Search

Various conditions, including traffic accidents, sports injuries, and neurological disorders, can impair human wrist movements, underscoring the importance of effective rehabilitation methods. Robotic devices play a crucial role in this regard, particularly in wrist rehabilitation, given the complexity of the human wrist joint, which encompasses three degrees of freedom: flexion/extension, pronation/supination, and radial/ulnar deviation. This paper provides a comprehensive review of wrist rehabilitation devices, employing a methodological approach based on primary articles sourced from PubMed, ScienceDirect, Scopus, and IEEE, using the keywords “wrist rehabilitation robot” from 2007 onwards. The findings highlight a diverse array of wrist rehabilitation devices, systematically organized in a tabular format for enhanced comprehension. Serving as a valuable resource for researchers, this paper enables comparative analyses of robotic wrist rehabilitation devices across various attributes, offering insights into future advancements. Particularly noteworthy is the integration of serious games with simplified wrist rehabilitation devices, signaling a promising avenue for enhancing rehabilitation outcomes. These insights lay the groundwork for the development of new robotic wrist rehabilitation devices or to make improvements to existing prototypes incorporating a forward-looking approach to improve rehabilitation outcomes.

Aliquoting of biological samples refers to the process of dividing a larger biological sample into smaller, representative portions known as aliquots. This procedure is commonly employed in laboratories, especially in fields like molecular biology, genetics, and clinical research. Currently, manual dosing devices are commonplace in laboratories, but they demand a significant amount of time for their manual operation. The automated dosing devices available are integrated into narrowly focused aliquoting systems and lack versatility as manipulator equipment. Addressing this limitation, a novel technical solution is proposed in this paper for a modular dosing device compatible with robotic manipulators. The paper introduces and details a mathematical model, optimizes its parameters, and constructs a detailed 3D model using the NX environment to demonstrate the engineering feasibility of our concept. It further outlines the development of a three-dimensional dynamic simulation model for the dosing device, comparing analytical calculations with simulation results. The construction of a dosing device prototype is discussed, followed by a comprehensive experimental validation.

Domestic chimney cleaning is still mostly a manual procedure which can be overly complex, dangerous, and expansive. This paper describes the design of a novel robotic device for chimney cleaning that aims to provide a valuable alternative solution to the traditional manual techniques with user-friendly and low-cost features. The proposed device enables a significant reduction in operator risks, including roof falling and soot dust contact. The paper’s content describes, in detail, the design process, including a definition of the main design requirements and steps towards the manufacturing of a preliminary prototype. Moreover, a preliminary validation is described through laboratory tests to demonstrate the engineering feasibility and effectiveness of the proposed design solution for the intended semi-autonomous chimney-cleaning application.

This article presents a model of a novel 4-DOF kinematically redundant planar parallel grasping manipulator. As distinct from the traditional 4-DOF manipulator, the proposed design includes an extensible platform, which provides kinematic redundancy. This constructive feature is used for grasping. The article discusses the inverse and forward kinematics of the proposed manipulator. The inverse kinematics algorithm provides the analytical relations between the platform coordinates and the driven (controlled) coordinates. The forward kinematics algorithm allows defining different assembly modes of the manipulator. Both algorithms are demonstrated using numerical examples. The article discusses different designs of the manipulator in which its links are placed in one, two, or three layers. Based on these designs, we performed their workspace analyses.

This Special Issue is aimed to promote and circulate recent developments and achievements in the field of Mechanism and Machine Science coming from the Italian community with international collaborations and ranging from theoretical contributions to experimental and practical applications [...]

This paper analyses some effective strategies proposed in the last few years to tackle contact mechanics problems involving rough interfaces. In particular, we present Boundary Element Methods capable of solving the contact with great accuracy and, at the same time, with a marked computational efficiency. Particular attention is paid to non-linearly elastic constitutive relations and, specifically, to a linearly viscoelastic rheology. Possible implications deal with all the tribological mechanical systems, where contact interactions are present, including, e.g., seals, bearings and dampers.

