing side (AS) when both the welding direction and tool rotation direction are anticlockwise. However, when the welding direction is anticlockwise while the tool rotates clockwise, the proportions of fine Si particles decrease compared to the former situation. Furthermore, the tunnel defect is more likely to be present in the AS in the former situation.

Series of welds were made by friction stir welding (FSW) with various backplates made out of materials ranging from low diffusivity granite to high diffusivity copper in order to reveal the effect of backplate diffusivity on the joint microstructure and properties. The temperature, microstructure, microhardness and tensile properties of joints were compared and discussed. Results show that the backplate with high diffusivity effectively decreases the heat input to the workpiece during FSW. With decreasing the backplate diffusivity the sizes of equiaxed recrystallized grains in the nugget zone increase obviously, while the hardness of the nugget zone also increases a little. The interface between the thermo-mechanically affected zone and nugget zone at the retreating side disappears under the granite backplate. Moreover, the ductility of the joint is more excellent under the copper backplate, but under the granite backplate the failure has mixed fracture characteristics of quasi-cleavage and dimples.

A method of in situ joining of titanium to SiC/Al composites by low pressure infiltration was proposed. The effect of infiltration temperature on microstructure and bending strength of in situ joining composites was investigated and the best infiltration temperature was confirmed to be 710 °C. The interfacial region of SiC/Al/Ti composites was consisted of Ti substrate, Al–Ti interfacial layer, Al layer and SiC/Al composite. The bending strength of SiC/Al composites kept nearly constant as the infiltration temperature changed while that of SiC/Al/Ti composites was influenced significantly by the infiltration temperature. The fracture occurred at the Al–Ti and Al–SiC/Al interfaces alternately as infiltrated at 670 °C. But as the infiltration temperature was increased to 710 °C, the fracture occurred only at the Al–SiC/Al interface which shows a great interfacial bonding at the Al–Ti interface. The formation of Al–Ti brittle intermetallics and the effect of crystallization and grain coarsening are two possible reasons which lead to the decrease of bending strength when the infiltration temperatures were increased from 710 °C to 730 °C.