Search

Abstract: In order to determine how “tight” a total knee prosthesis should be implanted, it is important to know the amount of laxity in a healthy knee. The objective of this study was to determine knee laxity in extension and flexion in healthy, non-arthritic knees of subjects similar in age to patients undergoing a total knee arthroplasty and to provide guidelines for the orthopaedic surgeon in his attempt to restore the stability of an osteoarthritic knee to normal. Thirty healthy subjects (15 male, 15 female), mean age 62 (SD 6.4) years, were included in the study. For each subject one, randomly selected, knee was stressed in extension and in 70° flexion (15 Nm). Varus and valgus laxity were measured on radiographs. The passive range of motion and active flexion was assessed. Mean valgus laxity in extension was 2.3° (SD 0.9, range 0.2°–4.1°). In extension mean varus laxity was 2.8° (SD 1.3, range 0.6°–5.4°). In flexion, mean valgus laxity was 2.5° (SD 1.5, range 0.0°–6.0°) and mean varus laxity was 3.1° (SD 2.0, range 0.1°–7.0°). Varus and valgus knee laxity in extension and in flexion were comparable. This study shows that the normal knee in this age group has an inherent degree of varus–valgus laxity. Whether the results of the present study can be used to optimise the total knee arthroplasty implantation technique requires further investigation. [Copyright &y& Elsevier]

Background: Some follow-up studies of high flexion total knee arthoplasties report disturbingly high incidences of femoral component loosening. Femoral implant fixation is dependant on two interfaces: the cement-implant and the cement-bone interface. The present finite-element model (FEM) is the first to analyse both the cement-implant interface and cement-bone interface. The cement-bone interface is divided into cement-cancellous and cement-cortical bone interfaces, each having their own strength values. The research questions were: (1) which of the two interfaces is more prone to failure? and (2) what is the effect of different surgical preparation techniques for cortical bone on the risk of early failure.fi Methods: FEM was used in which the posterior-stabilized PFC Sigma RP-F (DePuy) TKA components were incorporated. A full weight-bearing squatting cycle was simulated (ROM = 50°-155°). An interface failure index (FI) was calculated for both interfaces. Results: The cement-bone interface is more prone to failure than the cement implant interface. When drilling holes through the cortex behind the anterior flange instead of unprepared cortical bone, the area prone to early interface failure can be reduced from 31.3% to 2.6%. Conclusion: The results clearly demonstrate high risk of early failure at the cement-bone interface. This risk can be reduced by some simple preparation techniques of the cortex behind the anterior flange. Clinical relevance: High-flexion TKA is currently being introduced. Some reports show high failure rates. FEM can be helpful in understanding failure of implants. [ABSTRACT FROM AUTHOR]

Introduction: Recent clinical studies show an increased risk of femoral loosening in high-flexion TKA. Loosening seems to occur behind the anterior flange, which is covering both cancellous bone and cortical bone. It is important to optimize the interface strength between cement and both bone types to increase femoral component fixation. This study was performed to determine the cement-cortical bone interface strength for different preparation techniques. Material and methods: A pure tensile and shear force was applied to interface specimens. The cortical surface area was prepared in three different ways: (1) Unprepared cortical bone with periosteum; (2) Periosteum removed and cortical bone roughened with a rasp; (3) Periosteum removed and three 03.2 mm holes drilled through the cortex. A reference group was added with a cancellous bone surface. Results: The interface tensile strength of Group 1 was 0.06 MPa and the shear strength was 0.05 MPa. For Group 2, respectively 0.22 MPa and 1.12 MPa. For Group 3, respectively 1.15 MPa and 1.77 MPa. For cancellous bone a tensile strength of 1.79 MPa and a shear strength of 3.85 MPa were measured. Conclusion: The strength of the cement-cancellous bone interface is superior to the cement-cortical bone interface. The preferred preparation technique of the cortical bone is to remove all the periosteum and drill holes through the cortex within the footprint of the anterior flange, to prevent cortical weakening. Clinical relevance: Ultimately, the proposed preparation technique will lead to longer implant survival, particularly for prostheses which are used in the high-flexion range. [ABSTRACT FROM AUTHOR]

