Search

The building and construction industry’s demand for steel reinforcement bars has increased with the rapid growth and development in the world. However, steel production contributes to harmful waste and emissions that cause environmental pollution and climate change-related problems. In light of sustainable construction practices, bamboo, a readily accessible and eco-friendly building material, is suggested as a viable replacement for steel rebars. Its cost-effectiveness, environmental sustainability, and considerable tensile strength make it a promising option. In this research, hybrid beams underwent analysis through the use of thoroughly validated finite element models (FEMs), wherein the replacement of steel rebars with bamboo was explored as an alternative reinforcement material. The standard-size beams were subjected to three-point loading using FEMs to study parameters such as the load–deflection response, energy absorption, maximum capacity, and failure patterns. Then, gene expression programming was integrated to aid in developing a more straightforward equation for predicting the flexural strength of bamboo-reinforced concrete beams. The results of this study support the conclusion that the replacement of a portion of flexural steel with bamboo in reinforced concrete beams does not have a detrimental impact on the overall load-bearing capacity and energy absorption of the structure. Furthermore, it may offer a cost-effective and feasible alternative.

The culverts are used to safely convey water under railways, highways, and overpasses. They are utilized in drainage areas or water channels and in areas where the bearing capacity of soil is low. The design and construction of this crucial infrastructure need to be improved to meet contemporary demands of reliability and affordability. Precast reinforced box culverts are popular alternatives as they ensure strength, durability, rigidity, and economy. This research seeks to develop an effective and affordable design improvement procedure for a precast box culvert using modern numerical tools. The Finite Element Method (FEM) based approach is used in studying the effects of haunch geometry and additional steel reinforcement on the load-bearing capacity of box culverts. A conventional box culvert is analyzed to create the numerical models in the Abaqus FEM code and to investigate the load-bearing capacity of culverts with an expanded span. The outcomes of the study reveal the critical places for stress concentration as well as the location of maximum damage. It is found that haunch geometry and additional reinforcement at these critical places significantly affect the load-carrying capacity of a culvert. From the comparison of capacity curves of models with and without haunches and diagonal reinforcement, it is found that a 25% increase in load-carrying capacity is achievable with the recommended changes. The proposed design improvement technique can be employed for the cost-effective and safe design of a concrete box culvert with larger span lengths and high water-flowing capacities. The findings of this study are expected to assist practitioners in strength enhancement tasks of box culverts for increased structural stability and drainage efficiency.

Beam–column connections are the most critical components of reinforced concrete (RC) structures. They serve as a load transfer path and take a significant portion of the overall shear. Joints in RC structures constructed with no seismic provisions have an insufficient capacity and ductility under lateral loading and can cause the progressive failure of the entire structure. The joint may fail in the shear prior to the connecting beam and column elements. Therefore, several modeling techniques have been devised in the past to capture the non-linear response of such joints. Modeling techniques used to capture the non-linear response of reinforced-concrete-beam–column joints range from simplified lumped plasticity models to detailed fiber-based finite element (FE) models. The macro-modeling technique for joint modeling is highly efficient in terms of the computational effort, analysis time, and computer memory requirements, and is one of the most widely used modeling techniques. The non-linear shear response of the joint panel and interface bond–slip mechanism are concentrated in zero-length linear and rotational springs while the connecting elements are modeled through elastic elements. The shear response of joint panels has also been captured through rigid panel boundary elements with rotational springs. The computational efficiency of these models is significantly high compared to continuum models, as each joint act as a separate supe-element. This paper aims to provide an up-to-date review of macro-modeling techniques for the analysis and assessment of RC-beam–column connections subjected to lateral loads. A thorough understanding of existing models is necessary for developing new mechanically adequate and computationally efficient joint models for the analysis and assessment of deficient RC connections. This paper will provide a basis for further research on the topic and will assist in the modification and optimization of existing models. As each model is critically evaluated, and their respective capabilities and limitations are explored, it should help researchers to improve and build on modeling techniques both in terms of accuracy and computational efficiency.