Search

The papillomavirus capsid is a nonenveloped icosahedral shell formed by the viral major structural protein, L1. It is known that disulfide bonds between neighboring L1 molecules help to stabilize the capsid. However, the kinetics of inter-L1 disulfide bond formation during particle morphogenesis have not previously been examined. We have recently described a system for producing high-titer papillomavirus-based gene transfer vectors (also known as pseudoviruses) in mammalian cells. Here we show that papillomavirus capsids produced using this system undergo a maturation process in which the formation of inter-L1 disulfide bonds drives condensation and stabilization of the capsid. Fully mature capsids exhibit improved regularity and resistance to proteolytic digestion. Although capsid maturation for other virus types has been reported to occur in seconds or minutes, papillomavirus capsid maturation requires overnight incubation. Maturation of the capsids of human papillomavirus types 16 and 18 proceeds through an ordered accumulation of dimeric and trimeric L1 species, whereas the capsid of bovine papillomavirus type 1 matures into more extensively cross-linked forms. The presence of encapsidated DNA or the minor capsid protein, L2, did not have major effects on the kinetics or extent of capsid maturation. Immature capsids and capsids formed from L1 mutants with impaired disulfide bond formation are infectious but physically fragile. Consequently, capsid maturation is essential for efficient purification of papillomavirus-based gene transfer vectors. Despite their obvious morphological differences, mature and immature capsids are similarly neutralizable by various L1- and L2-specific antibodies.

The human papillomavirus (HPV) capsid is primarily composed of a structural protein denoted L1, which forms both pentameric capsomeres and capsids composed of 72 capsomeres. The L1 protein alone is capable of self-assembly in vivo into capsidlike structures referred to as viruslike particles (VLPs). We have determined conditions for the quantitative disassembly of purified HPV-11 L1 VLPs to the level of capsomeres, demonstrating that disulfide bonds alone are essential to maintaining long-term HPV-11 L1 VLP structure at physiological ionic strength. The ionic strength of the disassembly reaction was also important, as increased NaCl concentrations inhibited disassembly. Conversely, chelation of cations had no effect on disassembly. Quantitative reassembly to a homogeneous population of 55-nm, 150S VLPs was reliably achieved by the re-formation of disulfide linkages following removal of reducing agent at near-neutral pH and moderate NaCl concentration. HPV-11 L1 VLPs could also be dissociated by treatment with carbonate buffer at pH 9.6, but VLPs could not be regenerated following carbonate treatment. When probed with conformationally sensitive and/or neutralizing monoclonal antibodies, both capsomeres generated by disulfide reduction of purified VLPs and reassembled VLPs formed from capsomeres upon removal of reducing agents exhibited epitopes found on the surface of authentic HPV-11 virions. Antisera raised against either purified VLP starting material or reassembled VLPs similarly neutralized infectious HPV-11 virions. The ability to disassemble and reassemble VLPs in vitro and in bulk allows basic features of capsid assembly to be studied and also opens the possibility of packaging selected exogenous compounds within the reassembled VLPs.

The lack of a permissive system for the propagation of viral stocks containing abundant human papillomavirus (HPV) particles has hindered the study of infectivity and the early stages of HPV replication. The organotypic (raft) culture system has permitted the study of a number of the differentiation-specific aspects of HPV, including amplification of viral DNA, expression of late genes, and viral morphogenesis. However, these investigations have been limited to a single virus type, namely, HPV type 31 (HPV31). We have artificially introduced linearized HPV18 genomic DNA into primary keratinocytes by electroporation, followed by clonal expansion and induction of epithelial stratification and differentiation in organotypic culture. We report the synthesis of infectious HPV18 virions. Virus particles approximately 50 nm in diameter were observed by electron microscopy. HPV18 virions purified by isopycnic gradient were capable of infecting keratinocytes in vitro, as shown by the expression of multiple HPV18-specific, spliced transcripts.

We report a system for generating infectious papillomaviruses in vitro that facilitates the analysis of papillomavirus assembly, infectivity, and serologic relatedness. Cultured hamster BPHE-1 cells harboring autonomously replicating bovine papillomavirus type 1 (BPV1) genomes were infected with recombinant Semliki Forest viruses that express the structural proteins of BPV1. When plated on C127 cells, extracts from cells expressing L1 and L2 together induced numerous transformed foci that could be specifically prevented by BPV neutralizing antibodies, demonstrating that BPV infection was responsible for the focal transformation. Extracts from BPHE-1 cells expressing L1 or L2 separately were not infectious. Although Semliki Forest virus-expressed L1 self-assembled into virus-like particles (VLPs), viral DNA was detected in particles only when L2 was coexpressed with L1, indicating that genome encapsidation requires L2. Expression of human papillomavirus type 16 (HPV16) L1 and L2 together in BPHE-1 cells also yielded infectious virus. These pseudotyped virions were neutralized by antiserum to HPV16 VLPs derived from European (114/K) or African (Z-1194) HPV16 variants but not by antisera to BPV VLPs, to a poorly assembling mutant HPV16 L1 protein, or to VLPs of closely related genital HPV types. Extracts from BPHE-1 cells coexpressing BPV L1 and HPV16 L2 or HPV16 L1 and BPV L2 were not infectious. We conclude that (i) mouse C127 cells express the cell surface receptor for HPV16 and are able to uncoat HPV16 capsids; (ii) if a papillomavirus DNA packaging signal exists, then it is conserved between the BPV and HPV16 genomes; (iii) functional L1-L2 interaction exhibits type specificity; and (iv) protection by HPV virus-like particle vaccines is likely to be type specific.

