Search

Purpose: The use of a mesh with good biocompatibility properties is of decisive importance for the avoidance of recurrences and chronic pain in endoscopic hernia repair surgery. As we know from numerous experiments and clinical experience, large-pore, lightweight polypropylene meshes possess the best biocompatibility. However, large-pore meshes of different polymers may be used as well and might be an alternative solution., Methods: Utilizing a totally extraperitoneal technique in an established animal model, 20 domestic pigs were implanted with either a lightweight large-pore polypropylene (PP) mesh (Optilene® LP) or a medium-weight large-pore knitted polytetrafluorethylene (PTFE) mesh (GORE® INFINIT® mesh). After 94 days, the pigs were sacrificed and postmortem diagnostic laparoscopy was performed, followed by explantation of the specimens for macroscopic, histological and immunohistochemical evaluation., Results: The mean mesh shrinkage rate was 14.2% for Optilene® LP vs. 24.7% for INFINIT® mesh (p = 0.017). The partial volume of the inflammatory cells was 11.2% for Optilene® LP vs. 13.9% for INFINIT (n.s.). CD68 was significantly higher for INFINIT (11.8% vs. 5.6%, p = 0.007). The markers of cell turnover, namely Ki67 and the apoptotic index, were comparable at 6.4% vs. 12.4% (n.s.) and 1.6% vs. 2.0% (n.s.). In the extracellular matrix, TGF-β was 35.4% for Optilene® LP and 31.0% for INFINIT® (n.s.). Collagen I (pos/300 μm) deposits were 117.8 and 114.9, respectively., Conclusion: In our experimental examinations, Optilene® LP and INFINIT® showed a comparable biocompatibility in terms of chronic inflammatory reaction; however, the shrinkage rate was significantly higher for INFINIT® after 3 months. The higher shrinkage rate of INFINIT® should be taken into account when choosing the mesh size for an adequate hernia overlap.

Background: Because of its hemostatic and adhesive properties, fibrin glue has been used in many areas of surgical treatment in recent years. One example is hernia repair, where fibrin gluing has become increasingly established as an alternative method for mesh fixation. Clinically, fixation with fibrin glue shows a reduced postoperative complication rate compared to other fixation methods (staples, sutures), particularly with regard to pain., Materials and Methods: Six different lightweight meshes were tested: TiMesh light, TiMesh extralight, Parietene light, Ultrapro, Optilene LP, and BARD Soft Mesh. Two millimeters Tissucol was used for fixation. Five meshes from each group were tested on muscular tissue with and without fibrin glue. The defined defect was 4.5 cm in diameter. The biomechanical measurements were taken in a standardized way using a materials testing machine. The minimum fixation strength required was 32 N, calculated from a corresponding model., Results: The fixation strength measurements without fibrin glue gave a mean value for all 30 meshes of 2.98 N with a SD of 0.92 N. This was far below the 32 N required. With fibrin glue, the mean of all the measurements (30 meshes) was 61.86 +/- 23.0 N (min 34.9 N, max 97.3 N). The lowest value was recorded for Ultrapro (34.9 +/- 12.5 N). All the other meshes had a significantly higher fixation strength when fixed with fibrin glue than Ultrapro (p = 0.001). The best results were found for Optilene LP, and this was significantly better than all the other meshes (97.3 +/- 8.9 N; p < 0.001)., Conclusion: Given the adequate stability and superior biocompatibility of lightweight large pore monofilament polypropylene meshes, heavyweight polypropylene meshes should no longer be used. It is possible to achieve adequate fixation of the meshes using fibrin glue. However, careful consideration should be given to the particular structure of the mesh in each case. Not every mesh is equally suitable for this purpose.

Background: The occurrence of incisional hernias after various types of abdominal procedures and incisions continues to be a problem. A number of studies conducted for diverse risk groups have identified a beneficial role for the prophylactic use of mesh augmentation. To what extent this affects the stability of a suture was tested in our biomechanical model., Materials and Methods: To that effect, we compared three groups, carrying out six measurements in each case: (1) single suture in a muscle specimen, (2) suture and additional reinforcement with fibrin glue, and (3) suture and additional reinforcement with a mesh fixed with fibrin glue (Tissucol, Tisseel; with an overlap of 2 cm to all sides)., Results: The single suture conferred a tensile strength, which in our model, was just above the prescribed maximum abdominal pressure of 32 N (37.3 N). The additional use of fibrin glue did not have any significant impact on this result (41.8 N). Only through mesh augmentation with fibrin glue was it possible to achieve a significantly greater tensile strength (64.5 N, p = 0.003)., Conclusions: The prophylactic use of meshes for stabilization of laparotomy closures appears to be effective. Adequate mesh fixation can be achieved with fibrin glue alone. Further experimental studies and in particular randomized clinical trials are needed to demonstrate proof of the long-term advantages of mesh augmentation in risk groups.

Background and Aims: An anatomical and physiological reconstruction of the abdominal wall after incisional hernia must include reconstruction of the linea alba to restore the physiological function of the vertebral column and respiration. Against this background, a special reconstruction method employing a mesh, which is performed in our department, is presented., Materials and Methods: In the period between 1 January 2000 and 1 June 2004, a total of 106 patients with incisional hernias after median laparotomy of the upper and lower abdomen were operated on in our department using this tension-free technique with one or two meshes. We have now evaluated the outcomes after a median follow-up of 25.8 months (6.5-53.3)., Results: In one patient (0.9%), the peritoneal sac was inadvertently opened, resulting in injury to the small bowel serosa. Surgical complications were observed in 14 patients (13.2%) after dynamic patchplasty. In seven cases (6.6%), wound healing disorders were seen. Overall, 6 out of 106 (5.5%) patients needed revision surgery. In the follow-up period, 92 patients (follow-up 86.8%) could be contacted and re-examined. Four patients (3.8%) had died. There were four recurrences (4.3%), which had already been repaired, and one chronic seroma, which caused no symptoms and which was detected in ultrasound and computed tomography., Conclusion: In view of the possibility of achieving physiological reconstruction and in the light of a tolerable morbidity rate, dynamic patchplasty is a suitable method for incisional hernias. Long-term results hold out promise of an acceptable low recurrence rate.