Robot rehabilitation devices are attracting significant research interest, aiming at developing viable solutions for increasing the patient’s quality of life and enhancing clinician’s therapies. This paper outlines the design and implementation of a low-cost robotic system that can assist finger motion rehabilitation by controlling and adapting both the position and velocity of fingers to the users′ needs. The proposed device consists of four slider-crank mechanisms. Each slider-crank is fixed and moves one finger (from the index to the little finger). The finger motion is adjusted through the regulation of a single link length of the mechanism. The trajectory that is generated corresponds to the natural flexion and extension trajectory of each finger. The functionality of this mechanism is validated by experimental image processing. Experimental validation is performed through tests on healthy subjects to demonstrate the feasibility and user-friendliness of the proposed solution.

The study provides a solution to a dimensional synthesis problem for a hexapod-type reconfigurable parallel mechanism, which can change its configuration to realize different trajectories of its output link while having a single drive. The work presents an original procedure to find the dimensions of some mechanism’s links and their initial configuration to reproduce these trajectories. After describing the mechanism, the paper examines kinematic relations representing the basis for the subsequent synthesis algorithm. Next, the obtained expressions are extended and provide a system of equations to be solved. The structure of this equation system allows it to be solved effectively by numerical methods, which is demonstrated with an example. The proposed algorithm of dimensional synthesis does not require solving the optimization problems, in contrast to the familiar methods of dimensional synthesis of parallel mechanisms. Further, the suggested approach to the synthesis problem allows finding solution in a fast and computationally efficient manner.

This paper addresses the design of a novel mechatronic device for saffron harvesting. The main proposed challenge consists of proposing a new paradigm for semi-automatic harvesting of saffron flowers. The proposed novel solution is designed for being easily portable with user-friendly and cost-oriented features and with a fully electric battery-powered actuation. A preliminary concept design has been proposed as based on a specific novel cam mechanism in combination with an elastic spring for fulfilling the detachment of the flowers from their stems. Numerical calculations and simulations have been carried out to complete the full design of a proof-of-concept prototype. Preliminary experimental tests have been carried out to demonstrate the engineering feasibility and effectiveness of the proposed design solutions, whose concept has been submitted for patenting.

Assessing passenger cars’ dynamic performance is a critical aspect for car industries, due to its impact on the overall vehicle safety evaluation and the subjective nature of the involved handling and comfort metrics. Accordingly, ISO standards, such as ISO 4138 and ISO 3888, define several specific driving tests to assess vehicle dynamics performance objectively. Consequently, proper evaluation of the dynamic behaviour requires measuring several physical quantities, including accelerations, speed, and linear and angular displacements obtained after instrumenting a vehicle with multiple sensors. This experimental activity is highly demanding in terms of hardware costs, and it is also significantly time-consuming. Several approaches can be considered for reducing vehicle development time. In particular, simulation software can be exploited to predict the approximate behaviour of a vehicle using virtual scenarios. Moreover, motion platforms and detail-scalable numerical vehicle models are widely implemented for the purpose. This paper focuses on a customized simulation environment developed in C++, which exploits the advantages of object-oriented programming. The presented framework strives to perform concurrent simulations of vehicles with different characteristics such as mass, tyres, engine, suspension, and transmission systems. Within the proposed simulation framework, we adopted a hierarchical and modular representation. Vehicles are modelled by a 14 degree-of-freedom (DOF) full-vehicle model, capable of capturing the dynamics and complemented by a set of scalable-detail models for the remaining sub-systems such as tyre, engine, and steering system. Furthermore, this paper proposes the usage of autonomous virtual drivers for a more objective evaluation of vehicle dynamic performances. Moreover, to further evaluate our simulator architecture’s efficiency and assess the achieved level of concurrency, we designed a benchmark able to analyse the scaling of the performances with respect to the number of different vehicles during the same simulation. Finally, the paper reports the proposed simulation environment’s scalability resulting from a set of different and varying driving scenarios.