Abstract: Total knee arthroplasty (TKA) is being undertaken in a younger population than before and as a result the functional demands on the knee are likely to be increasing. As a consequence, it is important to define quantitative functional knee tests that can monitor any increase. A valuable functional knee test has to be able to distinguish small differences (selectivity) and has to be independent of pain (content validity). In this study, patient-based questionnaires (WOMAC and Knee Society score) and performance-based tests (sit-to-stand movement, maximal isometric contraction and timed-up-and-go) were used to assess which of these tests are selective and valid to measure knee function. Tests were considered to be selective if they could discriminate between knee patients and healthy control subjects, and to have functional content validity if they were relatively independent of pain. Twenty-eight patients were measured 16 months after surgery and compared to a healthy control group of 31 subjects. The sit-to-stand movement and timed-up-and-go test were both selective and functionally content valid. The timed-up-and-go test can be used for a quick initial assessment of global function and the sit-to-stand movement as a more biomechanical instrument identifying how the knee function of the patient is affected. [Copyright &y& Elsevier]

Background: Meniscal functioning depends on the fixation between the meniscal horns and the surrounding tissues. It is unknown, however, whether the integration between the outer circumference of the medial meniscus and the knee capsule/medial collateral ligament also influences the biomechanical behavior of the meniscus. Therefore, we aimed to determine whether detaching and resuturing the circumferential fixation of the medial meniscus influence its kinematic pattern. Methods: Human cadaveric knee joints were flexed (0°-30°-60°-90°) in a knee loading rig, in neutral orientation and under internal and external tibial torques. Roentgen stereophotogrammetric analysis was used to determine the motion of the meniscus in anteroposterior (AP) and mediolateral (ML) directions. Three fixation conditions were evaluated: (I) intact, (II) detached and (III) resutured. Results: Detaching and resuturing the circumferential fixation did not alter the meniscal motion pattern in either the AP or ML direction. Applying an additional internal tibial torque caused the medial meniscus to move slightly anteriorly, and an external torque caused a little posterior translation with respect to the neutral situation. These patterns did not change when the circumferential fixation condition was altered. Conclusions: This study demonstrated that the motion pattern of the medial meniscus is independent of its fixation to the knee capsule and medial collateral ligament. Clinical relevance: The outcomes of this study can be deployed to design the fixation strategy of a permanent meniscus prosthesis. As peripheral fixation is a complicated step during meniscal replacement, the surgical procedure is considerably simplified when non-resorbable implants do not require circumferential fixation. [ABSTRACT FROM AUTHOR]

Abstract: The aim of this study was to investigate anteroposterior instability in the CKS and the PFC total knee arthroplasty (TKA) designs. Physical examinations, including VAS, IKS and WOMAC were performed in combination with a detailed fluoroscopic measurement technique for three-dimensional kinematic assessment of TKA design function. Anteroposterior instability rated with the IKS was not significantly different (p =0.34), but patients with a CKS design showed more limitations according to the WOMAC joint stiffness total score, and for items regarding higher flexion activities in the WOMAC score for knee disability. Kinematic analyses showed that the CKS design tended to have more anterior sliding of the femur on the tibia during mid- and deep flexion activities. The sliding distance was larger at the medial than at the lateral side. This phenomenon has also been described for posterior cruciate ligament deficient knees. Furthermore, the CKS design showed a significantly lower range of tibial rotation (p <0.05) from maximum extension to maximum flexion during deep knee bend activities. Kinematic differences can be ascribed to posterior cruciate ligament deficiency/laxity or differences in TKA designs. [Copyright &y& Elsevier]

