Search

Friction Stir Welding, abbreviated FSW is a new and innovative welding process. This welding process is increasingly required, more than traditional arc welding, in industrial environment such us: aeronautics, shipbuilding, aerospace, automotive, railways, general fabrication, nuclear, military, robotics and computers. FSW, more than traditional arc welding, have a lot of advantages, such us the following: it uses a non-consumable tool, realise the welding process without melting the workpiece material, can be realised in all positions (no weld pool), results of good mechanical properties, can use dissimilar materials and have a low environmental impact. This paper presents the results of experimental investigation of friction stir welding joints to three dissimilar aluminium alloy AA2024, AA6061 and AA7075. For experimenting the value of the input process parameters, the rotation speed and advancing speed were kept the same and the position of plates was variable. The exit date recorded in the time of process and after this, will be compared between them and the influence of position of plate will be identified on the welding seams properties and the best position of plates for this process parameters and materials.

Welding copper and its alloys is usually difficult to achieve by conventional fusion welding processes because of high thermal diffusivity of copper, which is at least 10 times higher than most steel alloys. In order to reduce the increased temperature loss, it would be advantageous to use a process that is carried out at lower temperatures. Friction Stir Welding (FSW) is a solid state joining process that involves the joining of two metal pieces at the molecular level without melting and was explored as a feasible welding process. In order to achieve an increased welding speed and a reduction in tool wear, this process is assisted by another one (TIG - tungsten inert gas) which generates and adds heat to the process. The research includes two experiments for the FSW process and two experiments for TIG assisted FSW process. It is presented the evolution of the temperature and of the axial force during the process and is determined the microhardness for each experimental case. The aim of this paper is to make known the effects of using TIG assisted FSW process on the microhardness of the pure copper joints and to present some conditions in which it is less affected.