This paper outlines the design process for achieving a novel four-legged robot for exploration and rescue tasks. This application is also intended as an educational mean for masters’ students aiming at gaining skills in designing and operating a complex mechatronic system. The design process starts with an analysis of the desired locomotion and definition of the main requirements and constraints. Then, the paper focuses on the key design challenges, including analytical/numerical modeling and simulations of kinematic and dynamic performances. Specific attention is addressed to the manufacturing of a proof-of-concept prototype, including mechanical and control hardware, as well as the development of the needed software for an autonomous operation. Preliminary tests were carried out, to validate the main features required by the final prototype, to prove its feasibility and user-friendliness, as well as the effectiveness of this complex mechatronic design task for successfully engaging students towards learning complex theoretical, numerical, and practical skills.

Harmonic drives are profusely used in aerospace mainly because of their compactness and large reduction ratio. However, their use in cryogenic environments is still a challenge. Lubrication and fatigue are non-trivial issues under these conditions. The objective of the Magnetic-Superconductor Cryogenic Non-contact Harmonic Drive (MAGDRIVE) project, funded by the EU Space FP7, is to design, build, and test a new concept of MAGDRIVE. Non-contact interactions among magnets, soft magnetic materials, and superconductors are efficiently used to provide a high reduction ratio gear that smoothly and naturally operates at cryogenic environments. The limiting elements of conventional harmonic drives (teeth, flexspline, and ball bearings) are substituted by contactless mechanical components (magnetic gear and superconducting magnetic bearings). The absence of contact between moving parts prevents wear, lubricants are no longer required, and the operational lifetime is greatly increased. This is the first mechanical reducer in mechanical engineering history without any contact between moving parts. In this paper, the test results of a −1:20 inverse reduction ratio MAGDRIVE prototype are reported. In these tests, successful operation at 40 K and 10−3 Pa was demonstrated for more than 1.5 million input cycles. A maximum torque of 3 N·m and an efficiency of 80% were demonstrated. The maximum tested input speed was 3000 rpm, six times the previous existing record for harmonic drives at cryogenic temperatures.

This Special Issue is aimed to promote and circulate recent developments and achievements in the field of Mechanism and Machine Science coming from the Italian community with international collaborations and ranging from theoretical contributions to experimental and practical applications [...]

This paper presents a semi-automated design algorithm for computing straight bevel gear involute profiles. The proposed formulation is based on the Tredgold approximation method. It allows the design of a pair of bevel gears with any desired number of teeth and relative axes inclination angles by implementing additive manufacturing technology. A specific case study is discussed to calculate the profiles of two straight bevel gears of a biomedical application. Namely, this paper illustrates the design of the bevel gears for a new laparoscopic robotic system, EasyLap, under development with a grant from POR Calabria 2014−2020 Fesr-Fse. A meshing analysis is carried out to identify potential design errors. Moreover, finite element-based tooth contact analysis is fulfilled for determining the vibrational performances of the conjugate tooth profiles throughout a whole meshing cycle. Simulation results and a built prototype are reported to show the engineering feasibility and effectiveness of the proposed design approach.

This paper presents a novel exoskeleton robot that can be used at home to rehabilitate the index fingers of stroke-affected patients. This exoskeleton is designed as a one-degree-of-freedom four-bar mechanism able to guide the human index finger to perform a finger curl exercise motion. The proposed device is the only lateral, stand-alone mechanism built to date that can carry the weight of the human hand, thus making the user free from wearing it. The design starts by tracing the trajectory of the index finger using 'Angulus' software. 'SALAR Mechanism Synthesizer' software is used for dimensional synthesis of the four-bar mechanism. Using additive manufacturing technology, a prototype of the proposed device is developed. Static force analysis is performed to select the most appropriate actuator for producing the required torque to manipulate the fingers effectively. The kinematics of the index finger while performing a finger curl exercise is obtained. The proposed linkage mechanism can drive the index fingers of both hands. Simulation and experimental results proved the feasibility and effectiveness of the proposed design to be used for index finger rehabilitation for a wide range of users and applications by making simple minor alterations in the design. Also, a scheme for when the device can be used for rehabilitating the middle finger together with the index finger when performing flexion and extension motions is discussed. [ABSTRACT FROM AUTHOR]

