Search

In this work, poly(vinylidene fluoride) (PVDF)‐bismuth vanadate (Bi4V2O11; BVO)‐sodium dodecyl sulfate (SDS) composite films are fabricated by the solution casting method. The frequency dependence of the dielectric and electric performances of the resultant PVDF‐BVO‐SDS composites on various weight percentages of SDS contents is investigated. The results demonstrate that the three‐component PVDF‐BVO‐SDS composites have a superior dielectric constant (96) and suppressed dielectric loss (<1) at 102 Hz for 20 wt% of SDS contents. The surface morphology of the PVDF‐BVO‐SDS composites shows that SDS is successfully reinforced on the PVDF‐BVO matrix with better homogeneity. The ac conductivity of the PVDF‐BVO‐SDS composites is also improved, which is helpful for the enhancement of the dielectric constant and relatively low loss in the composites. Moreover, the PVDF‐BVO‐SDS composite also exhibits a larger value of the dielectric constant (96) than the pristine PVDF matrix, which is 15 times higher than that of the pristine one. These significantly enhanced dielectric and electrical characteristics of PVDF‐BVO‐SDS composites will fulfill the practical criteria for their use in high dielectric‐constant capacitors and energy storage devices. [ABSTRACT FROM AUTHOR]

In this work, the graphite nanopowder (GNP) reinforced poly(vinyl alcohol) based Bismuth ferrite (BiFeO3; BFO) composite films with different weight percentages of GNP using a solution casting technique. The electrical properties of GNP‐reinforced PVA composites are investigated using a complex impedance spectroscopy (CIS) technique to show the bulk and grain effect with the rise in frequency by an impedance analyzer in a frequency range from 102 to 106 Hz at room temperature. The single semicircle is showing in the complex planes using the real and imaginary impedance characteristics. The GNP‐reinforced PVA composite films show evidence of bulk and grain impact in complicated impedance analysis. Based on the Nyquist plot, it appeared that only the bulk effects of the resultant composite systems are present. [ABSTRACT FROM AUTHOR]

A facile solvent casting technique has been reported in the fabrication of surface hydroxylated ZnFe2O4 (h‐ZFO) nanoparticles (NPs) filled with poly(vinylidene fluoride) (PVDF) as a matrix. The h‐ZFO filler particles are synthesized from neat ZnFe2O4. The dielectric and electric performance of polymer‐based composites is much related to the interface binding between filler particles and polymer matrix. In this work, the surface alternation technique employed a new path is developed to improve the compatibility between ZFO particles and the PVDF matrix. These PVDF‐ZFO composites were studied by X‐ray diffractometer (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The h‐ZFO‐PVDF and ZFO‐PVDF composites are carefully analyzed by dielectric and electric properties by a wide range of frequencies. However, the morphological analysis exhibits uniform dispersion of the h‐ZFO NPs in the PVDF matrix. The h‐ZFO‐PVDF composites have a dielectric constant of about 35 for 1.5 wt.% of filler contents. Moreover, the h‐ZFO‐PVDF composites have lower dielectric loss than PVDF‐ZFO composites. It is suggested that the strong interaction between h‐ZFO filler particles and the PVDF matrix is the main reason for the improvement of dielectric properties. The outcomes of these methods have great potential for making high dielectric constants and relatively suppressed loss PVDF‐ZFO composites for advanced practical applications. [ABSTRACT FROM AUTHOR]