Search

This paper deals with the results of a study of the thermodestruction of the earlywood and latewood in the 1988-1998 growth rings of Gmelin larch ( Larix gmelinii (Rupr.) Rupr.) trees growing along the polar tree line (7052′53″N, 102°58′26″E, Taimyr Peninsula). The study used methods of thermogravimetry (TG/DTG) and differential scanning calorimetry (DSC). Thermogravimetric data obtained were analyzed by Ozawa-Flynn-Wall kinetic model. We determined macrokinetic parameters of thermodestruction. Earlywood and latewood showed no significant difference in cellulose/hemicellulose/lignin ratio, whereas they differed significantly in destruction average value of activation energy (197.55 and 55.90 kJ mol, respectively). Our analysis of the correlation of thermodestruction values with mean monthly air temperature and precipitation revealed that component composition of both earlywood and latewood was influenced more by the weather conditions at the beginning of the growing season (April-June). Air temperature had markable influence on the wood component composition during cell wall synthesis only in latewood, whereas precipitation influenced the composition in both latewood and earlywood. TG/DTG and DSC methods were found to be promising for developing information on biochemical composition of early and latewood tracheids in stems and for identifying the extent of the influence of climatic changes on cell wall synthesis. [ABSTRACT FROM AUTHOR]

In this study, silica sol (SiO sol) and KCO were used as flame retardants for wood. The synergistic effect of SiO sol and KCO on the flame retardancy, leaching resistance, and thermal properties of wood was investigated. The limiting oxygen index results revealed a significant improvement in the flame retardancy and leaching resistance of the wood sample treated with KCO and SiO sol using the double bath technique. The thermal analysis results showed that the synergistic effect of KCO and the SiO sol effectively prolonged the degradation of the wood sample during the charring stage and improved the stability of the char residue. The thermogravimetry-mass spectrometry analysis and scanning electron microscopy results showed that KCO catalyzed the degradation reaction of the wood sample at lower temperatures resulting in an increase in the water and carbon dioxide output, and the SiO sol formed a compact and melted barrier on the surface of the char residue, which hindered the transfer of heat and combustible gases in the condensed phase. Thus, the combination of KCO and SiO sol proves to be a promising flame-retardant system for wood. [ABSTRACT FROM AUTHOR]

Thermal treatment is one of environmental friendly wood modification processes, developed in order to improve wood’s natural durability and dimensional stability. Beside wood species, mainly isothermal temperature of heat-treatment and process duration affect these properties, which also correlate with the mass losses caused by the treatment. However, there is a lack of suitable external quality control methods. In this work thermogravimetry as a potential method for determining the degree of thermal modification is presented. Several calibration curves, representing the mass losses in a certain temperature range (the values obtained from the TG curves) compared to weight losses caused by previous heat-treatment (known values), were established for spruce wood samples modified at different isothermal temperatures (from 170 to 220 °C). Linear plot and good correlation factors ( R2 = 0.95 and 0.96) were obtained for the TG mass losses from 130 to 280 °C and from 130 to 300 °C, both under nitrogen atmosphere. The predominant cause of mass loss in this temperature region was depolymerisation and thermal decomposition of hemicelluloses residues. Lower correlation factors were obtained under the air atmosphere and in the wider temperature range, respectively. [ABSTRACT FROM AUTHOR]