Various conditions, including traffic accidents, sports injuries, and neurological disorders, can impair human wrist movements, underscoring the importance of effective rehabilitation methods. Robotic devices play a crucial role in this regard, particularly in wrist rehabilitation, given the complexity of the human wrist joint, which encompasses three degrees of freedom: flexion/extension, pronation/supination, and radial/ulnar deviation. This paper provides a comprehensive review of wrist rehabilitation devices, employing a methodological approach based on primary articles sourced from PubMed, ScienceDirect, Scopus, and IEEE, using the keywords "wrist rehabilitation robot" from 2007 onwards. The findings highlight a diverse array of wrist rehabilitation devices, systematically organized in a tabular format for enhanced comprehension. Serving as a valuable resource for researchers, this paper enables comparative analyses of robotic wrist rehabilitation devices across various attributes, offering insights into future advancements. Particularly noteworthy is the integration of serious games with simplified wrist rehabilitation devices, signaling a promising avenue for enhancing rehabilitation outcomes. These insights lay the groundwork for the development of new robotic wrist rehabilitation devices or to make improvements to existing prototypes incorporating a forward-looking approach to improve rehabilitation outcomes. [ABSTRACT FROM AUTHOR]

Domestic chimney cleaning is still mostly a manual procedure which can be overly complex, dangerous, and expansive. This paper describes the design of a novel robotic device for chimney cleaning that aims to provide a valuable alternative solution to the traditional manual techniques with user-friendly and low-cost features. The proposed device enables a significant reduction in operator risks, including roof falling and soot dust contact. The paper's content describes, in detail, the design process, including a definition of the main design requirements and steps towards the manufacturing of a preliminary prototype. Moreover, a preliminary validation is described through laboratory tests to demonstrate the engineering feasibility and effectiveness of the proposed design solution for the intended semi-autonomous chimney-cleaning application. [ABSTRACT FROM AUTHOR]

This article presents a model of a novel 4-DOF kinematically redundant planar parallel grasping manipulator. As distinct from the traditional 4-DOF manipulator, the proposed design includes an extensible platform, which provides kinematic redundancy. This constructive feature is used for grasping. The article discusses the inverse and forward kinematics of the proposed manipulator. The inverse kinematics algorithm provides the analytical relations between the platform coordinates and the driven (controlled) coordinates. The forward kinematics algorithm allows defining different assembly modes of the manipulator. Both algorithms are demonstrated using numerical examples. The article discusses different designs of the manipulator in which its links are placed in one, two, or three layers. Based on these designs, we performed their workspace analyses. [ABSTRACT FROM AUTHOR]

I Machines i was able to uphold its high standards for published papers due to the outstanding efforts of our reviewers. [Extracted from the article]

This paper analyses some effective strategies proposed in the last few years to tackle contact mechanics problems involving rough interfaces. In particular, we present Boundary Element Methods capable of solving the contact with great accuracy and, at the same time, with a marked computational efficiency. Particular attention is paid to non-linearly elastic constitutive relations and, specifically, to a linearly viscoelastic rheology. Possible implications deal with all the tribological mechanical systems, where contact interactions are present, including, e.g., seals, bearings and dampers. [ABSTRACT FROM AUTHOR]

Robot rehabilitation devices are attracting significant research interest, aiming at developing viable solutions for increasing the patient's quality of life and enhancing clinician's therapies. This paper outlines the design and implementation of a low-cost robotic system that can assist finger motion rehabilitation by controlling and adapting both the position and velocity of fingers to the users′ needs. The proposed device consists of four slider-crank mechanisms. Each slider-crank is fixed and moves one finger (from the index to the little finger). The finger motion is adjusted through the regulation of a single link length of the mechanism. The trajectory that is generated corresponds to the natural flexion and extension trajectory of each finger. The functionality of this mechanism is validated by experimental image processing. Experimental validation is performed through tests on healthy subjects to demonstrate the feasibility and user-friendliness of the proposed solution. [ABSTRACT FROM AUTHOR]

