Search

The hydration and thermal response kinetics of the cross-linked thermoresponsive copolymer poly((diethylene glycol monomethyl ether methacrylate)-co-poly(ethylene glycol) methyl ether methacrylate), abbreviated as P(MEO2MA-co-OEGMA300), thin film on a hydrophobic polyacrylonitrile (PAN) substrate coating, which resembles a synthetic fabric, is probed by in situ neutron reflectivity (NR). The PAN and monomer (MEO2MA and OEGMA300) solutions are sequentially spin-coated onto a silicon (Si) substrate. Afterward, plasma treatment is applied to realize the cross-linking of PAN and monomers. The as-prepared cross-linked P(MEO2MA-co-OEGMA300) film on the hydrophobic PAN substrate coating presents a two-layer structure: a substrate-near layer, which is a mixture of PAN and P(MEO2MA-co-OEGMA300), and a main layer, which is composed of pure hydrophilic P(MEO2MA-co-OEGMA300). During hydration in D2O vapor atmosphere, the hydrophobic PAN component prevents the formation of D2O enrichment in the substrate-near layer. However, an additional vapor-near layer is observed on top of the main layer, which is enriched with D2O. The hydration process is constrained by the cross-linking points in the film, inducing the relaxation time to be longer than that in a spin-coated P(MEO2MA-co-OEGMA300) film. Because the as-prepared cross-linked film presents a transition temperature (TT) at 38 °C, the hydrated film switches to the collapsed state when the temperature is increased from 23 to 50 °C. The response to a thermal stimulus is also slower due to the existence of the internal cross-linking points as compared to the spin-coated film. Interestingly, no reswelling is observed at the end of the thermal stimulus, which can be also attributed to the presence of internal cross-linking points.

The impact of thermal history on the kinetic response of thin thermoresponsive diblock copolymer poly(diethylene glycol monomethyl ether methacrylate)-block-poly(poly(ethylene glycol) methyl ether methacrylate), abbreviated as PMEO2MA-b-POEGMA300, films is investigated by in situ neutron reflectivity. The PMEO2MA and POEGMA300 blocks are both thermoresponsive polymers with a lower critical solution temperature. Their transition temperatures (TTs) are around 25 °C (TT1, PMEO2MA) and 60 °C (TT2, POEGMA300). Thus, by applying different temperature protocols (20 to 60 or 20 to 40 to 60 °C), the PMEO2MA-b-POEGMA300 thin films experience different thermal histories: the first protocol directly switches from a swollen to a collapsed state, whereas the second one switches first from a swollen to a semicollapsed and finally to a collapsed state. Although the applied thermal histories differ, the response and final state of the collapsed films are very close to each other. After the thermal stimulus, both films present a complicated response composed of an initial shrinkage, followed by a rearrangement. Interestingly, a subsequent reswelling of the collapsed film is only observed in the case of having applied a thermal stimulus of 20 to 40 °C. The normalized film thickness and the D2O amount of each layer in the PMEO2MA-b-POEGMA300 films are consistent at the end of the two different thermal stimuli. Hence, it can be concluded that the thermal history does not influence the final state of the PMEO2MA-b-POEGMA300 films upon heating. Based on this property, these thin films are especially suitable for the temperature switches on the nanoscale, which may experience different thermal histories.

The linear shrinkage behavior in thermoresponsive diblock copolymer films and its potential application in temperature sensors are investigated. The copolymer is composed of two thermoresponsive blocks with different transition temperatures (TTs): di(ethylene glycol) methyl ether methacrylate (MEO2MA; TT1 = 25 °C) and poly(ethylene glycol) methyl ether methacrylate (OEGMA300; TT2 = 60 °C) with a molar ratio of 1:1. Aqueous solutions of PMEO2MA-b-POEGMA300 show a three-stage transition upon heating as seen with optical transmittance and small-angle X-ray scattering: dissolution (T TT2). Due to the restrictions in the polymer chain arrangement introduced by the solid Si substrate, spin-coated PMEO2MA-b-POEGMA300 films exhibit an entirely different internal structure and transition behavior. Neutron reflectivity shows the absence of an ordered structure normal to the Si substrate in as-prepared PMEO2MA-b-POEGMA300 films. After exposure to D2O vapor for 3 h and then increasing the temperature above its TT1 and TT2, the ordered structure is still not observed. Only a D2O enrichment layer is formed close to the hydrophilic Si substrate. Such PMEO2MA-b-POEGMA300 films show a linear shrinkage between TT1 and TT2 in a D2O vapor atmosphere. This special behavior can be attributed to the synergistic effect between the restrained collapse of the PMEO2MA blocks by the still swollen POEGMA300 blocks and the impedance of chain arrangement by the Si substrate. Based on this unique behavior, spin-coated PMEO2MA-b-POEGMA300 films are further prepared into a temperature sensor by implementing Ag electrodes. Its resistance decreases linearly with temperature between TT1 and TT2.

Alkoxysilane having various functional headgroups (amino and mercapto) and morphologies was deposited by supercritical CO(2) onto a porous dielectric material to replace the metallic barrier used in semiconductor devices. These organic layers were successfully coated with Cu. The morphologies of the stacks were investigated by X-ray and neutron reflectometry and atomic force microscopy. Whereas PVD Cu deposition is not adapted to silanized dielectric material with mercapto and aminopropyltrimethoxysilane but acceptable with aminoethylaminopropyltrimethoxysilane, the MOCVD process is more interesting. XRR and NR data clearly indicate that silane layers remain intact after copper deposition and, depending on the Cu immobilization capability of the chemical function of the silane and its orientation into the layer, the Cu film morphologies are different. Dense, thin films having small Cu grains were obtained with an aminoethylaminopropyltrimethoxysilane layer, and thick films having a low density and large Cu grains were obtained with an aminopropyltrimethoxysilane layer. Nucleation and growth mechanisms are discussed.

Time-resolved specular neutron reflectivity measurements are presented and interpreted for electroactive polyvinylferrocene (PVF) films subject to potentiodynamic electrochemical control. New data acquisition methodology allows an effective measurement time scale on the order of seconds, which is an improvement over conventional methodology by 2 to 3 orders of magnitude. Reflectivity profiles were obtained for PVF films exposed to aqueous 0.1 M NaClO4 in which PVF films are thermodynamically permselective, with contrast variation via H2O and D2O. Irrespective of any model, the raw profiles show chemically reversible film "breathing" due to redox-driven solvent entry and exit during polymer oxidation and reduction, respectively. Modeling reveals three compositionally distinct regions within the polymer film: interfacial regions at the electrode and solution interfaces and a "bulk" interior. The new methodology, supported by simultaneous in situ visible transmission spectroscopy, reveals an unprecedented level of insight into the temporal and spatial mechanistic details of film solvation changes, including a two-stage (de)solvation mechanism for redox switching, differences in interior (in)homogeneity for reduced and oxidized films, and permselectivity failure under dynamic electrochemical conditions for the reduced (but not oxidized) state, in contrast to static conditions that allow permselectivity for both states.

The effect of the addition of 10 mol % cholesterol to 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) floating bilayers has been investigated by means of neutron reflectivity measurements. The large swelling of the water layer between the two bilayers found in pure phosphocholine systems around the lipid main phase transition is greatly reduced in the 9:1 DPPC:cholesterol mixture. The analysis of the structure of the bilayer reveals that in the gel phase cholesterol induces the presence of a high rms roughness that disappears in the fluid phase.