The capsid proteins of papillomavirus self-assemble to form empty capsids or virus-like particles that appear quite similar to naturally occurring virions by conventional electron microscopy. To characterize such virus-like particles more fully, cryoelectron microscopy and image analysis techniques were used to generate three-dimensional reconstructions of capsids produced by vaccinia virus recombinants (V capsids) that expressed human papillomavirus type 1 L1 protein only or both L1 and L2 proteins. All V capsids had 72 pentameric capsomers arranged on a T = 7 icosahedral lattice. Each particle (approximately 60 nm in diameter) consisted of an approximately 2-nm-thick shell of protein with a radius of 22 nm with capsomers that extend approximately 6 nm from the shell. At a resolution of 3.5 nm, both V capsid structures appear identical to the capsid structure of native human papillomavirus type 1 (T. S. Baker, W. W. Newcomb, N. H. Olson, L. M. Cowsert, C. Olson, and J. C. Brown, Biophys. J. 60:1445-1456, 1991), thus implying that expressed and native capsids are structurally equivalent.

The L1 genes of two human papillomavirus type 16 (HPV16) isolates derived from condylomata acuminata were used to express the L1 major capsid protein in insect cells via recombinant baculoviruses. Both L1 major capsid proteins self-assembled into virus-like particles (VLP) with high efficiency and could be purified in preparative amounts on density gradients. The yield of VLP was 3 orders of magnitude higher than what has been obtained previously, using L1 derived from the prototype HPV16. DNA sequence comparison identified a single nonconserved amino acid change to be responsible for the inefficient self-assembly of the prototype L1. VLP were also obtained by expressing L1 of HPV6, HPV11, and cottontail rabbit papillomavirus, indicating that L1 from a variety of papillomaviruses has the intrinsic capacity to self-assemble into VLP. Coexpression of HPV16 L1 plus L2 by using a baculovirus double-expression vector also resulted in efficient self-assembly of VLP, and the average particle yield increased about fourfold in comparison to when L1 only was expressed. Coimmunoprecipitation of L1 and L2 and cosedimentation of the two proteins in a sucrose gradient demonstrated that L2 was incorporated into the particles. The ability to generate preparative amounts of HPV16 L1 and L1-L2 VLP may have implications for the development of a serological assay to detect anti-HPV16 virion immune responses to conformational epitopes and for immunoprophylaxis against HPV16 infection.

Human papillomavirus type 16 (HPV-16) is strongly associated with carcinoma of the cervix, but the complete life cycle of the virus cannot be studied because no experimental system is available in which HPV-16 progeny are produced, and there is currently no source of HPV-16 virus particles. Most cell lines that harbor HPV-16 DNA contain the viral genome as integrated or concatenated DNA in which open reading frames are disrupted or deleted, but a human cervical keratinocyte cell line has been described which maintains HPV-16 DNA in monomeric episomal form (M.A. Stanley, H.M. Brown, M.W. Appleby, and A.C. Minson, Int. J. Cancer 43:672-676, 1989). This cell line was induced to form a stratified differentiating epithelium by grafting onto nude mice. Long-term grafts displayed the histological features of a low-grade cervical dysplasia, and terminally differentiated cells contained amplified levels of HPV-16 DNA, virus capsid antigen, and virus particles. This experimental system appears to permit the completion of the HPV-16 life cycle in virus-containing keratinocytes.

A human papillomavirus (HPV) was isolated from the lesions of a patient (ML) bearing numerous hand common warts. This virus was compared with the well-characterized HPV found in typical plantar warts (plantar HPV). ML and plantar HPV DNAs have similar molecular weights (5.26 x 10(6) and 5.23 x 10(6), respectively) but were shown to be different by restriction enzyme analysis. When the cleavage products of both DNAs by endonuclease EcoRI, BamI, HpaI, or Hind were analyzed by electron microscopy, one, two, one, and four fragments were detected for ML HPV DNA instead of the two, one, two, and six fragments, respectively, detected for plantar HPV DNA. In contrast to plantar HPV DNA, a high proportion of ML HPV DNA molecules were resistant to these restriction enzymes. Most, if not all, of the molecules were either resistant to BamI and sensitive to EcoRI or sensitive to BamI and resistant to EcoRI. After denaturation and renaturation of the cleavage products of ML HPV DNA by a mixture of the two enzymes, the circular "heteroduplexes" formed showed one to three heterology loops corresponding to about 4 to 8% of the genome length. No sequence homology was detected between ML and plantar HPV DNAs by cRNA-DNA filter hybridization, by measuring the reassociation kinetics of an iodinated plantar HPV DNA in the presence of a 25-fold excess of ML HPV DNA, or by the heteroduplex technique. The two viruses had distinct electrophoretic polypeptide patterns and showed no antigenic cross-reaction by immunodiffusion or immunofluorescence techniques. Preliminary cRNA-DNA hybridization experiments, using viral DNAs from single or pooled plantar or hand warts, suggest that hand common warts are associated with viruses similar or related to ML HPV. The existence of at least two distinct types of HPVs that cause skin warts was demonstrated; they were provisionally called HPV type 1 and HPV type 2, with plantar HPV and ML HPV as prototypical viruses, respectively.