The mechanism is designed as result of a specific functional synthesis and the movement of the conveyor blades is driven by the kinematics of the four-bar linkage with a fairly simple control system. A design of a planar parallel mechanism installed on a fast-operating automatic machine is discussed in [[7]], where the mechanism design is optimized in order to reduce the observed vibrations. This Special Issue is aimed to promote and circulate recent developments and achievements in the field of Mechanism and Machine Science coming from the Italian community with international collaborations and ranging from theoretical contributions to experimental and practical applications. [Extracted from the article]

This Special Issue is aimed to promote and circulate recent developments and achievements in the field of Mechanism and Machine Science coming from the Italian community with international collaborations and ranging from theoretical contributions to experimental and practical applications. IFToMM Italy is one of the founding member organizations of IFToMM, the International Federation for the Promotion of Mechanism and Machine Sciences in 1969. Since then, the member organization IFToMM Italy has been active with contributions at national and international levels, and in 2014 IFToMM Italy was legally established as the Italian IFToMM society. [Extracted from the article]

Underactuated robotic grippers have the advantage of lower cost, simpler control, and higher safety over the fully actuated grippers. In this study, an underactuated robotic finger is presented. The design issues that should be considered for stable grasping are discussed in detail. This robotic finger is applied to design a two-fingered underactuated gripper. Firstly, a new three-DOF linkage-driven robotic finger that combines a five-bar mechanism and a double parallelogram is presented. This special architecture allows us to put all of the required actuators into the palm. By adding a torsion spring and a mechanical stopper at a passive joint, this underactuated finger mechanism can be used to perform parallel grasping, shape-adaptive grasping, and environmental contact-based grasp. Secondly, the dynamic model of this robotic finger is developed to investigate how to select an appropriate torsion spring. The dynamic simulation is performed with a multi-body dynamic simulator to verify our proposed approach. Moreover, static grasp models of both two-point and three-point contact grasps are investigated. Finally, different types of grasping modes are verified experimentally with a two-fingered underactuated robotic gripper. [ABSTRACT FROM AUTHOR]

Expert systems are a form of highly understandable artificial intelligence that allow humans to trace the decision-making processes that are used. While they are typically software implemented and use an iterative algorithm for rule-fact network processing, this is not the only possible implementation approach. This paper implements and evaluates the use of hardware-based expert systems. It shows that they work accurately and can be developed to parallel software implementations. It also compares the processing speed of software and hardware-based expert systems, showing that hardware-based systems typically operate two orders of magnitude faster than the software ones. The potential applications that hardware-based expert systems can be used for and the capabilities that they can provide are discussed. [ABSTRACT FROM AUTHOR]

Within the Industry 4.0 revolution, manufacturing enterprises are transforming to intelligent enterprises constituted by Smart Manufacturing Systems (SMSs). A key capability of SMSs is the ability to connect and communicate with each other through Industrial Internet of Things technologies, and protocols with standard syntax and semantics. In this context, the GEMMA-GRAFCET Methodology (GG-Methodology) provides a standard approach and vocabulary for the management of the Operational Modes (OMs) of SMSs through the automation software, bringing a common understanding of the exchanged data. Considering the lack of tools to implement the methodology, this work introduces an online tool based on Model-Driven Engineering–GEMMA-GRAFCET Generator (GG-Generator)–to specify and generate PLCopen XML code compliant with the GG-Methodology. The proposed GG-Generator is applied to a case study and validated using Virtual Commissioning and Dynamic Software Testing. Due to the consistency obtained between the GG-Methodology and the generated PLC code, the GG-Generator is expected to support the adoption of the methodology, thus contributing to the interoperability of SMSs through the standardization of the automation software for the management of their OMs. [ABSTRACT FROM AUTHOR]

