Search

In a continuously changing world where the human operator still plays an important role in most industrial activities, health and safety occupies a fundamental place, with the goal of maintaining workers healthy and in safe condition during their job activities. One of the means that make this goal achievable is the use of adequate personal protective equipment. The carabiners are connecting parts that link the components quickly and reversibly of personal protective equipment used against falls. Thus shackles can be divided in multiple elements, such as: the gate, which always opens inward and can be provided with or without the locking system, the second and the biggest element is the body which can have different form according to the BS EN 12275:2013 standard, the gate and the body are connected thru the rivet pin and nose. The personal fall arrest system used in areas such as construction, speleology, petroleum industry, includes metal components that must possess high mechanical properties, especially shock-resistance. In order to improve resilience, a layer of rubber paint will be deposited on the carabiner surface. The aim of this study is to analyse the influence of rubber coating on the carabiners shock resistance.

To ensure customer satisfaction, the products made by aviation, space and defense organizations need to be continuously improved from the point of view of safety, security, reliability and maintainability. The improvement goal is to be at the customers' requirements and legislations level, if not even to overcome it. The occurring problem with the final products is the challenge to ensure their quality in a shorter time. In this research the importance of implementing the APQP concept in the aeronautical industry is highlighted. To achieve this purpose, the methodologies needed to ensure that the product development processes of the aviation, space and defense industry are fully integrated processes ranging from concept and design to planning, manufacturing and production, aiming the product good use, a quality service and finally getting a positive customer feedback. The final goal of this concept implementing is the Production Part Approval Process (PPAP), which is actually the main result of APQP confirming that the manufacturing process has demonstrated the potential to achieve products that consistently fulfil absolutely all the expressed and not expressed customer requirements.

This scientific paper addresses the importance of water treatment process until it becomes drinkable, studying the treatment process from different points of view that are considered to be relevant. The choice of this subject was motivated by the water consumption importance for the entire population, the scientific paper proposing to study in what way this water treatment process could be improved, using for analysis two methods of experimental statistical modeling, namely the Taguchi's method and the factorial experiment method. The purpose of this scientific paper was to identify the deficiencies of the water treatment process after it entered the treatment plant and analyze is carried out using the two mentioned methods above, were continued by finding optimization solutions for the process. These solutions are intended to avoid the situations in which the treatment plant may be unable to cover the required volume of drinking water and to ensure the quality of the drinking water supplied to consumers according to the legislation to date. The knowledge benefit of this research consists in the realization of the research intentions formulated and the practical applicability of the results.

The severe damage to civilian buildings, public area, jet aircraft impact and defense target under explosive blast loading can cause a huge property loss. Most of researcher discusses the topics on design the concrete material model to sustain againts the explosive detonation. The implementation of modern reinforcement steels and fibres in ordinary Portland cement (OPC) concrete matrix can reduce the extreme loading effects. However, most researchers have proved that geopolymer concrete (GPC) has better mechanical properties towards high performance concrete, compared to OPC. GPC has the high early compressive strength and high ability to resist the thermal energy from explosive detonation. In addition, OPC production is less environmental friendly than geopolymer cement. Geopolymer used can lead to environmental protection besides being improved in mechanical properties. Thus, this paper highlighted on an experimental, numerical and the analytical studies cause of the explosive detonation impact to concrete structures.