Background: Accurate assessment of knee kinematics is important in the diagnosis and quantification of knee disorders and to determine the effect of orthopaedic interventions. Despite previous studies showing the usefulness of dynamic imaging and providing valuable insights in knee kinematics, dynamic imaging is not widely used in clinics due to a variety of causes. In this study normative knee kinematics of 100 healthy subjects is established using a fully automatic workflow feasible for use in the clinic., Methods: One-hundred volunteers were recruited and a dynamic CT scan was made during a flexion extension movement. Image data was automatically segmented and dynamic and static images were superimposed using image registration. Coordinate systems for the femur, patella and tibia were automatically calculated as well as their dynamic position and orientation., Results: Dynamic CT scans weremade withan effective radiation dose of 0.08 mSv. The median tibial internal rotation was 4° and valgus rotation is 5° at full flexion. Femoral rollback of the lateral condyle was 7 mm versus 2 mm of the medial condyle. The median patella flexion reached 65% of tibiofemoral flexion and the median tilt and rotation were 5° and 0° at full flexion, respectively. The median mediolateral translation of the patella was 3 mm (medially) in the first 30° of flexion., Conclusion: The current study presents TF and PF kinematic data of 97 healthy individuals, providing a unique dataset of normative knee kinematics. The short scanning time, simple motion and, automatic analysis make the methods presented suitable for daily clinical practice., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Author(s). Published by Elsevier B.V. All rights reserved.)

Background: In ACL-reconstructed patients the postoperative knee biomechanics may differ from the intact knee biomechanical behavior which can alter knee kinematics and kinetics, and as a result lead to the progression of knee osteoarthritis. The aim of this study was to demonstrate the potential of finite element models to define the optimal choices in surgical parameters in terms of optimal graft positioning in combination with graft type in order to restore the kinematic and kinetic behavior of the knee as best as possible., Methods: A workflow was proposed based on cadaveric experiments in order to restore the injured knee to a near normal physiological condition. Femoral and tibial graft insertion sites and graft fixation tension were optimized to obtain similar intact knee laxity, for three common single-bundle and one double-bundle reconstructions. To verify the success of the surgery with the variables calculated using the proposed workflow, a full walking cycle was simulated with the intact, ACL-ruptured, optimal ACL-reconstructed and non-optimal reconstructed knees., Results: Our results suggested that for patellar tendon and hamstring tendon grafts, anatomical positioning (fixation force: 40 N), and for quadriceps tendon graft, isometric positioning (fixation tension: 85 N) could recover the intact joint kinematics and kinetics. Also for double-bundle reconstruction, with the numerically calculated optimal insertion sites, both bundles needed 50-N fixation force., Conclusions: With optimal graft positioning parameters, following the proposed workflow in this study, any of the single-bundle graft types and surgical techniques (single vs. double-bundle) may be used to acceptably recover the intact knee joint biomechanical behavior., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Introduction: In high tibial osteotomies (HTO) the correction needs to be precise and intra-operative assessment is essential. The purpose of this study was to evaluate the use of the intra-operative clinical mechanical axis measurement and compare it to the post-operative weight bearing situation on standing whole leg radiographs (WLR). Secondly, we evaluated the preoperative planned wedge size and compared it to the final results in 27 HTOs., Methods: The mechanical axis deviation (MAD), expressed as a percentage of the tibial width (0% is medial edge, 100% is lateral edge) and the hip-knee-ankle angle (HKA) were calculated and analyzed. Preoperative planning was done by projecting the desired mechanical axis on the lateral tibial spine on the WLR and subsequently calculating the necessary correction angle. A 3° valgus correction was desired., Results: The results showed a preoperative standing MAD of 26.6%, or about halfway the medial tibial plateau. The MAD was corrected to 57.0% intra-operative, meaning a slight valgus. On the postoperative standing WLR, the MAD had shifted significantly to 62.0% (95% CI=-9.2 to -2.7; p<0.01) compared to the intra-operative 57.0% axis. The HKA angle changed 8.2° from 5.1° varus preoperative to 3.1° valgus postoperative., Conclusion: When aiming the mechanical axis at the lateral tibial spine, a slight undercorrection was introduced, but due to a valgus shift while weight bearing, a satisfying final outcome of 3° valgus average was achieved. Preoperative calculation of the wedge size remains important for surgical planning, but it does not always correspond to the actual used wedge size., (Copyright © 2012 Elsevier B.V. All rights reserved.)