The study provides a solution to a dimensional synthesis problem for a hexapod-type reconfigurable parallel mechanism, which can change its configuration to realize different trajectories of its output link while having a single drive. The work presents an original procedure to find the dimensions of some mechanism's links and their initial configuration to reproduce these trajectories. After describing the mechanism, the paper examines kinematic relations representing the basis for the subsequent synthesis algorithm. Next, the obtained expressions are extended and provide a system of equations to be solved. The structure of this equation system allows it to be solved effectively by numerical methods, which is demonstrated with an example. The proposed algorithm of dimensional synthesis does not require solving the optimization problems, in contrast to the familiar methods of dimensional synthesis of parallel mechanisms. Further, the suggested approach to the synthesis problem allows finding solution in a fast and computationally efficient manner. [ABSTRACT FROM AUTHOR]

This paper addresses the design of a novel mechatronic device for saffron harvesting. The main proposed challenge consists of proposing a new paradigm for semi-automatic harvesting of saffron flowers. The proposed novel solution is designed for being easily portable with user-friendly and cost-oriented features and with a fully electric battery-powered actuation. A preliminary concept design has been proposed as based on a specific novel cam mechanism in combination with an elastic spring for fulfilling the detachment of the flowers from their stems. Numerical calculations and simulations have been carried out to complete the full design of a proof-of-concept prototype. Preliminary experimental tests have been carried out to demonstrate the engineering feasibility and effectiveness of the proposed design solutions, whose concept has been submitted for patenting. [ABSTRACT FROM AUTHOR]

Since centrifugal pumps consume a mammoth amount of energy in various industrial applications, their design and optimization are highly relevant to saving maximum energy and increasing the system's efficiency. In the current investigation, a centrifugal pump has been designed and optimized. The study has been carried out for the specific application of transportation of slurry at a flow rate of 120 m3/hr to a head of 20 m. For the optimization process, a multi-objective genetic algorithm (MOGA) and response surface methodology (RSM) have been employed. The process is based on the mean line design of the pump. It utilizes six geometric parameters as design variables, i.e., number of vanes, inlet beta shroud, exit beta shroud, hub inlet blade draft, Rake angle, and the impeller's rotational speed. The objective functions employed are pump power, hydraulic efficiency, volumetric efficiency, and pump efficiency. In this reference, five different software packages, i.e., ANSYS Vista, ANSYS DesignModeler, response surface optimization software, and ANSYS CFX, were coupled to achieve the optimized design of the pump geometry. Characteristic maps were generated using simulations conducted for 45 points. Additionally, erosion rate was predicted using 3-D numerical simulations under various conditions. Finally, the transient behavior of the pump, being the highlight of the study, was evaluated. Results suggest that the maximum fluctuation in the local pressure and stresses on the cases correspond to a phase angle of 0°–30° of the casing that in turn corresponds to the maximum erosion rates in the region. [ABSTRACT FROM AUTHOR]

This research focuses on the minimum process of classifying three upper arm movements (elbow extension, shoulder extension, combined shoulder and elbow extension) of humans with three electromyography (EMG) signals, to control a 2-degrees of freedom (DoF) robotic arm. The proposed minimum process consists of four parts: time divisions of data, Teager–Kaiser energy operator (TKEO), the conventional EMG feature extraction (i.e., the mean absolute value (MAV), zero crossings (ZC), slope-sign changes (SSC), and waveform length (WL)), and eight major machine learning models (i.e., decision tree (medium), decision tree (fine), k-Nearest Neighbor (KNN) (weighted KNN, KNN (fine), Support Vector Machine (SVM) (cubic and fine Gaussian SVM), Ensemble (bagged trees and subspace KNN). Then, we compare and investigate 48 classification models (i.e., 47 models are proposed, and 1 model is the conventional) based on five healthy subjects. The results showed that all the classification models achieved accuracies ranging between 74–98%, and the processing speed is below 40 ms and indicated acceptable controller delay for robotic arm control. Moreover, we confirmed that the classification model with no time division, with TKEO, and with ensemble (subspace KNN) had the best performance in accuracy rates at 96.67, recall rates at 99.66, and precision rates at 96.99. In short, the combination of the proposed TKEO and ensemble (subspace KNN) plays an important role to achieve the EMG classification. [ABSTRACT FROM AUTHOR]

