Search

A low cost alkaline catalyst of dolomite (CaMg(CO3)2) was used to stabilize acacia sawdust bio-oil mixed with methanol. The upgrading efficiency was evaluated in terms of the total acid number (TAN) and viscosity. A change in the dolomite calcination temperature from 700 to 900 °C led to a significant change in the TAN and viscosity of the methanol-added bio-oil. Dolomite activated at higher temperatures had larger amounts of active CaO and MgO species due to the enhanced decarboxylation of calcium and magnesium carbonates. An increase in the dolomite content (1-5 wt%) decreased the TAN value of bio-oil remarkably. A thermal aging test of the methanol-added bio-oil upgraded using dolomite (calcined at 900 °C) at 50 °C for 24 h was carried out by storing the bio-oil at 80 °C for one week. Although the TAN value increased after the aging process, it was still lower than the TAN of raw bio-oil. In addition, increasing the methanol content (10-30 wt%) decreased the TAN and viscosity of the bio-oil significantly.

Tungstated zirconia (WO3/ZrO2 with WO3 loadings of 9.9 (WZ9.9), 15.5 (WZ15.5), and 15.7 wt% (WZ15.7)) and Amberlyst (15, 35, 36, 39 and 45) catalysts were employed to upgrade pyrolysis bio-oil of acacia sawdust through an esterification reaction using methanol at atmospheric pressure and room temperature or 80 °C. The upgrading efficiency was evaluated by measuring the total acid number (TAN) and viscosity. The viscosity and TAN of the resulting upgraded bio-oil were found to be dependent on the calcination temperature of the WO3/ZrO2 catalysts. At room temperature, the largest decrease in viscosity and TAN of the bio-oil and methanol mixture was obtained using WZ9.9 tungstated zirconia calcined at 900 °C. An increase in reaction temperature to 80 °C improved the flowability and TAN of the methanol-added bio-oil using WZ9.9 activated at 900 °C. The product distribution of the bio-oil upgraded using methanol revealed esterification to be the dominant reaction pathway under the reaction conditions of this study. When the ether extracted bio-oil was upgraded at 80 °C using methanol over catalysts, the Amberlyst catalysts were found more effective than tungstated zirconia catalysts in enhancing the esterification reaction and reducing TAN.

A high performance thermostable α-amylase at low pH values has been synthesized. Sugarcane bagasse was hydrolyzed in a dilute acid solution and utilized as carbon source for the growth of Aspergillus niger strain NCIM 548. Glucose, xylose and arabinose with the ratio of 1. 0: 0. 9: 0. 3 (w/w/w) were detected in the hydrolyzate by HPLC analysis. Optimization of the fermentation conditions for α-amylase production was performed by varying four influential parameters such as Sugarcane bagasse hydrolyzate (SBH), NH4Cl, pH and incubation time using a central composite design (CCD) under response surface methodology (RSM). The optimum values of SBH, NH4Cl, pH and incubation time were 20. 49, 2. 34 g/l, 5. 65 and 76. 67 h, respectively. The acido-thermophilic enzyme showed maximum stability at 70°C and pH value of 4. The rate constant, Km and maximum reaction rate, Vmax were 18. 79 g/l and 15. 85 g/l·min, respectively.