Assessing passenger cars' dynamic performance is a critical aspect for car industries, due to its impact on the overall vehicle safety evaluation and the subjective nature of the involved handling and comfort metrics. Accordingly, ISO standards, such as ISO 4138 and ISO 3888, define several specific driving tests to assess vehicle dynamics performance objectively. Consequently, proper evaluation of the dynamic behaviour requires measuring several physical quantities, including accelerations, speed, and linear and angular displacements obtained after instrumenting a vehicle with multiple sensors. This experimental activity is highly demanding in terms of hardware costs, and it is also significantly time-consuming. Several approaches can be considered for reducing vehicle development time. In particular, simulation software can be exploited to predict the approximate behaviour of a vehicle using virtual scenarios. Moreover, motion platforms and detail-scalable numerical vehicle models are widely implemented for the purpose. This paper focuses on a customized simulation environment developed in C++, which exploits the advantages of object-oriented programming. The presented framework strives to perform concurrent simulations of vehicles with different characteristics such as mass, tyres, engine, suspension, and transmission systems. Within the proposed simulation framework, we adopted a hierarchical and modular representation. Vehicles are modelled by a 14 degree-of-freedom (DOF) full-vehicle model, capable of capturing the dynamics and complemented by a set of scalable-detail models for the remaining sub-systems such as tyre, engine, and steering system. Furthermore, this paper proposes the usage of autonomous virtual drivers for a more objective evaluation of vehicle dynamic performances. Moreover, to further evaluate our simulator architecture's efficiency and assess the achieved level of concurrency, we designed a benchmark able to analyse the scaling of the performances with respect to the number of different vehicles during the same simulation. Finally, the paper reports the proposed simulation environment's scalability resulting from a set of different and varying driving scenarios. [ABSTRACT FROM AUTHOR]

This paper outlines the design process for achieving a novel four-legged robot for exploration and rescue tasks. This application is also intended as an educational mean for masters' students aiming at gaining skills in designing and operating a complex mechatronic system. The design process starts with an analysis of the desired locomotion and definition of the main requirements and constraints. Then, the paper focuses on the key design challenges, including analytical/numerical modeling and simulations of kinematic and dynamic performances. Specific attention is addressed to the manufacturing of a proof-of-concept prototype, including mechanical and control hardware, as well as the development of the needed software for an autonomous operation. Preliminary tests were carried out, to validate the main features required by the final prototype, to prove its feasibility and user-friendliness, as well as the effectiveness of this complex mechatronic design task for successfully engaging students towards learning complex theoretical, numerical, and practical skills. [ABSTRACT FROM AUTHOR]

This paper presents a semi-automated design algorithm for computing straight bevel gear involute profiles. The proposed formulation is based on the Tredgold approximation method. It allows the design of a pair of bevel gears with any desired number of teeth and relative axes inclination angles by implementing additive manufacturing technology. A specific case study is discussed to calculate the profiles of two straight bevel gears of a biomedical application. Namely, this paper illustrates the design of the bevel gears for a new laparoscopic robotic system, EasyLap, under development with a grant from POR Calabria 2014–2020 Fesr-Fse. A meshing analysis is carried out to identify potential design errors. Moreover, finite element-based tooth contact analysis is fulfilled for determining the vibrational performances of the conjugate tooth profiles throughout a whole meshing cycle. Simulation results and a built prototype are reported to show the engineering feasibility and effectiveness of the proposed design approach. [ABSTRACT FROM AUTHOR]